DYLECT DTPWTB1400 High Pressure Washer Owner’s Manual

DYLECT DTPWTB1400 High Pressure Washer

WARNING: Do not use the appliance without reading the instruction sheet.

• Scan for Warranty Registration and Customer Support

IMPORTANT SAFETY TIPS

Never point the high-pressure nozzle at people or animals.

Never drink alcohol or use drugs while operating the pressure cleaner.
Never operate the pressure cleaner while standing in water.
Never touch the electrical plug with wet hands.
Never let electrical connections rest in the water.
Never operate the pressure cleaner without the water being turned on.
Never use hot water with this pressure cleaner.

The device is intended for domestic use and for commercial use indoors and outdoors.

IMPORTANT SAFETY PRECAUTIONS

WARNING: When using this product, basic precautions should always be followed, including the following:

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard.
• The machines must not be used by children. Children should be supervised to ensure that they do not play with the appliance.

For commercial use

• This machine must not be used by persons (including children) with reduced physical, sensory or mental skills or lack of experience and knowledge.

Not for commercial use

• This machine can be used by persons with reduced physical, sensory or mental abilities
• Or lack of experience and knowledge when they are supervised or safe
• Use of the machine and understand the resulting dangers.
• Use suitable personal protective equipment (PSA) for high-pressure cleaners in operation, Eg safety shoes, protective gloves, protective visors, hearing protection, etc.,

Operation of the appliance;
Caution: Danger of recoil forces and the suddenly occurring torque on the nozzle when the spray gun is opened;

• WARNING: This machine has been developed for the use of the detergent supplied or recommended by the manufacturer. The use of other cleaning agents or chemicals can affect the safety of the machine.

• Warning: High-pressure jets can be dangerous if used improperly. The beam must not be directed at persons, active electrical equipment or on the machine itself.

• Do not use the appliance with people within its range of action unless they are wearing protective clothing.

• Do not point the jet at yourself or others to clean clothing or footwear.

• Disconnect the power supply before carrying out maintenance by the user.

• High-pressure cleaners must not be operated by children or unskilled persons.

• To ensure the machine’s safety, only original spare parts from the manufacturer or use spare parts approved by the manufacturer.

• Do not use the appliance if a power cable or important parts of the appliance are damaged, e.g. Safety devices, high-pressure hoses, or spray guns.

• If the extension cord is used, the plug and socket must be waterproof.

• WARNING: Unsuitable extension cables can be dangerous, if an extension cable is used, it must be suitable for outdoor use, and the connection must be kept dry and off the ground.The use of a power cable reel which keeps the socket at least 60mm above the ground is strongly recommended.

• Switch the appliance off and disconnect it from the power supply before assembly, cleaning, adjustments, maintenance, storage and transportation.

• The electric supply connection must be made by a qualified electrician and comply with IEC 60364-1. Either a residual current device that will cut off the power supply if the leakage current to earth exceeds 30 mA for 30 ms or a ground fault interrupt device must be installed. WARNING: Do not use the machine if a connecting cable or important parts of the machine are damaged, Eg safety devices, high-pressure hoses, or spray guns.

• The machines are not suitable for connection to portable water pipes. Connect the machine to the water supply.

• Use the device on a flat surface.

• For security reasons, make sure you have a three-month control and maintenance. Before use, make sure that the filter and the nozzle. Make sure there is no contamination. After use, make sure there is no water in the pump and hose.
  overload protection:

• When the nozzle is stuffed or the high-pressure hose is knotted, the overload protection function automatically and the machine is switched off.

• After solving the fault, turn the switch back on and turn the machine back on.

1. Read all instructions before using the product. Save all safety instructions.

2. Do not operate the pressure cleaner when fatigued or under the influence of alcohol or drugs.
3. Risk of injection or injury – do not direct the high-pressure water stream at any people or animals.
4. Do not allow children to operate the pressure cleaner at any time.
5. To reduce the risk of injury, close supervision is necessary when the pressure cleaner is used near children.
6. Know how to stop the unit and reduce pressure immediately. Be completely familiar with the controls.
7. Stay alert – always be aware of where you are directing the high-pressure spray
8. Keep the cleaning area clear of all people.
9. Keep good footing and balance at all times – do not overreach or stand on unstable support.
10. The work area should have adequate drainage to reduce the possibility of a fall due to slippery surfaces.
11. Follow the maintenance instructions specified in the manual.
12. To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch the plug with wet hands.
13. Adequate information about the nozzle to be used, the danger of the kickback force and the sudden torque on the spray assembly when opening the trigger gun
14. It is recommended that the electric supply to this machine should include either a residual current device that will interrupt the supply if the leakage current to earth exceeds 30 mA for 30 ms or a device that will prove the earth circuit
15. WARNING Do not use the machine within range of persons unless they wear protective clothing

