jump XJ 100 Amplified Bluetooth Speaker User Guide
- June 12, 2024
- jump
Table of Contents
jump XJ 100 Amplified Bluetooth Speaker
Product Information
The XJ 100 is an amplified Bluetooth speaker that provides high-quality sound. It is designed for wireless audio playback and has additional features such as TWS (True Wireless Stereo) functionality and LED effects. The speaker is powered by a rechargeable battery and can be connected to various devices via Bluetooth or AUX input.
Technical Specifications
- Battery Type: Rechargeable
- Power Supply:
- Audio Power:
- Frequency Response:
- Signal-to-Noise Ratio:
- Distortion:
- Impedance:
- Max Bluetooth Transmission Power:
- Bluetooth Transmission Frequency:
- Protection Index:
- Dimensions:
- Weight:
Product Usage Instructions
Cleaning and Maintenance
For cleaning, it is recommended to use a soft, slightly damp cloth. Avoid
using solvents or abrasive substances.
Important Information
TREVI constantly pursues research and development, so the product may have
features different from those described.
Proper Use of Rechargeable Battery
Follow the instructions below for correct use of the rechargeable battery.
Charging
The speaker must be turned off during charging. Use the provided USB/USB
Type-C cable to connect the USB Type-C end to the charging port (1) and the
other end to a power source.
Power On and Power Off
To turn on the device, press and hold the (1) button for 2 seconds. To turn
off the device, press and hold the (1) button for 2 seconds.
Volume Adjustment
To increase the volume, press the (3) button once. To decrease the volume,
press the (4) button once.
Bluetooth Operation
To pair the speaker with a Bluetooth device, place it near the device and
follow the instructions of the external device to search for the speaker.
Disconnecting and Reconnecting Bluetooth
To disconnect from a previously paired device and connect to another
device, press and hold the (7) button for 2 seconds.
Playing Music and Answering Calls
To play or pause music, press the (1) button once. To skip to the next
track, press and hold the (3) button for a few seconds. To go back to the
previous track, press and hold the (4) button for a few seconds. To answer a
call, press the (5) button once. To end a call, press the (5) button again. To
reject an incoming call, press and hold the (7) button for 2 seconds.
TWS Function (True Wireless Stereo)
To activate TWS function, search for the Bluetooth name “XJ 100” on another
compatible speaker and enter the PIN 0000 if required.
AUX IN Operation
For AUX input operation, connect an external audio source to the speaker
using an appropriate cable.
LED Effects
The speaker has LED indicators that provide visual effects during
operation.
USAGE NOTES
Do not use power supply with a voltage higher than 5V , cause damage to the player.
-
Listen at high volume for long periods of time, may damage your hearing.
-
Avoid using it in the following cases:
Near strong heat sources, such as central heating plants or stoves.
In very humid places such as bathrooms, swimming pools, etc.
In very dusty places.
In places subject to strong vibrations.
Position the appliance in such a way that there is always enough room for free air circulation (at least 5cm). -
Do not block the air inlets.
-
If any liquid enters the appliance, unplug it immediately from the socket and take it to the nearest TREVI authorised service centre.
-
Before switching on the appliance, always check that the power cable and the connection cable are properly installed.
-
No naked flame sources, such as lighted candles, should be placed on this.
-
The apparatus shall not be exposed to dripping or splashing water and no object filled with water, such as vases, should be placed on the unit.
-
Keep this manual for future reference.
CARE AND MAINTENANCE
For cleaning it is recommended to use a soft, slightly damp cloth. Avoid solvents or abrasive substances.
IMPORTANT
The construction of this device guarantees long flawless operation. However,
if come some problem, you should consult your nearest authorized service
center. TREVI pursues a policy of continuous research and development.
Therefore, the products may show different characteristics from those
described.
WARNING FOR A CORRECT USE OF RECHARGEABLE BATTERY
- Recharge the battery in an ambient temperature between 5°C and 35°C.
- Don’t recharge more than the suitable period to prevent the risk of overheating and burst.
- Recharging the battery over the suitable period or an extended period of inactivity may reduce battery duration.
- Rechargeable battery is liable to wear and tear and its performance will reduce gradually.
- To extend the duration of the battery use it when is completely charged up to the complete discharging, then recharge it fully before use it again. Recharge a battery not completely consumed, will result a reduced duration. In this case, repeat the full charging/discharging cycle many times.
- Avoid recharge the battery for the whole night.
CONTROLS
- button :
- long press about 2 seconds o turn ON/ turn OFF the device.
- Single click Pause/ Play music.
- Power LED.
- button :
- Single click Volume +;
- long press Enter into the next song.
- button :
- Single click Volume -;
- Long press Back to previous song.
- button :
- TWS (True Wireless Stereo).
- Working state LED.
- button:
- USingle click to switch the music playing mode (BT, AUX-IN).
CHARGING
The speaker must be recharged when switched Off.
