FRONT RUNNER RRAC257 Wolf Pack Pro Rack Mounting Bracket MKII Instruction Manual
- June 12, 2024
- Front Runner
Table of Contents
RONT RUNNER RRAC257 Wolf Pack Pro Rack Mounting Bracket MKII
Product Information
The Front Runner Wolfpack Pro Mounting Bracket is a versatile accessory designed to securely attach the Wolf Pack Pro storage box (sold separately) to a rack. It comes with all the necessary components, including bottom brackets, clamp brackets, M8x10 button head bolts, and M8 thin nuts. The bracket is compatible with both SBOX031 (Low Lid) and SBOX062 (High Lid) Wolf Pack Pro boxes.
Product Usage Instructions
- Before starting, familiarize yourself with the fitting instructions and the included components listed on page 2 of the user manual.
- Gather the necessary tools, which include a 5mm wrench or socket.
- Decide where on the rack you want to fit your Wolf Pack Pro storage box. Refer to Figure 1.1 in the manual for guidance.
- Slide M8 thin nuts (Item 4) into the chosen slats on the rack.
- Loosely fit the bottom brackets using the provided M8x10 button head bolts and M8 thin nuts.
- Place your Wolf Pack Pro onto the rack between the Wolf Pack Pro catch brackets.
- Move the brackets snugly against the Wolf Pack Pro and then fully tighten them.
- Secure the Wolf Pack Pro using the clamp bracket (Item 2).
- Congratulations! Your Wolf Pack Pro Mounting Bracket is now installed. Take a moment to admire your work.
For additional vehicle and rack accessories, visit your favorite Front Runner Dealer either in person or online. Be sure to share your adventures with Front Runner gear by tagging them on social media using #FrontRunnerOutfitters and
BornToRoam.
READ ME
- Thank you for purchasing a Front Runner Wolfpack Pro Mounting Bracket.
- Before you start, take a moment to familiarize yourself with the Fitting Instructions and the included components.
- Refer to Page 2 for a list of all the components, quantities and tools required.
IMPORTANT WARNING
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions. Please call us if you have any questions about the installation of this product.
CHECK ONLINE FOR THE LATEST FITMENT GUIDE
GET ORGANIZED
- 1 2 X Bottom Bracket
- 2 2 X Clamp Bracket
- 3 4 X M8 x 10 Button Head Bolt
- 4 4 X M8 Thin Nut
TOOLS NEEDED
INSTALLATION
FIT AND SECURE
Decide where on the rack you want to fit your Wolf Pack Pro. (Sold Separately SBOX31). Refer to FIG1.1
- A- Lengthways
- B- Widthways
Slide M8 thin nuts (Item 4) in the choosen slats. Loosely fit the Bottom Brackets as shown using, M8x10 Button Head Bolts & M8 Thin Nuts (Items 3 & 4).
Place your Wolf Pack Pro onto the rack between the Wolf Pack Pro catch brackets.Move the brackets sugly against the Wolf Pack Pro before fully tightening.
Secure the Wolf Pack Pro using the Clamp Bracket (Item 2).
FINISH: Congratulations! You did it. Take a step back and admire your work!
INSTALL OTHER VEHICLE AND RACK ACCESSORIES 4
Now’s the time to visit your favorite Front Runner Dealer in person or online
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters