MURPHY DOOR 1689351746 Automated Door Opener with Mag-Lock Owner’s Manual
- June 12, 2024
- MURPHY DOOR
Table of Contents
MURPHY DOOR 1689351746 Automated Door Opener with Mag-Lock
The Automated Door Opener with Mag-Lock is designed to provide convenient and secure access to doors. It is equipped with a magnetic lock mechanism to ensure the door remains securely closed when not in use. This product is suitable for both residential and commercial applications.
Wiring Diagram
Please refer to the following wiring diagram for proper installation:
- Step Down Converter INPUT + (Red) to Yellow wire on the wiring harness
- + (Black) to the Green wire on the wiring harness
- OUTPUT + (Yellow) to Red wire on the wiring electromagnetic
- + (Black) to the Black wire on the wiring electromagnetic
- Please note that an additional 18 gauge wire will be required for installation.
- For any further assistance or inquiries, please contact us at:
- 2380 S 1900 W, West Haven, UT 84401 | MurphyDoor.com | 888.458.5911
Product Usage Instructions
- Ensure that the power source is disconnected before starting the installation process.
- Identify the appropriate location for the Automated Door Opener with Mag-Lock. Choose a spot that allows easy access and provides optimal security.
- Prepare the door and frame for installation by following the instructions provided in the door preparation manual.
- Once the door is prepared, connect the Step Down Converter according to the wiring diagram. Use the specified wire colors and connect them to their corresponding wires on the wiring harness and electromagnetic lock.
- Securely fasten all connections and ensure there are no loose or exposed wires.
- Connect the power source and test the door opener to ensure it functions properly.
- Adjust any settings or controls as necessary to meet your specific requirements.
- Regularly inspect and maintain the Automated Door Opener to ensure continued safe and reliable operation.
For detailed installation instructions, please refer to the installation manual provided with the product.
Automated Door Opener with Mag-Lock
Wiring Diagram
Step Down Converter
INPUT
- (Red) to Yellow wire on the wiring harness
- (Black) to Green wire on the wiring harness
OUTPUT
- (Yellow) to Red wire on the wiring electromagnetic
- (Black) to the Black wire on the wiring electromagnetic
- NOTE: Additional 18 gauge wire will be needed for installation.
- 2380 S 1900 W, West Haven, UT 84401 MurphyDoor.com 888.458.5911
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>