Laserliner HD 1500 LED Work Light Instruction Manual

Laserliner HD 1500 LED Work Light

Completely read through the operating instructions as well as the latest information under the internet link at the end of these instructions. Follow the instructions they contain. This document must be kept in a safe place and passed on together with the device.

Product Features

• Dual light source- 1500 lm Flood and 500 lm Spot, both with steeples dimming function.

• Flood has a wide angle of illumination and spot has a beam distance of 250 m, suitable for search light.

• SOS function that will emit flood light source for emergency situations.

• Glow in the dark fluorescent reflector allows lamp to be seen during dark conditions.

• Built in OSS (Object Sensor System) for user safety.
  HBS (Human Body Sensor) can be turned on to conserve power when user is away from lamp for an extended period of time.

• 7 in 1 ultra versatile bracket
  A Can be used as a stand.
  B Can rotate in 2 different axis.
  C 2 sets of super powerful magnets to secure on various metallic surfaces (flat, curved surfaces).
  D Clip with spring which can be opened to secure brackets on bars.
  E Can be clipped on utility belts.
  F Bottom side has a threaded nut for securing to tripod.
  G Has a special curved notch to hang on nail heads in tool racks.

• LCD screen to inform user on charging status, lumens level, battery remaining capacity and time and HBS status.

• Lamp will blink to warn user of low battery status, please charge lamp when low battery warning is activated.

• Built in diffuser transforms the already wide angle flood light to an all surrounding area light.

General safety instructions

• The device must only be used in accordance with its intended purpose and within the scope of the specifications.
• Modifications or changes to the device are not permitted, this will otherwise invalidate the approval and safety specifications.
• Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
• Do not point the beam of light directly into the eyes of people, particularly those wearing glasses or contact lenses (high dazzling effect) or animals.
• Under no circumstances should you look directly into the light produced by this device or when it is reflected off specular surfaces.
• Close your eyes and move your head away from the beam of light if optical radiation hits your eyes.
• Avoid heat build-up during use, for example, due to the covering the device.
• Do not place the lamp in front of inflammable material when in use. It could ignite.
• Do not use the lamp in traffic.
• Do not leave the lamp unsupervised with children.
• Before using the lamp for the first time, the battery must be fully charged.
• The lamp has an indicator for charging and battery capacity.
• Recharge frequently.
• Always replace the battery with an original 4K5 battery.
• Do not leave the battery without charge for an extended period. Deep discharge risks damaging the battery.
• The light source of this lamp is not replaceable; when the light source reaches its end of life the whole lamp shall be replaced.

Safety instructions

Danger – powerful magnetic fields

• Powerful magnetic fields can adversely affect persons with active medical implants (e.g. pacemaker) as well as electromechanical devices (e.g. magnetic cards, mechanical clocks, precision mechanics, hard disks).

• With regard to the effect of powerful magnetic fields on persons, the applicable national stipulations and regulations must be complied with such as BGV B11 §14 „electromagnetic fields“
  (occupational health and safety – electromagnetic fields) in the Federal Republic of Germany.

• To avoid interference/disruption, always keep the implant or device a safe distance of at least 30 cm away from the magnet.

Safety instructions
Using artificial, optical emission (OStrV)

DIN EN 62471

Risk Group 2
CAUTION: Possibility of harmful optical radiation. Hazard for retina from blue light between 400 and 780 nm. Do not look into the lamp for longer periods during operation. Can be harmful to eyesight.

7 in 1 multifunction bracket

Operating Instructions

• To turn on lamp, short press power button .

• When lamp is on, short press power button to switch from flood to spot mode, short press again to turn off lamp.

• To activate steeples dimming when lamp is on, press and hold power button to adjust intensity (10%-100%), the light source will flash once when either maximum or lowest intensity has been reached. If steeples dimming was interrupted before maximum or minimum intensity is reached, activating steeples dimming again will dim in the lamp in the opposite intensity level.

• To activate SOS function, when lamp is off, press and hold power button for 5 seconds.
  To activate HBS (human body sensor), when lamp is on, press HBS button . The HBS symbol will appear on the LCD display WIFI . HBS will turn off lamp if there is no movement beyond 3-5 meters around the lamp for 15-30 seconds and will turn on lamp is any movement detected within 3-5 meters. Press the HBS symbol again to turn off HBS function. Turning off the lamp via power button while the HBS is on will also turn off the HBS.

• The OSS (Object Sensor System) will turn off light output whenever there is any obstruction in front of the sensor, LCD display will remain lit so user knows light output was turned off due to OSS. If the obstruction is removed, the light output will turn back on.

Diffuser

• Turn per below direction to lock in either Spot light or Floodlight position
• Transforms a front facing floodlight to an all surrounding area light Wide floodlight angle of illumination (without diffuser)

All surrounding area light with diffuser on

• To install the diffuser:
  Insert and press down this part of diffuser into corresponding slot

• To remove diffuser:

  1. rotate the diffuser into this position
  2. then pull out the diffuser in direction shown

Technical Data

(Subject to technical changes without notice. 21W31)

Luminosity spot light / flood light| 50 – 500 lm / 150 – 1500 lm
Duration spot light / flood light| 2 – 20 hours / 1.5 – 12 hours
LED chip| COB LED
Protection class (lamp)| IP 65
Power supply| Li-ion 3.7 V / 5.2 Ah
Charging-Port| USB-C
Charging time| 3 – 4 hours
Operating conditions| 0° … 40° C
Storage conditions| -10° … 60° C
Dimensions| 133 x 70 x 63 mm
Overall weight| 650 g (including battery pack)

EU directives and disposal
This device complies with all necessary standards for the free movement  of goods within the EU.
This product is an electric device and must be collected separately for disposal according to the European Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at: www.4k5tools.com

For lithium-based primary and secondary batteries as well as other high performance batteries Only dispose of completely discharged batteries. If a battery is not completely discharged, precautions must be taken to prevent short circuiting its terminals, e.g. isolation of the terminals.

Notice about transporting products containing lithium batteries The battery has been built and tested according to the current UN manual 38.3. Effective protection against over-pressure, short-circuit, forceful breakage and reverse current are provided. Refer to the operating instructions for battery data. If no specific safety information is provided this means the quantity of lithium and energy level are below the currently applicable limits. In this case the battery, neither on its own nor installed in the device, is subject to international hazardous materials regulations. The transport of multiple batteries could be relevant for hazardous materials regulations, please observe the special conditions (e.g. packaging).

Notice about disposal Electrical devices, mechanical devices, batteries, accessories and packaging should be recycled in an environmentally appropriate process to recover valuable raw materials. Please contact your municipal authority for information on corresponding disposal facilities and comply with the disposal and safety information at the collection sites.

For EU countries Do not put electric devices into household garbage. The European directive for scrap electric and electronic devices dictates they must be collected separately and sent to an environmentally appropriate recycling facility. Electric devices are marked with an icon of a crossed-out garbage can. Batteries must be removed from the device before its disposal, the batteries must be disposed of separately.

SERVICE
Umarex GmbH & Co. KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Germany Tel.: +49 2932 638-300, Fax: +49 2932 638-333 info@laserliner.com

Umarex GmbH & Co. KG Donnerfeld 2
59757 Arnsberg, Germany Tel.: +49 2932 638-300 Fax: +49 2932 638-333 www.4k5tools.com

References

• Werkzeug für Heim- und Handwerker: 4K5 BETTER EQUIPMENT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>