Laserliner 080-937 DistanceMaster Compact Pro Instructions

Laserliner 080-937 DistanceMaster Compact Pro

Function / Application

Laser distance meter with colour display

• For measuring length, area and volume
• Bluetooth®* interface to transfer the measured data
• Function for angle measurement
• Min/Max function for determining diagonals, verticals and horizontals

General safety instructions

• The device must only be used in accordance with its intended purpose and within the scope of the specifications.
• The measuring tools and accessories are not toys. Keep out of reach of children.
• Modifications or changes to the device are not permitted, this will otherwise invalidate the approval and safety specifications.
• Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
• The device must no longer be used if one or more of its functions fail or the battery charge is weak.
• Please ensure compliance with the safety regulations set out by local and national authorities with regard to the correct and proper use of the device.

Safety instructions

Using class 2 lasers

• Attention: Do not look into the direct or reflected beam.
• Do not point the laser beam towards persons.
• If a person‘s eyes are exposed to class 2 laser radiation, they should shut their eyes and immediately move away from the beam.
• Tampering with (making changes to) the laser device is not permitted.
• Under no circumstances should optical instruments (magnifying glass, microscope, binoculars)
  Safety instructions

Dealing with electromagnetic radiation

• The measuring device complies with electromagnetic compatibility regulations and limits in accordance with the EMC Directive 2014/30/EU which is covered by the Radio Equipment Directive 2014/53/EU.

DistanceMaster Compact Pro

• Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in the vicinity of people with pacemakers – may apply. Electronic devices can potentially cause hazards or interference or be subject to hazards or interference.
• The measuring accuracy may be affected when working close to high voltages or high electromagnetic alternating fields.

Dealing with RF radiation

• The measuring device is equipped with a wireless interface.
• The measuring device complies with electromagnetic compatibility and wireless radiation regulations and limits in accordance with the RED 2014/53/EU.
•  Umarex GmbH & Co. KG hereby declares that the DistanceMaster Compact Pro radio equipment complies with the essential requirements and other provisions of the European Radio Equipment Directive 2014/53/EU (RED). The EU Declaration of Conformity can be found in its entirety at the following address: http://laserliner.com/info?an=ACH

Inserting batteries (see Fig. A)

Open the battery compartment and insert batteries according to the symbols. Be sure to pay attention to polarity.

DISPLAY

1. Display length / area / volume / Angle function 1 + 2 + 3
2. Bluetooth®* function
3. Malfunction / service required d Memory
4. Bluetooth®* function activated f Battery symbol
5. Measured value, angle function h Intermediate values / min/max values
6. Measurement values /Measurement results Unit m / ft / inch / ‘ “
7. min/max continuous measurement
8. Measurement point (reference) rear / front
9. The bar diagram shows how well suited the reflection surface is for measurement. This is particularly useful for measuring over long distances, dark surfaces or bright ambient light.

KEYPAD

1.  ON / Measure / min/max continuous measurement
2. Length / area / volume / Angle function 1 + 2 + 3 / Bluetooth®* function / Memory
3.  Measurement point (reference) rear / front / Unit of measure m / ft / inch / ‘ “ / enable Bluetooth®* function
4. OFF / delete last measurement values

Switch on, measure and switch off

Change unit of measure

m / ft / inch / ‘ “

Delete the last measured value

Change measurement point (reference)

Change measurement functionLength measurementArea measurementVolume measurementAngle function 1

The measurement results are determined automatically by the 360° inclination sensor.

Angle function 2

The measurement result is determined by the 360° inclination sensor.

Angle function 3

The measurement result is determined by the 360° inclination sensor.

Angle function 1, 2, 3: The back of the device can be used as a reference surface for measuring angles.

min/max continuous measurement:

The LC display shows the max value, the min value and the current value.

Data transfer

The laser distance meter features a Bluetooth® function that enables wireless data transfer to mobile devices with a Bluetooth® interface (e.g. smartphone, tablet).
The system prerequisites for a Bluetooth® connection are specified at http://laserliner.com/info?an=ble
The device can set up a Bluetooth® connection with Bluetooth 4.0 compatible devices.
The range is set to a maximum distance of 10 m from the terminal device and greatly depends on the ambient conditions such as the thickness and composition of walls, sources of interference as well as the transmit / receive properties of the terminal device.

