CLAGE DEX 12 Next L Water Heater Installation Guide
- June 12, 2024
- CLAGE
Table of Contents
CLAGE DEX 12 Next L Water Heater
Product Information
- Product Name: DEX 12 Next
- Power Output: 8.8 kW / 11.5 kW
- Voltage: 230V
- Installation Type: Single-phase (1 phase)
- Installation Manual Version: 11.18
- Flow Rate: 4liters per minute
- Error Codes: L1, N, PE, SDB, STB
Product Usage Instructions
- Installation: – Ensure that the power supply is 230V.
- Connect the product to the power source using the provided electrical connections.
- Make sure the power switch is set to OFF.
- Connect the necessary plumbing connections.
- Refer to the installation manual version 11.18 for detailed instructions.
- Power Control: – To turn ON the product, set the power switch to ON.
- To turn OFF the product, set the power switch to OFF.
- Flow Rate Adjustment:
- The product has a flow rate of 4 liters per minute.
- Adjust the flow rate using the provided controls or valves.
- Error Troubleshooting:
- If any error codes are displayed on the product, refer to the error code list for troubleshooting steps.
- Error codes include L1, N, PE, SDB, and STB.
Note: Please refer to the complete user manual for additional information and safety precautions.
Installation 230V
Error?
Read User Manual Online (PDF format)
Loading......