- Insert one end of the power cord into the Type-C (9) port of the device and the other end USB into the standard 5V 2A external DC adaptor (not included);
- The LED indicators (2) will blinking, indicating the charging status; 4 orange lights will be lit when your unit is fully charged. This device is inbuilt with charge protection circuit, which can be connected to changer for long time; it will take about 3-4h to charge the battery fully; the endurance of the battery depends on low or high volume.
Note : When the battery is low, the device will emit a warning sound for a few times before automatically turning off
POWER ON/ OFF
- Press and hold the button (1) for 2 seconds to power On the speaker. The working state Led (6) will flash.
- Press and hold the button (1) for 2 seconds to power Off the speaker. The working state Led (6) will turn off.
VOLUME ADJUSTMENT
- Press key (4) several times to decrease the volume, or key (3) to increase the volume
BLUETOOTH
BLUETOOTH CONNECTION METHODS
- Power On the speaker, the working state Led (6) will flash in Green;
- Enable Bluetooth on your mobile device (mobile phone, PC, Tablet) to search Bluetooth device;
- Search for Bluetooth devices and select “XJ 100”; the device will automatically pair and connect. Successful connection will deliver reminding tone and the working state Led (6) will turn to Green (In general case, no password is needed; for special mode, output password, input “0000”);
- The successfully paired device can be automatically connected for the next switch-on.
Note:
- The speaker will power off automatically if no connection withing 20 minutes
- Press and hold button (7) 2 seconds, the speaker will disconnect with the Bluetooth device, other Bluetooth device will connect with the speaker.
COMMANDS AVAILABLE IN BLUETOOTH MODE
- Press and hold the key (3) for a few seconds to go to the next song, keep the key (4) pressed for a few seconds to go to the previous song;
- Press the button (1) to pause, press it again to resume playback
HANDS-FREE MODE FOR CALLS
If connected to a telephone, you will hear a beep when a call is received.
- Press the button (7) once to answer an incoming call, press it again to end the call;
- Press and hold the button (7) for 2 seconds to reject the call
TWS PAIRING METHODS
You can purchase two XJ 100 speakers so you can connect them together and enjoy the True Wireless Stereo sound.
- Turn Off the Bluetooth on your phone or device and make sure speakers are not connected with any devices (also remove the Aux-in cable);
- Choose one of them as the master unit at will. First click the (5) button on the master, then two speakers will automatically connect to each other;
- Now turn On Bluetooth on your phone or device, and start to search for Bluetooth device, the “XJ 100” will be found, please connect it;
- Once TWS connected, it will re-connect automatically when next power On, otherwise you can clear TWS by long pressing (5) button.
AUX IN
- Use the 3.5mm audio cable in the accessories to connect the audio source equipment and speaker;
- Turn On the audio source device and play music;
- Press the (1) button to play or mute the speaker
LIGHT THEME
Double-click the (1) button when playing music, the light theme can be
changed. There are three light themes: Gradient changing light – Breathing
light – No light.
TECHNICAL SPECIFICATIONS
- Rechargeable Battery: Internal Li-ion 7.4V, 2500mAh
- Power supply: 5V 2A
- Power audio: 40W
- Frequency response: 80Hz – 20KHz
- S/N ratio: >75 db
- Distortion factor: <1%
- Impedance: 4Ω
- Max Bluetooth power transmission: 0,8mW
- Bluetooth transmission frequency: 2,4GHz
- Index protection: IP67
- Dimensions: 220 x 88 x 88mm
- Weight: 680gr
INFORMATION ON THE REMOVAL AND DISPOSAL OF BATTERIES
Warning : the operation of removal and disposal is reserved to technical personnel! Whatever type of battery used up, it should never be placed in household waste, fire or water. Each type of used battery must be recycled or disposed of at appropriate dedicated collection points. To remove the battery:
- Remove the cover grille above the speakers by levering the part near the keyboard;
- Remove the side membranes;
- Unscrew all the screws and separate the front part of the cabinet from the rear one;
- Locate the battery, remove it, and replace it with one of the same characteristics and capacity
PRECAUTIONS FOR CORRECT DISPOSAL OF THE PRODUCT
The symbol shown on the equipment indicates that waste must be disposed of in “separate collection” and so the product must not be disposed of together with urban waste. The user must take the product to special “separate waste collection centers” provided by the local government, or deliver it to the retailer against the purchase of a new product. Separate collection of waste and subsequent treatment, recycling, and disposal operations promotes the production of equipment with recycled materials and limits negative effects on the environment and on health caused by improper handling of waste. Illegal disposal of the product leads to the enforcement of administrative penalties
Simplified EU Declaration Of Conformity
Hereby TREVI S.p.a declares that the appliance model XJ 100 is in compliance
with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity is available at the
following internet address:
https://www.trevi.it/dms/zidi/TREVI/DOCXJ100.pdf
If you will not find your language on the instruction manual, please go on our website www.trevi.it to find it
Trevi S.p.A. – Strada Consolare Rimini-San Marino, 62 47924 Rimini (RN) Italy www.trevi.it – email: info@trevi.it
**** Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>