16. WARNING Risk of explosion – Do not spray flammable liquids
17. WARNING High-pressure hoses, fittings and couplings are important for the safety ofthe machine. Use only hoses, fittings and couplings recommended by the manufacturer
18. Water that has flowed through a backflow preventer is considered non- potable.

GENERAL SAFETY PRECAUTIONS

1. Intended for outdoor and household use only.

2. High-pressure hose can develop leaks from wear, abuse, kinking etc. Do not use a damaged hose.
3. Do not use the pressure cleaner in areas near combustible materials, combustible fumes, or dust.
4. Some chemicals or detergents may be harmful if inhaled or ingested causing severe injury.

Use a respirator or mask whenever there is a chance that vapours may be inhaled. Read all instructions included with the mask so you are certain the mask will provide the necessary protection against inhaling harmful vapours.

5. Before starting the pressure cleaner in cold weather, check all of the parts of the equipment and be sure that ice has not formed. Do not store the unit anywhere that the temperature will fall below 0°C (32°F ).
6. DO NOT MAKE ANY MODIFICATIONS TO ANY OF THE COMPONENTS! Units with broken or missing parts, or without the protective housing or covers should NEVER be operated
7. Keep the high-pressure hose connected to the pressure cleaner and the spray gun while the system is pressurized. Disconnecting the hose while the unit is pressurized is dangerous, and may cause injury.
8. Always turn off the power disconnect when the machine is left unattended.
9 Keep water spray away from electrical wiring or fatal electric shock may result.
10. Must be connected to the water supply before use. Then open the gun trigger and open the cleaner switch.
11. After the machine is long-stalled again before use, please dial the few motor power is in the state of the impeller, and then start the machine according to the operation instruction

SYMBOLS
The labels on your tools and manual may show symbols. These represent important information about the product or instructions on its use.

• Indicates a potential personal injury hazard.
• In accordance with European directives applicable to this product.
• Double-insulated construction
• Do not be exposed to rain or use in damp locations.
• To reduce the risk of injury, users must read and understand the owner’s manual before using this product.
• Always wear safety goggles or safety glasses with side shields and, as necessary, A full face shield when operating this product.
• Use a respirator or mask whenever there is a chance that vapours may be inhaled.
• To reduce the risk of injection or injury, never direct a water stream towards people or pets or place any body part in the stream. Leaking hoses and fittings are also capable of causing injection injury. Do not hold hoses or fittings.
• To reduce the risk of injury from kickback, hold the spray lance securely with both hands when the machine is on.
• Failure to use in dry conditions and to observe safe practices can result in electric shock.
• Warning! Never point the gun at humans, animals, the machine body, the power supply or any electric appliances
• Machine is not intended to be connected to the potable water mains
• Waste electrical products should not be disposed of with household waste, please recycle where facilities exist. Check with your local authority or retailer for recycling advice.
• Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way.

SERVICING OF A DOUBLE-INSULATED APPLIANCE
In a double-insulated product, two systems of insulation are provided instead of grounding. No means of grounding is provided on a double-insulated product, nor should a means for grounding be added to the product. Servicing a double- insulated product requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated product must be identical to the parts they replace. A double-insulated product is marked with the words” DOUBLE INSULATION” or” DOUBLE INSULATED”. The product may also be marked with the symbol shown below.

