X JUMP XJ 150 60W Wireless Amplified Speaker User Guide
- August 5, 2024
- x jump
Table of Contents
- X JUMP XJ 150 60W Wireless Amplified Speaker
- Product Usage Instructions
- USAGE NOTES
- CARE AND MAINTENANCE
- WARNING FOR A CORRECT USE OF RECHARGEABLE BATTERY
- CONTROLS
- WIRELESS
- TECHNICAL SPECIFICATIONS
- INFORMATION ON THE REMOVAL AND DISPOSAL OF BATTERIES
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
X JUMP XJ 150 60W Wireless Amplified Speaker
Product Specifications:
- Model: XJ 150
- Type: Amplified Wireless Speaker
- Manufacturer: TREVI
Product Usage Instructions
Cleaning and Maintenance:
For cleaning, use a soft, slightly damp cloth. Avoid solvents or abrasive
substances.
Battery Usage:
Ensure to recharge the battery to 80% before reusing it. Avoid keeping the
battery under charge overnight.
Control Description:
- TWS Button (2): Press once to activate/deactivate TWS connection.
- Play/Pause Button (3): Press once for Play/Pause, long-press to connect/disconnect wireless link.
- Power Button (5): Long-press for 3 seconds to turn on/off the device.
- Volume Up Button (6): Press once to increase volume, hold for a few seconds to go to the next track.
- Volume Down Button (7): Press once to decrease volume, hold for a few seconds to go to the previous track.
Charging:
The speaker must be charged when turned off. Use the provided USB/USB
Type-C cable to connect the USB Type-C end to the charging port.
Power On/Off:
To turn on the speaker, long-press button (5) for 3 seconds. To turn off
the speaker, long-press button (5) for 3 seconds.
Wireless Operation:
- The speaker should be off during charging.
- Use the provided USB/USB Type-C cable to connect the USB Type-C end to the charging port.
- Follow your external device’s instructions to start searching for the speaker.
- Select and pair the speaker named XJ 150 and enter PIN 0000 if required.
FAQ – Frequently Asked Questions
-
Q: How do I reset the device?
To reset the device, press and hold button (3) to disconnect from a previously paired device and pair with another device. -
Q: What should I do if wireless pairing fails?
If wireless pairing with external devices fails, remove another device from the connections list, restart the wireless speaker, and search for the signal again. -
Q: How do I answer calls using the speaker?
To answer a call, press button (3) once; press again to end the call. Press and hold button (3) for 2 seconds to reject an incoming call. Press button (3) twice to redial the last number.
For additional information and updates of this product see: www.trevi.it
USAGE NOTES
Do not use power supply with a voltage higher than 5V , cause damage to the player.
- Listen at high volume for long periods of time, may damage your hearing.
- Avoid using it in the following cases:
- Near strong heat sources, such as central heating plants or stoves.
- In very humid places such as bathrooms, swimming pools, etc.
- In very dusty places.
- In places subject to strong vibrations.
- Position the appliance in such a way that there is always enough room for free air circulation (at least 5cm).
- Do not block the air inlets.
- If any liquid enters the appliance, unplug it immediately from the socket and take it to the nearest TREVI authorised service centre.
- Before switching on the appliance, always check that the power cable and the connection cable are properly installed.
- No naked flame sources, such as lighted candles, should be placed on this.
- The apparatus shall not be exposed to dripping or splashing water and no object filled with water, such as vases, should be placed on the unit.
- Keep this manual for future reference.
CARE AND MAINTENANCE
For cleaning it is recommended to use a soft, slightly damp cloth. Avoid solvents or abrasive substances.
IMPORTANT
The construction of this device guarantees long flawless operation. However,
if come some problem, you should consult your nearest authorized service
center.
TREVI pursues a policy of continuous research and development. Therefore, the
products may show different characteristics from those described.