• The Bluetooth® word mark and the logo are registered trademarks of Bluetooth SIG Inc.

Enable / disable Bluetooth®*

When enabled the Bluetooth®* symbol appears on the display (e). When the function is active, a mobile device can connect by means of an app to the measuring device.

• The Bluetooth® word mark and the logo are registered trademarks of Bluetooth SIG Inc.

Application (app)

An app is required to use the Bluetooth® function. You can download the app from the corresponding stores for the specific type of terminal device:Make sure that the Bluetooth® interface of the mobile device is activated. After starting the app and activating the Bluetooth®* function, a connection can be set up between a mobile device and the laser distance meter.
If the app detects several active measuring devices, select the matching device.
This measuring device can be connected automatically the next time it is switched on.

• The Bluetooth® word mark and the logo are registered trademarks of Bluetooth SIG Inc.

Memory function

Important notices

• The laser points to the location that will be measured.
• No objects may get into the laser‘s line of measurement.
• The device compensates the measurement for different room temperatures. Therefore allow the device a brief adaptation period when changing locations with large temperature differences.
• The device is only conditionally useable in outdoor areas and cannot be used in strong sunlight.
• The measurement results of outdoor measurements may be influenced or falsified by rain, fog and snow.
• In unfavourable conditions, e.g. with poorly reflecting surfaces, the maximum deviation may be greater than 3 mm.
• Carpeting, upholstery or curtains will not reflect the laser optimally. Measure to flat surfaces.
• Measurements made through glass (window panes) can falsify measurement results.
•  An energy-saving function switches the device off automatically.
• Clean with a soft cloth. Water may not be allowed to penetrate the housing.

Error codes:

• Err101: Replace the battery
• Err104: Calculation error
• Err152: Temperature is too high: > 40°C
• Err153: Temperature is too low: < 0°C
• Err154: Outside the measuring range
• Err155: Received signal too weak
• Err156: Received signal too strong
• Err157: Incorrect measurement or background is too bright
• Err160: The device is moving too much to measure

Information on maintenance and care

Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents. Remove the battery(ies) before storing for longer periods. Store the device in a clean and dry place.

Calibration
The meter needs to be calibrated and tested on a regular basis to ensure it produces accurate measurement results. We recommend carrying out calibration once a year.

Technical Data

(Subject to technical changes without notice. Rev18W48)

Technical Data

(Subject to technical changes without notice. Rev18W48)

Distance measurement
Precision (typical)*| ± 2 mm
Inside measurement range| 0,1 m – 50 m
Angle measurement**
Measuring range| ± 90°
Resolution| 0,1°
Precision| 0,1°
Laser class| 2 < 1 mW
Laser wavelength| 650 nm

Operating conditions

| -10°C … 40°C, max. humidity 80% rH, no condensation, max. working altitude 2000 m above sea level
Storage conditions| -20°C … 70°C, max. humidity 80% rH

Radio module operating data

| Bluetooth LE 4.x interface; Frequency band: ISM band 2400–2483.5 MHz, 40 channels; Transmission power: max. 10 mW; Bandwidth: 2 MHz;

Bit rate: 1 Mbit/s; Modulation: GFSK/FHSS

Automatic switch-off| 30 sec laser / 10 min device
Power supply| 2 x AAA 1.5 Volt batteries
Technische Daten (Subject to technical changes without notice)

Dimensions (W x H x D)| 43 x 110 x 27 mm
Weight (incl. batteries)| 100 g

• measuring distance up to 10 m with strongly reflective target surface and at room temperature. The measurement deviation may increase by ± 0.2 mm/m for greater distances and under unfavourable measuring conditions such as strong sunlight or weakly reflective target surfaces.
  ** at max. 5000 lux

EU directives and disposal

This device complies with all necessary standards for the free movement of goods within the EU.
This product is an electric device and must be collected separately for disposal according to the European Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at: http://laserliner.com/info?an=ACH

SERVICE
Umarex GmbH & Co KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Germany Tel.: +49 2932 638-300, Fax: +49 2932 638-333 info@laserliner.com
Umarex GmbH & Co KG Donnerfeld 2 59757 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: -333 www.laserliner.com

References

• Info - Laserliner
• Info - Laserliner
• Info - Laserliner
• Info - Laserliner
• Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>