Avantree SLP-370 Slumber Cushion Speakers User Manual

: June 12, 2024
: Avantree

Table of Contents

Avantree SLP-370 Slumber Cushion Speakers
Product Information
Box Contents
Product Introduction
Button Functions
LED Indicators
Getting Started
Choosing an Audio Mode
Setting a Sleep Timer
Specifications
FAQ
Contact Us
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Avantree SLP-370 Slumber Cushion Speakers

Avantree-SLP-370-Slumber-Cushion-Speakers-PRODUCT

Product Information

Product Name: Avantree Slumber
Model No.: SLP-370

Languages: English, German, French, Italian, Spanish

Box Contents

Slumber Cushion
Slumber Speakers
Remote Control
Aux 3.5 Audio Cable

Button Functions

ON/OFF Switch: Turn the Slumber on/off.
Bluetooth Mode/PAIRING Button:
- Press once to enter Bluetooth mode or manually reconnect to the last-paired device.
- Press and hold for 2 seconds to enter pairing mode.
MP3/AUX Mode Swap Button:
- Press once to enter AUX/MP3 mode.
- Press and hold for 2 seconds to switch among ordered/single cycle/shuffle playback modes (MP3 only).
Replay/Previous Track Button: Press once to replay or go to the previous track (Bluetooth/MP3 only).
Play/Pause Button: Press once to play/pause music.
EQ Mode Swap Button: Press once to switch between clear voice and well-balanced audio modes.
Volume Adjustment: Turn to adjust the volume.
Skip Button: Press once to skip to the next track (Bluetooth/MP3 only).
Clear Pairing History: Press and hold both buttons for 10 seconds to clear pairing history.
Sleep Timer Setup Button: Press once to cycle through sleep timer options (30 mins / 1hr / 2hr) or to cancel the timer.
Stereo/Mono Switch: Switch to put the Slumber in stereo/mono mode. Stereo mode splits audio between L & R speakers, while mono mode combines audio signals so both speakers receive the same audio.

LED Indicators

Playback Mode Indicator (A): Solid white for 30 seconds then off, indicates ordered/single cycle/shuffle playback mode (MP3 only).
Bluetooth Connection Indicator (B): Alternate red & blue flashes when pairing, solid blue for 30 seconds then off when connected.
Timer Indicator (C): Solid white for 30 seconds then off when timer is on.
AUX Mode Indicator (D): Solid white for 30 seconds then off when in AUX mode.
EQ Indicator (E): Solid white for 30 seconds then off when in clear voice mode.

Getting Started

Place the Slumber on top of your existing pillow or insert it into your pillow cover with both speakers facing upwards.
Connect the Slumber to a power source using the provided type C charging cable and a 5V/500mA-2A rated USB adapter or PC USB port.
Slide the switch to the ON position to turn the Slumber on.

Choosing an Audio Mode
You can choose to stream audio in three different ways: via MP3, Bluetooth, or AUX. The Slumber will default to the last-used mode each time it’s powered on.

Box Contents

Product Introduction

Product Overview

Button Functions

Avantree-SLP-370-Slumber-Cushion-Speakers-FIG-3

LED Indicators

In order to avoid disturbing your sleep, all LED indicators will turn ff after 30 seconds.

No.	Indicator	Status

A

| Solid white for 30 seconds then off| Ordered / single cycle / shuffle playback mode (MP3 only)

B

D

| Solid white for 30 seconds then off| AUX mode
E| Solid white for 30 seconds then off| Clear voice mode

Getting Started

You can use the Slumber by either placing it on top of your existing pillow, or by inserting it into your pillow cover. Make sure both speakers are facing upwards.

STEP 1
The Slumber must be connected to a power source via the provided power cable in order to function. Plug the provided type C charging cable into the charging port, then connect the other end to a 5V/500mA-2A rated USB adapter (your phone charger or similar should work) or PC USB port. Avantree-SLP-370
-Slumber-Cushion-Speakers-FIG-5

STEP 2

Slide the switch to the “ON” position to turn the Slumber on.