WARNING FOR A CORRECT USE OF RECHARGEABLE BATTERY
- Recharge the battery in an ambient temperature between 5°C and 35°C.
- Don’t recharge more than the suitable period to prevent the risk of overheating and burst.
- Recharging the battery over the suitable period or an extended period of inactivity may reduce battery duration.
- Rechargeable battery is liable to wear and tear and its performance will reduce gradually.
- To extend the duration of the battery use it when is completely charged up to the complete discharging, then recharge it fully before use it again. Recharge a battery not completely consumed, will result a reduced duration. In this case, repeat the full charging/discharging cycle many times.
- Avoid recharge the battery for the whole night.
CONTROLS
-
button:
- Single click to switch the light mode.
- Long press to turn ON/OFF the light.
-
TWS button:
- Single click enter into/ exit TWS connection.
-
button:
-
Single click pause/ play music.
-
Long press to Exit/ Re-connect Wireless connection.
When the device connected with the phone: -
Double click to call back.
-
Single click answer/ end incoming call.
-
Long press about 2 seconds to reject the incoming call.
-
-
M button:
- Single click to switch the music playing mode.
-
button:
- Long press to turn ON/ turn OFF the device about 3 seconds/time.
-
button:
- Single click Volume +.
- Long press Enter into next song.
-
button:
- Single click Volume -.
- Long press Back to previous song.
-
TF slot.
-
Type- C socket.
-
AUX jack standard 3.5mm.
-
USB socket.
CHARGING
The speaker must be recharged when switched Off.
- Using the supplied USB/USB Type-C cable, connect the side with the USB Type-C socket to the socket (9) of the speaker and the other end to the USB port of a PC or USB charger (5V 2A not included);
- The LED indicator near the socket (9) will light up red; when charging is complete, the LED will go out.
Note: When the battery is low, the device will emit a warning sound for a few times before automatically turning off.
POWER ON/ OFF
To switch on the speaker, press and hold the button (5) for 3 seconds.
To turn off the speaker, press and hold the button (5) for 3 seconds.
Note: If there is no working state, it will automatically shut down after
15 minutes.
VOLUME ADJUSTMENT
Press button – (7) several times to decrease the volume, or button + (6) to
increase the volume.
WIRELESS
WIRELESS CONNECTION
- Switch On the speaker, white Led indicator on button (5) will blinking about 0.5 seconds/ time under Wireless searching status;
- Activate the Wireless function on your mobile device (mobile phone, PC, Tablet) to search device name “XJ 150”;
- With manual click, the device will automatically pair and connect: successful connection will deliver reminding tone. (In general case, no password is needed; for special mode, output password, input “0000”), The white light is always On when Wireless connected successfully with the device;
- The successfully paired device can be automatically connected for the next switch-on.
The white light flashes slowly about 1 second/time under playing status.
Note:
- Whithin 10s after entering Wireless mode, the unit will automatically seek for the device and pair for connection; after 10s, it needs to be connected manually.
- Press and hold button (3) for a few seconds to deactivate the connection with a previously paired device and to re-pair with another device.
COMANDS AVAILABLE IN WIRELESS MODE
- Press and hold the key + (6) for a few seconds to skip to the next track, press and hold button – (7) for a few seconds to skip to the previous track;
- Press the button (3) to pause, press it again to resume playback.
HANDS-FREE MODE FOR CALLS
When connected to a telephone, an audible warning will be heard when a call
is received:
- Press the button (3) once to answer a call and activate the hands-free function, press it again to end the call;
- Press and hold button (3) about 2 second to reject the incoming call.
- Press the button (3) twice to redial the last number.
TWS PAIRING METHODS
Two device of this model could connect together by this button (2) to boom up
the music.
- Prepare two device which is disconnected with any other Wireless device;
- Single clik this button (2) of them, you will hear short “di” sound after you single click;
- After a while, you will hear a long sound “di ”, it means this two device connected sucessfully;
- Under connection, on your mobile device, search and select “XJ 150” device.