USE OF EXTENSION CORDS
Use of an extension cord with this product is NOT RECOMMENDED. If you must use an extension cord, use only extension cords that are intended for outdoor use. These cords are identified by a marking “ACCEPTABLE FOR USE WITH OUTDOOR APPLIANCES, STORE INDOORS WHILE NOT IN USE.” Use only extension cords having an electrical rating not less than the rating of the product. Examine the extension cord before use. DO NOT USE DAMAGED EXTENSION CORDS! Do not pull on the cord to disconnect from the receptacle, always disconnect by pulling on the plug. Keep the cord away from heat and sharp edges. Always disconnect the extension cord from the receptacle before disconnecting the product from the extension cord.
WARNING – To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch the plug with wet hands.

PROPER USE OF THE PRESSURE CLEANER

• THIS UNIT IS INTENDED FOR USE WITH COLD WATER ONLY
• DO NOT USE HOT WATER IN THIS PRESSURE CLEANER.

1. Operate the pressure cleaner at no more than the fluid pressure rated for the pressure cleaner. Never run the pressure cleaner without a water supply. Running the unit without a water supply will cause irreparable damage to the unit.

2. Make sure that the water supply you use for the pressure cleaner is not dirty, or sandy, and does not hold any corrosive chemical products. Using a dirty water supply will compromise the long life of the pressure cleaner.
3. CAUTION – The pressure cleaner can be used for a variety of applications including washing cars, boats, patios, decks, garages etc. where high pressure is necessary to remove dirt and debris.

High-pressure water flow can damage the work surface if not used properly! See the section titled “Operating Instructions” for more details. Always test the spray in an open area first.

4. NEVER move the unit by pulling on the high-pressure hose. Use the handle provided on the top of the unit.
5. Always hold the high-pressure gun and wand with two hands. Keep one hand on the gun/trigger, while supporting the wand with the other hand (see diagram).
6. When dispensing detergent, the pressure cleaner applies detergent to the cleaning area at low pressure only. Once the detergent has been applied, spray the detergent off of the work area by using the adjustable nozzle.

ASSEMBLY INSTRUCTIONS

Unpacking the Carton
After opening the carton, please remove all parts and check them against the following list of components that are included:

1.| Adjustable nozzle| 2.| Soap Bottle|
---|---|---|---|---
3| Hose hook| 4.| Cleaning pin| 5.| Gun holder
6.| Manual| 7.| Screw package| 8.| Water inlet connector
9.| water inlet pipe| 10.| Water outlet pipe| 11.| Power cord
12.| ON/OFF switch| 13.| Power cable hook| 14.| Handle
15.| High-pressure hose| 16.| Lock-off switch| 17.| Gun

Model: DTPWTB1400

The machine always with handle to transport it.

PREPARATION OF OPERATION

HOW TO SET UP YOUR UNIT
Attach the gun, extension wand and adjustable nozzle

• A. Attach the middle extension lance to the gun
• Note: When attaching, align the two projections on the lance with the grooves on the wand.
• B. Attach the adjustable nozzle to the middle extension lance
• Note: When attaching, align the projection on the front lance with the groove on the middle extension lance with the button held.

Mounting the handle Screw the handle and hose hook tight to the main unit (4 screws).

Note: The screws will be packed together with the manual, pis kindly check and find it when unpacked.

• Install gun holder and power cable hook.

• Attach & detach the high-pressure hose

Attach one end of the high-pressure hose to the pressure water outlet of the machine and the other end of the high-pressure hose to the wand.
Note: After the high-pressure hose is connected, check the connection by gently pulling on the hose to ensure it stays connected. Push the lock button and pull to detach the high-pressure hose.
To detach the hose easily, please pull the trigger to drain water from the wand when an operation is completed and the switch is in the” OFF/II” position.

Attach the garden hose

• Remove the plastic plug from the water inlet pipe of the machine and Screw the water inlet connector onto the water inlet pipe, then Connect one end of the home garden hose (not supplied) to the water inlet connector and another end to water source.
• WARNING: The appliance is INTENDED to be used at a temperature above O degree.
• WARNING: The garden hose can not be damaged and leaked, the Inner diameter is less than 1/2 “inches, and the length can not be greater than 8m.

• Connect to the power supplier, Plug the pressure washer into the power outlet.

OPERATING

WARNING – DANGER!
Lil During operation the appliance must be positioned on a firm, stable surface.
WARNING: High-pressure hose must not loop.
Starting Up

1. Turn the water source on. Squeeze the trigger for about 1 minute until low-pressure water flows out to empty the air of the unit.
   Warning: This unit is intended to be used with cold water only! Do not use hot water in this pressure cleaner !

