BEGA 67 546.3 Table Lamp For Indoor Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 67 546.3 Table Lamp For Indoor
Product Information
Product Description| Luminaire made of Aluminium, finish Polished aluminium
Hand-blown opal glass, with screw neck
---|---
Built-in Features| Mouth-blown opal glass, with screw neck
Power Supply| LED power supply unit 220-240 V x 0/50-60 Hz DC 176-276 V
Weight| 1.6 kg
Product Usage Instructions
- The luminaire must only be operated with the completeprotective cover.
- Insert the glass into the luminaire housing and screw it in by turning it clockwise. Make sure that the gasket is seated correctly.
- Connect the luminaire to the mains supply (230 V).
- To turn the luminaire on or off, use the toggle switch located in the lamp base.
- Do not operate the luminaire without its complete protective cover. If the LED diffuser glass is broken, it must be replaced. LED components are delicate and should not be touched directly.
DIMENSIONS
Instructions for use
Application
Table lamp · indoor luminaire made of metal base and hand-blown opal glass for
free radiating and glare-free light.
Product Description
- Luminaire made of Aluminium, finish Polished aluminum
- Hand-blown opal glass, with screw neck Built-in toggle switch
- Black cable · 2 m, with safety plug
- LED power supply unit 220-240 V x 0/50-60 Hz
- DC 176-276 V
- Safety class I
- CE – Conformity mark
- Weight: 1.6 kg
Safety
- The installation and operation of this luminaire are subject to national safety regulations.
- The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Overvoltage protection
- The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
- To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
- You can find them on our website at www.bega.com.
Lamp
- Module connected wattage 9 W
- Luminaire connected wattage 11 W
- Rated temperature ta = 25 °C
- Ambient temperature ta max = 30 °C
67 546.3 K3
- Colour temperature 3000 K
- Colour rendering index CRI > 85
- Module luminous flux 720 lm
- Luminaire luminous flux * 500 lm
- Luminaire luminous efficiency * 45,5 lm / W
67 546.3 K4
-
Colour temperature 4000 K
-
Colour rendering index CRI > 85
-
Module luminous flux 790 lm
-
Luminaire luminous flux * 548 lm
-
Luminaire luminous efficiency * 49,8 lm / W
-
preliminary data
Installation
- The luminaire must only be operated with the complete protective cover.
- Insert glass into the luminaire housing and screw it in by turning it clockwise.
- Make sure that the gasket is seated correctly. Connect luminaire to mains supply (230 V). To turn the luminaire on or off use the toggle switch in the lamp base.
Cleaning · Maintenance
- Disconnect the electrical installation.
- Clean luminaire regularly with solvent-free cleansers from dirt.
- A broken protective cover (LED diffuser glass) must be replaced.
- LED are high-quality electronic components!Please avoid touching the light output opening of the LED directly during installation or relamping.
- Loosen screws and remove the protective cover.
- Assemble protective cover (LED diffuser glass).
Spares
- Spare glass 11 002 908 41R G
- LED power supply unit DEV-0184/500
- LED module 65 000 309
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>