Note: Using the TWS function must get the two device paired at first then continuing the wireless function.
RADIO FUNCTION
ATTENZIONE: When using the radio function, you need to plug in the type-C
cable into the socket (7), as the radio antenna. The radio function can be
used normally.
- Switch On the speaker;
- Select Radio function using button M (4);
- To carry out a scan with saving of found radio stations, press and hold the (3) button for a few seconds and wait for it to scan the entire FM band. Found radio stations will be saved automatically;
- To select a saved radio station, press and hold button – (7) or button + (6) for a few seconds.
MICRO SD CARD/USB OPERATION
- Switch on the speaker;
- Insert a micro SD card into the slot (8) with the electrical contacts facing down, or insert a USB memory into the socket (11);
- Playback will start automatically;
- Press and hold the button + (6) for a few seconds to skip to the next track, press and hold – (7) button for a few seconds to skip to the previous track;
- Press button (3) to pause, press it again to resume playback.
AUX IN
- Connect the Jack/Jack audio cable to the AUX jack (10) and the other end to the external device. The device will automatically go to AUX mode;
- Start from the external device playback.
LIGHT THEME
During normal music playback, press the button (1) several times to change the
light effect.
Long press button (1) to turn ON/OFF the light.
TECHNICAL SPECIFICATIONS
- Rechargeable Battery: ………………………………………. Internal Lithium 7.4V, 3000mAh
- Power supply: ………………………………………. 5V 2A
- Power audio: ………………………………………. 60W Max
- Frequency response: ………………………………………. 80Hz – 15KHz
- S/N ratio: ………………………………………. 73,8 db
- Distortion factor: ………………………………………. 5%
- Impedance: ………………………………………. 16Ω
- Max wireless power transmission:………………………… 0,8mW
- Wireless transmission frequency:…………………………. 2,4GHz
- Index protection: ………………………………………. IPX5
- Dimensions: ………………………………………. 339 x 148 x 187mm
- Weight: ………………………………………. 2009gr
INFORMATION ON THE REMOVAL AND DISPOSAL OF BATTERIES
Warning: the operation of removal and disposal is reserved to technical personnel!Whatever type of battery used up, it should never be placed in household waste, fire or water. Each type of used battery must be recycled or disposed of at an appropriate dedicated collection points.
To remove the battery:
- Remove the rubber covers on the sides of the unit where the plastic membranes are located;
- Pry between the two parts that make up the handle and remove the screws that secure it to the cabinet;
- Remove the screws from the plastic parts on the sides where the membranes are located;
- Remove the fabric grille by prying it off at the bottom where it joins;
- Remove the rubber foot under the unit;
- Unscrew all screws holding the front cabinet to the rear cabinet;
- Open the cabinet and locate the battery;
- Remove the battery and replace it with one of equal characteristics and capacity.
PRECAUTIONS FOR CORRECT DISPOSAL OF THE PRODUCT
The symbol shown on the equipment indicates that waste must be disposed of in
“separate collection” and so the product must not be disposed of together with
urban waste. The user must take the product to special “separate waste
collection centres” provided by local government, or deliver it to the
retailer against the purchase of a new product. Separate collection of waste
and subsequent treatment, recycling and disposal operations promotes the
production of equipment with recycled materials and limits negative effects on
the environment and on health caused by improper handling of waste. Illegal
disposal of the product leads to the enforcement of administrative penalties.
Simplified EU Declaration Of Conformity
Hereby TREVI S.p.a declares that the appliance model XJ 150 is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.trevi.it/dms/zidi/TREVI/DOCXJ150.pdf
If you will not find your language on the instruction manual, please go on our
website www.trevi.it to find it Trevi S.p.A. – Strada
Consolare Rimini-San Marino, 62 47924 Rimini (RN) Italy
www.trevi.it – email:
info@trevi.it
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>