THITRONIK NFC Modul User Guide
- October 30, 2023
- THITRONIK
Table of Contents
THITRONIK NFC Modul
Product Information
The Thitronik NFC module is a wireless module that is designed to be used for controlling the Thitronik alarm system. It is compliant with the requirements and regulations of the directive 2014/53/EU. The NFC module should not be used for any other technical applications as it may result in damage to the product and danger to persons and property. The manufacturer accepts no liability for damage caused by improper use of the NFC module.
Product Usage Instructions
To commission the Thitronik NFC module, follow the steps below:
- Remove the battery strap from the module.
- Start the teach mode of the alarm control panel.
- Hold the NFC tag on the module for 3 seconds to teach it.
- Exit the teach mode of the alarm control panel and the NFC module.
- To add more NFC tags, hold the NFC tag on the module for 3 seconds while in teach mode.
To install the Thitronik NFC module, follow the steps below:
- Find a suitable place in the vehicle.
- Clean the surface where you plan to stick the NFC module.
- Stick on the NFC module.
Commissioning
- Remove battery strap
- Start the teach mode of the alarm control panel
- Trigger NFC module with enclosed card
- Exit the teach mode of the alarm control panel (See manual from step 2.)
- Remove the protective film from the adhesive surfaces
- Find a suitable place in the vehicle, clean the surface and stick on the NFC module
Teaching additional NFC tags
- Turn to open
- Start teach mode of the NFC module
- Hold NFC tag on module
- Exit teach mode
Technical data
- Communication : NFC – Near Field Communication | Mifare DESFire® EV2 | ISO14443- (13,56MHz)
- Power supply : Batteries: 3 × Alkaline (LR03) AAA | Voltage 3 × 1,5 V = 4,5 V
- Battery life : Up to 1 year
- Radio range : Communication with the control unit – up to 75 m
- KeyCard range : Up to 35 mm to the NFC module
- Radio frequency : 868,35 MHz
- Compatibility : WiPro III | WiPro III safe.lock | WiPro easy | C.A.S. III
- Operating temperature : –10° C bis +70° C
- Dimensions (Ø × D): 89 × 19,5 mm
- Weight : 100 g
- Scope of deliver : NFC Modul | KeyCard | Adhesive pad | 3 × Alkaline (LR03) AAA Batteries
Thitronik GmbH hereby declares that this product complies with the requirements and regulations of the directive 2014/53/EU. The full declaration of conformity is available for download: https://www.thitronik.de/support
The NFC module may only be used for wireless control of the THITRONIK alarm system. Any other use, in particular use for other technical applications, is prohibited and may result in damage to the product and danger to persons and property. The manufacturer accepts no liability for damage caused by improper use of the NFC module.
Thitronik GmbH | Finkenweg 9 – 15 · 24340 Eckernförde kontakt@thitronik.de | www.thitronik.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>