Yuanzhichuang A4 2BCCH-A4 Portable Printer User Manual
- June 17, 2024
- Yuanzhichuang
Table of Contents
Portable Printer
Instruction Manual
Product Information
| Product name | Portable Printer |
|---|---|
| Product model | A4 |
| Net product weight | 438g |
| Product size | 265mm58mm30mm |
| Print type | Thermal Printing |
| Input voltage | DC5V/2A |
| Battery capacity | 1000mAh |
| Automatic shut down | 30mins |
| Standby time | About30days |
| Charging time | About1.5H |
| Continuous printing | A4thermalpaper 90sheets |
| Paper width specification | 210mmor218mm |
| Charging interface | Type‐C |
Product structure
| Feed hole | Power switch Charging port |
|---|---|
| Exit hole | Open button |
Product packing list
Application installation
- For Apple users, you can also search for “iPrint” in the App Store to download the APP;
- Android users can also search for “iPrint” in the Google Play to download the APP.
Switch on and off
Power on: Long press the power button for 3 seconds until the indicator
light sup;
Shut down: Long press the power button for 3 seconds until the light is
off.
Feed operation
Paper jam, exception handling and cleaning
Press the open cover button to open the flapassembly and rotate ata certain
Angle. Do not force the paper out when the paper is jammed, other wiseit will
easily cause damage to the printer.
Connected application
After the device is turned on, turn on the Bluetooth function of the mobile phone, open the app, click the “Select equipment” button at the top, Go to the “My Device” page and click the Bluetooth name at the beginning of GT08 to connect the printer Bluetooth. If Bluetooth is not displayed after entering, please click refresh button and try again.
Pilot lamp
| Steady on | Bluetooth connected |
|---|---|
| flicker | Wait for connection |
| Red light | Charging |
Q&A
Q: No connected device is found when I add a device to the APP?
A: Please check whether the device is turned on to ensure that the Bluetooth is working.
Q: What can I do if my device cannot print?
A : ① Confirm whether the Bluetooth of the mobile phone is turned on, and exclude the possibility of others connecting tto this device. ② Check whether the thermal paper is jammed. ③ Whether the print head is overheating, if it is overheating, please wait for the print head to cool before trying to print.
Q: Why is the print all white paper, no content?
A: It maybe caused by incorrect installation of printing paper. Please refer to the introduction of Replacing printing paper to rein stall it.
Q: Why did the printed word fade?
A: ① Please check whether the device is low power. ② Check whether the print head is covered with stains, please wipe gently with an alcohol cloth
Safety and precautions
- Do not charge or use the printer in hot, humid or dusty places.
- Please charge with 5V2A input and charge with mobile phone power adapter.
- After printing, do not touch the print head directly to prevent overheating and scalding.
- Gently insert or remove the charging cable to prevent excessive force from damaging the interface.
- Improper charging may result in print head damage.
- Unplug the charging cable after charging.
- Place the machine on a solid and stable horizontal plane to prevent the machine from slipping and damaging.
- Please turn off the power when you do not use the machine for a long time.
- Prevent foreign matter from being transferred into the machine, so as not to cause failure or other risks.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>