2. Turn the switch of the pressure wash to the “ON/I” position, then press the trigger.
   Note: Before pressing the trigger, make sure the lock-off switch is in the “unlock” position.
   Warning: Do not start the machine without connecting and turning on the water supply because it may cause damage to high-pressure seals and reduce the service life of the pump.

3. Cleaning
   Squeeze the trigger, high-pressure water flow will come out. You could rotate the Adjustable nozzle collar to change it from a full fan spray (diagram 1) to a direct stream spray (diagram 2).
   Warning: When operating the machine, it is forbidden to use it in the inverted state.
   Note: Begin with the nozzle 1-2ft away from the surface and approach with caution until it reaches the desired position for overly close spray may harm the surface.
   Warning: Do not connect the machine to water supplies that are dirty, rusty, muddy, or corrosive. ( Including window cleaning liquids, plant foods, fertilizers etc.)

4. When you finish your clean job, release the trigger and turn the switch to the “OFF/0” position, then turn off the water supply.
   Note: When not in use, make sure the Lock-off switch is in the “Lock” position.
   Note: when using the pressure washer after the water supply is off, serious damage could occur to the pump and/or motor.
   Warning: never disconnect the high-pressure discharge hose from the machine while the system is pressurized. To depressurize, turn the motor off, turn the water supply off and squeeze gun trigger 2-3 times.

5. Unplug the power cord from the power outlet.

WARNING: Check that the supply voltage and frequency correspond to those specified on the appliance data plate. The appliance should only be connected to a mains power supply via a security breaker (Max.30mA) to cut off the electricity supply in the instance of a short circuit.

INFORMATION FOR USAGE

Safety valve and/or pressure limiting valve

Warning-danger!
Do not tamper with or adjust the safety valve setting.

The safety valve is also a pressure-limiting valve. When the gun trigger is released, the valve opens, the pressure switch action and the machine automatically shuts down.a
If the gun nozzle is blocked, will cause the machine pressure to rise, the safety valve to open, the pressure switch action, and the machine automatically shut down, you can refer to the following to use a needle to clean the nozzle.
The safety button of the gun
The operator needs to press the unlock button and then actuate the trigger to do the spray operation. When you release the trigger, it can return to the off position automatically.
When not using the pressure cleaner, press the lock button to keep from accidentally engaging the high-pressure spray.

Hold the gun
Whenever you use the high-pressure washer, we suggest you grip the in the right position, with one hand on the handle and the other on the adjustable spray nozzle.
To wash with detergent

• Fill it with a properly formulated detergent or cleaner with a water ratio according to the instructions on the container. connect the nozzle to a wand.

• Press the wand trigger, detergent will come out through the nozzle.
• Apply detergent so it thoroughly covers the cleaning surface.
• Allow detergent to remain on the surface for a few minutes. This is a good time to use a brush to lightly scrub heavily soiled areas.
• Change to spray nozzle, Rinse detergent from the surface.
• Cleaning up: Always draw fresh water through the detergent bottle when done to flush any remaining detergents from the injection system. The bottle could be detached if necessary in this process.

MAINTENANCE

Any maintenance operations not covered by this chapter should be carried out by an Authorized sales and service centre.
Warning-danger

• Always disconnect the plug from the power socket before carrying out any work on the appliance.
• Cleaning of water inlet filter
• The water filter was installed inside the water inlet connector and should be cleaned periodically. Rinse it with clean tap water, and then place it back into the water inlet connector.

Cleaning the nozzle
Using the nozzle tip cleaner provided ( or an unfolded paper clip) , insert the wire into the nozzle hole and move back and forth until debris is dislodged. Back flush water through the nozzles using a garden hose and the highest pressure available (either standard water nozzle or use your thumb over the nozzle to create water pressure for back flush )

Cleaning of machine vents
The machine should be kept clean to let cooling air pass freely through the machine vents.
Greasing or couplings
To ensure easy connection and that the o-ring does not day up, the couplings should be greased regularly.

