HYTRONIK HC005S/BT Built-In Microwave Motion Sensor with Bluetooth 5.0 SIG Mesh Owner’s Manual
- June 12, 2024
- HYTRONIK
Table of Contents
Built-in Microwave Motion Sensor with ® 5.0 SIG Mesh
HC005S/BT
ON/OFF CONTROL
Product Description
HC005S/BT is a Bluetooth built-inmicrowave motion sensor with ON/OFF control. It is designed for professional lighting manufactures who would like to incorporate wireless control into their luminaires. HC005S/BT is suitable for any typical indoor applications such as office, classroom, car park, warehouse and other commercial/industrial areas. With Bluetooth wireless mesh networking, it makes communication much easier without any hardwiring, which eventually adds values to luminaires and saves costs for projects. Meanwhile, simple device setup and commissioning can be done via app.
App Features
| Quick setup mode & advanced setup mode
---|---
| Floorplan feature to simplify project planning
| Web app/platform for dedicated project management
| Koolmesh Pro iPad version for on-site configuration
| Grouping luminaires via mesh network
| Scenes
| Detailed motion sensor settings
| Dusk/Dawn photocell (Twilight function)
| Schedule to run scenes based on time and date
| Astro timer (sunrise and sunset)
| Staircase function (primary & secondary)
| Compatible with EnOcean BLE switches
| Internet-of-Things (IoT) featured
| Device firmware update over-the-air (OTA)
| Device social relations check
| Bulk commissioning (copy and paste settings)
| Power-on status (memory against power loss)
| Offline commissioning
| Different permission levels via authority management
| Network sharing via QR code or keycode
| Remote control via gateway support HBGW01
| Interoperability with Hytronik Bluetooth product portfolio
| Continuous development in progress…
Hardware Features
| Photocell Advance
---|---
| ON/OFF control with load ratings of:
– 300VA (capacitive)
– 400W (resistive)
| Compact design
| Zero crossing detection circuit to reduce in-rush current and prolong relay
lifetime
| Loop-in and loop-out terminals for efficient installation
| 5-year warranty
5.0 SIG mesh
|
---|---
https://apps.apple.com/cn/app/koolmesh/id1483721878|
https://play.google.com/store/apps/details?id=com.koolmesh.sig
Smartphone app for both iOS & Android platform
https://apps.apple.com/cn/app/koolmesh/id1570378349
Koolmesh Pro app for iPad
Web app/platform: www.iot.koolmesh.com
Fully support EnOcean self-powered switch module PTM215B (HBES01/W & HBES01/B)
Technical Specifications
Bluetooth Transceiver
Operation frequency| 2.4 GHz – 2.483 GHz
Transmission power| 4 dBm
Range (Typical indoor)| 10~30m
Protocol| ® 5.0 SIG Mesh
Sensor Data
Sensor principle| High Frequency (microwave)
Operation frequency| 5.8GHz+/-75MHz
Transmission power| ＜0.2mW
Detection range| Max installation height：6m
Max detection range：10m (diameter)
Detection angle| 30°~150°
Environment
Operation temperature| Ta: -20° C ~ +50° C
Case temperature(MAX.)| Tc:+75°
IP rating| IP20
Input & Output Characteristics
| Stand-by power | <1W |
|---|---|
| Operating voltage | 220~240VAC 50/60Hz |
| Load ratings | 300VA(capacitive),400W(resistive) |
| Warming-up | 20s |
Safety & EMC
EMC standard (EMC)| EN55015, EN61000, EN61547
Safety standard (LVD)| EN60669-1/2-1
AS/NZS 60669-1/-2-1
Radio Equipment
(RED)| EN300400, EN301489-1/-3
EN301489-17, EN62479,
EN300328
Certification| Semko,CB, CE , EMC, RED, RCM
- The detection range is heavily influenced by sensor placement (angle) and different walking paces. It may be reduced under certain conditions.
Mechanical Structure & Dimensions
Sensor Installation: In order to ensure good product performance, please avoid sensor being installed at or well below the LED gear tray/aluminum plate. It is highly recommended to expose the antenna part and Photocell Advance™ daylight sensor part by making a cut-out hole. For the Bluetooth module part, the cut-out hole is also recommended when the luminaire design is in a very confined metal environment where the Bluetooth signal transmittion can be potentially blocked or affected.
Wiring Diagram
Detection Pattern
Additional Information / Documents
1. For full explanation of Hytronik Photocell Advance™ technology, please
kindly refer to www.hytronik.com/download
->knowledge ->Introduction of Photocell Advance
2. To learn more about detailed product features/functions, please refer to
www.hytronik.com/download ->knowledge
->Introduction of App Scenes and Product Functions
3. Regarding precautions for Bluetooth product installation and operation,
please kindly refer to
www.hytronik.com/download ->knowledge
->Bluetooth Products – Precautions for Product Installation and Operation
4. Regarding precautions for microwave sensor installation and operation,
please kindly refer to
www.hytronik.com/download ->knowledge
->Microwave Sensors – Precautions for Product Installation and Operation
5. Data sheet is subject to change without notice. Please always refer to the
most recent release on
www.hytronik.com/products/bluetooth
technology ->Bluetooth Sensors
6. Regarding Hytronik standard guarantee policy, please refer to
www.hytronik.com/download ->knowledge
->Hytronik Standard Guarantee Policy
Subject to change without notice.
Edition: 18 Jun. 2021 Ver. A2