NEWBULIG C-2077 Ergonomic Armless Chair Instruction Manual

NEWBULIG C-2077 Ergonomic Armless Chair

Product Information

The product is a chair model C-2077. It comes with the following components:

• 1 Seat
• 1 Backrest
• 1 Gas Lift
• 1 Base
• 5 Casters
• 2 Bolts
• 1 Wrench

Product Usage Instructions

1. After successful installation, place the chair in a shaded outdoor area for 1-2 days.
2. To ensure longer use, re-tighten bolts every 6 months using the enclosed allen-key. Do not use an electric drill as it can damage the chair. Please re-tighten bolts manually.
3. For safety, sit in the center of the chair with your back to the backrest. Do not sit at the front edge of the chair.
4. Do not stand on the chair or use it with more than one person.
5. Do not push the chair around when someone is sitting in it.
6. Do not push down on the backrest when a person is reclined.
7. Do not place all your weight on only the backrest.
8. To assemble the chair:
   • Press the casters into the holes at the end of each leg of the base.
   • Insert the gas lift into the center of the base.
   • To adjust seat height, use the paddle-shaped lever located on the right side. To raise, lift the lever up while taking your weight off the chair. To lower, lift the lever up while seated.
   • Align the backrest with the seat and install the backrest to the seat using the provided bolts.
   • Align the center hole of the seat with the gas lift and press the seat down until it is fully secured.
9. Before using the chair, always check to ensure that all bolts are fully tightened. Lubricate all parts and tighten all bolts every 6 months or whenever needed.

Package List

After successful installation please put the chair in a shady outside for 1-2 days.

For longer use
Re-tighten bolts every 6 months by using the enclosed allen-key.
*Using an electric drill can damage the chair.
Please re-tighten the bolts manually.

Safety Information

• Sit in the center of the chair, with your back to the backrest.
• Do not sit at the front edge of the chair.
• Do not stand on the chair.
• Do not use the chair with more than one person.
• Do not push the chair around when a person is sitting in it.
• Do not push down on the backrest when a person is reclined.
• Do not place all your weight on only the backrest.

Assembly Instruction

1. Press the Casters (5)*5 into the holes at the end of each Leg of Base (4).
2. Insert the Gas Lift (3) into the center of the Base.
3. Align Back with Seat, install Back (2) to the Seat (1) with Bolts (6)*2.
4. Align the center hole of the Seat (1) with the Gas Lift (3) and press the Seat down until it is fully secured.

Seat Height: Paddle-shaped lever on the right side

• To raise: While taking your weight off the chair, lift the lever up.
• To lower: While seated, lift the lever up

CAUTION:

• Before using the chair, check to ensure that all bolts are fully tightened.
• Lubricate all parts and tighten all bolts every 6 months or whenever needed.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>