STORAGE

1. Disconnect the water source, turn on the pressure washers for a few seconds until the remaining water flows out, then turn it off quickly.
2. Unplug the power supply.
3. Disconnect the high-pressure hose and the garden hose (not supplied), and coil the high-pressure hose for storage.
4. Store in a frost-free area with a temperature above O” C (32°F).

TECHNICAL DATA

DYLECT – India E-Waste Program

• Be a Responsible User. Recycle or refurbish your old Amazon brand products to help protect the environment.

• The crossed-out bin symbol on this product or its packaging signifies that this product should be discarded separately from ordinary household waste at its end of life. Be aware that it is your responsibility to dispose of e-waste in such a manner that no damage to human health and the environment occurs.

• E-waste is generated from electronic and electrical appliances/components that have reached their end-of-life period or are no longer fit for their original intended use and are destined for recovery, recycling or disposal. E-waste when disposed of or recycled improperly, can cause severe environmental pollution and adversely affect the human body as it contains toxic chemicals. Please ensure that the electronic products that are unwanted, not working, and nearing or at the end of life are disposed of only through authorized recycling or refurbishing points. Please contact your municipal waste management authority or your household waste disposal service for additional details.

• This product and the components thereof conform to the provisions of hazardous substances specified under Rule 16 (1) and Rule 16 (4) of E-waste (Management) Rules, 2022 [Chapter VII titled the Reduction in the Use of Hazardous Substances in the Manufacture of electrical and electronic equipment and their components or consumables or parts or spares].

Warranty & Service

1. We grant [1] years warranty on the product commencing from the date of purchase against defects in manufacturing, materials, and assembly.
2. Within the warranty period, we will correct any defects in materials or workmanship, either by repairing or replacing the complete appliance, as we may choose, free of charge. This warranty is valid to the original purchaser only.
3. For customer service-related queries, please contact us: at [1800-258-6618] (available Monday to Saturday from 9:30 AM to 6:00 PM except national holidays). For warranty details, please visit the product page or call customer service number.

Scan for Warranty Registration and Customer Support

This Warranty excludes, or does not apply or becomes void if :

1. Damage is caused by improper use, abuse or excessive use outside the intended purpose.
2. Normal wear or use as well as defects that have a negligible effect on the value or operation of the appliance.
3. repairs or product modifications have been carried out by unauthorized organizations or persons and if original Amazon brand parts are not used.
4. Consequential damages (including but not limited to loss of data or loss of income), nor compensation for activities done by yourself.
5. The proof-of-purchase has been altered in any way or is made illegible.
6. The model number, serial number or production date code on the product has been altered, removed or made illegible.
7. The defect is caused by connecting peripherals, additional equipment or accessories other than those recommended in the user manual.

TROUBLESHOOTING

Please ensure that you check the following before contacting the service organization:

Defective socket Fuse has blown

Defective extension cable

| Plug in the machine.

Try another socket.

Replace the fuse, and switch off other machines.

Try without the extension cable.

Fluctuating pressure| Pump sucking air

Valves dirty, worn out or stuck Pump seals worn out

| Check that hoses and

connections are airtight.

Clean and replace or refer to a local distributor.

Clean and replace or refer to a local distributor.

Machine stops| Fuse has blown

Incorrect mains voltage

Thermal sensor-activated Nozzle partially blocked

| Replace fuse. Switch off other machines.

Check that the mains voltage corresponds to the specification on the model tag.

Leave the washer for 5 minutes to cool down.

Clean the nozzle.

Fuse blows| Fuse too small| Change to an installation higher than the amp. Consumption of the machine.

You may try without the extension cable.

Machine pulsating| Air in inlet hose/pump

Inadequate supply of mains water

Nozzle partially blocked Water filter blocked Hose kinked

| Allow the machine to run with an open trigger until regular working pressure resumes.

Check that the water supply corresponds to the specifications required.

Clean the nozzle.

Clean the filter. Straighten out the hose.

The machine often starts and stops by itself| The spray handle is leaking| Contact your nearest service centre.

Replace the seat/ball/a-ring in the valve of the spray handle.

The machine starts, but no water comes out| Pump/hose or accessory frozen

No water supply Water filter blocked

Nozzle blocked

| Wait for the pump/hoses or accessory to thaw.

Connect inlet water. Clean the filter.

Clean the nozzle.

In case problems other than the above occur, please contact your local distributor.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>