PYLE PGTAMPL117 Electronic Guitar Amplifier User Manual
- June 4, 2024
- Pyle
Table of Contents
PYLE PGTAMPL117 Electronic Guitar Amplifier
Portable Electronic Guitar Amplifier
5” High-Definition Speaker with Volume,Bass and Treble Controls
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
Precautions
To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.
- Take care not to drop the unit, and do not subject it to shock or excessive pressure.
- Place the amplifier carefully in a stable position. The sound from the amplifier will vary depending on how and where it is set up.
- Do not use or store the amplifier in locations where it is subject to direct sunlight or in environments that experience extreme temperatures and humidity levels.
- Reduce the volume to “0″ or switch off the power supply when connecting the guitar shielded cable and the effects or other cables required for external connection. Note that the noise generated when plugs are inserted and removed may cause severe damage to the equipment.
- To avoid the danger of fire, do not place containers of liquid on the amp.
- As long as the amplifier is connected to an electrical outlet, it is not completely insulated from the power supply even if the power switch is turned off. When you are not using it, leave the power turned off. If you will not be using the amplifier for an extended period, leave the power cable disconnected.
IMPORTANT SAFETY INSTRUCTIONS AND WARNING
-
Read these instructions
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean only with a dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not defeat the safety purpose of the polarized or grounding type plug.
A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. -
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use attachments/accessories specified by the manufacturer.
-
Use only with the cart, stand, tripod, bracket, or table (I specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Minimum distances of 20cm around the apparatus for sufficient ventilations.
-
Do not install this equipment in a confined space such as a book case or similar unit. The ventilation should not be impeded by covering the ventilation openings with items such as news paper, tablecloths, curtains etc.
-
WARNING: The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable.
-
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
-
Protective earthing terminal. The apparatus should be connected to a mains socket outlet with a protective earthing connection.
WARNINGS
- “The Lightning Flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product enclosure that may be of sufficient magnitude to constitute a risk of shock to persons”.
- “The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product”.
Overview
-
INPUT: 1/4” phone jack input.
-
DIST. sw: Engaging this switch will activate the onboard distortion circuit for Guitar input signal.
-
DISTORTION – GAIN: This adjusts the gain (level of overdrive distortion.) when using the distortion channel.
-
BASS: This controls the low register.
-
TREBLE: This controls the high register.
-
VOLUME: This controls the output level.
-
POWER: This is the ON/OFF switch for the power supply.
-
The LED lights when the power supply is turned on.
Warning: Before you turn on the power of the amp, make sure that volume control is set to “0”. If you turn on the power when the volume controls are already raised, a sudden loud noise may be produced, possibly damaging your bearing. Please use caution. -
DC IN JACK: This is the jack to which the AC adaptor is connected.
-
VOLUME (HEAD PHONES): This controls the output level.
-
OUTPUT (HEAD PHONES): This is a 3.5mm stereo pair of headphones. The sound is not reproduced through the built-in speaker when headphones are in use.
WARNING
This phones output produces a large volume of sound. Ensure that the volume
has been turned down before beginning to play using the headphones, and then
slowly increase the volume until it has reached the desired level. Note that
the noise and distorted sound signals produced when inserting or removing the
headphone plug at heigh volume levels will result in damage to the headphones
and to the user’s hearing.
TROUBLESHOOTING
- The power supply cannot be switched on.
- Check that the power cable has been connected correctly.
- Try plugging it into a different socket and see if the same problem occurs.
- The power supply can be switched on, but no sound is produced.
- Check that the guitar has been connected correctly.
- Remove the effects between the guitar and the amplifier and check to see if no sound is produced.
- Replace the shielded cable and check to see if no sound is produced.
- Check to see if the volume on the guitar is set to ’O’.
- Use a different guitar and see if no sound is produced.
- Check to see if the volume on the amplifier is set to ’O’.
- Check to see if the headphones are connected.
- Noise is heard.
- Check to see if anything in the immediate vicinity is resonating or banging against the amplifier to produce the noise.
- Check to see if the plug cover on the shielded cable is loose.
- Check that the string action (distance between strings and frets) is correctly adjusted (not too low).
- Use another guitar, effects and cable to see if the same noise is produced.
- No sound is produced in the headphones.
- Check that the headphone jack is connected correctly.
- Connect another set of headphones and see if sound is produced.
In the case of defects
This product has passed exhaustive inspections before being shipped from the factory, ensure that the above procedures are carried out when a problem is thought to exist. Contact your dealer in the unlikely event that an abnormality occurs during use. Also, ensure that the symptoms of the problem are explained in detail when requesting repair in order to facilitate swift handling.
Features
- Heavy Duty Wood Construction
- 5” High-Definition Speaker
- Volume, Bass, and Treble Controls
- 3. 55mm Headphone Jack
- Power On/Off Switch w/ LED Indicator
- Specially Designed for Enhanced High-Frequency Response
- Functions : Input, Drive Switch, Volume, Treble, Bass, Headphone Output
- Portable and Lightweight for Easy Transport
- Includes Headphone Output for Silent Practice
Technical Specs
- Power Supply : 10 Watts
- Power Output : AC110V/220V Switchable
- Construction Materials : Lightweight Plywood, Coated by High-Quality Leather
- Product Dimensions (L x W x H): 9.25” x 5.07” x 8.46” –inches
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>