Choosing an Audio Mode

You can choose to stream audio in three different ways: via MP3, Bluetooth, or AUX. The Slumber will default to the last-used mode each time it’s powered on.

MP3 Mode
For first time use, the Slumber will enter MP3 mode automatically, playing the built-in white noises. If not, press the MP3/AUX button once to enter MP3 mode manually. You can change the playback mode by pressing & holding the button until the corresponding indicator turns solid white.

The Slumber contains a built-in 4GB storage card that it uses while in MP3 mode. In addition to the 10 enclosed white noise options, you can upload your own tracks by connecting the Slumber to your PC via the included USB C cable. Transfer your chosen files to the “Avantree Slumber” disc and enjoy!

AUX Mode
Plug the AUX 3.5mm audio cable into both the Slumber and your audio output device (i.e. your phone / PC / tablet), and the Slumber will enter AUX mode automatically. If not, press once to swap from MP3 mode or twice if you’re swapping from Bluetooth mode.

Avantree-SLP-370-Slumber-Cushion-Speakers-FIG-8

NOTE : The and buttons do not work in AUX mode.

Bluetooth Mode

STEP 1
Press the button once to enter Bluetooth mode. For first time use, the Slumber will enter PAIRING mode automatically. If not, put your Slumber into PAIRING mode by pressing & holding the button until the LED flashes blue and red alternately.
STEP 2
Turn on your device’s Bluetooth and select “Avantree Slumber” in the Bluetooth menu.
STEP 3
Keep them close and wait for 5-10 seconds or until they connect. Once connected, the Slumber’s Bluetooth connection indicator will turn solid blue.
For subsequent use, the Slumber should automatically reconnect to the last- paired device within a few seconds of being switched to Bluetooth mode. If not, you can manually activate reconnection by tapping the button once, or by selecting “Avantree Slumber” in your device’s Bluetooth menu.

NOTE : You’ll need to adjust the volume on both the Slumber & your audio device to reach the lowest volume level.

Setting a Sleep Timer

The sleep timer can be set to make the Slumber automatically turn ff after a specified amount of time. You can choose among 30 mins, 1 hour, or 2 hours by pressing the button. The corresponding LED will light up to indicate your selection.

Specifications

Bluetooth version	v5.3
Supported profiles	A2DP; AVRCP
Frequency response	20Hz-20KHz
Audio input level	1000mV
Rated Input	DC5V/500mA-2.0A
Operating range	Up to 30ft / 10m
Fabric	Polyester nylon
Speakers	28mm drivers, 40, 3W
Product dimensions	400mm x 135mm x 15mm
Net weight	215g

FAQ

Below are some of the most common questions people have during setup.

Is the pillow washable?
Yes, you can wash the pillow by hand whenever necessary. Please take out the speakers before washing. When re-assembling, make sure that the main speakers are facing upwards. You can find more specific directions on re-assembling at
avantree.com/support/slumber/install.

I turned the volume down as low as possible — why can someone else still hear?
Make sure to adjust the volume on both your device and the Slumber in order to reach the lowest volume levels. If the sound is still leaking, you can consider resting your ear directly on top of the speaker and turning the volume down even further.
You can find a full FAQ list at avantree.com/support/slumber, or contact us directly for additional assistance.

Contact Us

Support Tickets avantree.com/submit-a-ticket
Support Email support@avantree.com

USA / CA +1800 232 2078 (9am-6pm PST, Mon-Fri )
UK +44 20 8068 2023 (9am-6pm, GMT, Mon-Sat)
DE +49 32221097297 (11am-9pm, CET, Mon-Sat )
FR + 33 176340312 (11am-9pm, CET, Mon-Sat )
IT +39 06 9480 3330 (9am-6pm, CET, Mon-Sat )
ES + 34 931786261 (9am-6pm, CET, Mon-Sat )
AU + 61 2 8310 9897 (11am-7pm, AEST, Mon-Fri)