STAIRVILLE GP-10 BAT Bk Gobo Projector User Guide
- June 4, 2024
- STAIRVILLE
Table of Contents
GP-10 BAT Bk Gobo Projector
User Guide
Quick start guide
This quick start guide contains important information on the safe operation of
the product. Read and follow the safety advice and instructions given. Retain
the quick start guide or future reference. If you pass the product on to
others please include this quick start guide.
Safety instructions
Intended use
This device is intended for the projection of exchangeable gobos. The device
is designed for professional use and is not suitable for use in households.
Any other use or use under their operating conditions is considered to be
improper and may result in personal injury or property damage. No liability
will be assumed for damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are
not within reach of babies and young children. Choking hazard! Ensure that
children do not detach any small parts from the product. They could swallow
the pieces and choke!
Magnetic fields
In the mounting bracket of the device, a strong magnet is installed, which can
affect the operation of electromagnetically influenceable objects or devices.
Do not use the gobo projector in electromagnetic-sensitive environments
(pacemakers, credit cards, etc.).
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that
apply in your country. Always secure the device with a secondary safety
attachment, such as a safety cable or a safety chain.
Eye damage caused by high light intensity
Never looks directly into the light source.
External power supply
The device is powered by an external power supply. Before connecting the
external power supply, ensure that the input voltage (AC outlet) matches the
voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device
and possibly the user. Unplug the external power supply before electrical
storms occur and when the device is unused for long periods of time to reduce
the risk of electric shock or fire.
Operating life of the LEDs
Extend the operating life of the device by regular breaks and by avoiding
frequent switching on and off. The device is not suitable for continuous
operation.
For technological reasons, the light output of LEDs decreases over their
lifetime. This effect increases with a higher operating temperature. You can
extend the service life of the illuminants by providing adequate ventilation
and operating the LEDs with the lowest possible brightness.
Possible damage to lithium-ion batteries through incorrect storage
By deep discharge, lithium-ion batteries can be permanently damaged or lose
some of their capacity. Before long breaks, charge the batteries to around 50
% of their capacity and then switch off the device. Store the device at room
temperature or cooler in an environment as dry as possible. If the batteries
are stored for a longer period, recharge them o 50 % every three months. Fully
charge the batteries only shortly before use at room temperature.
Incorrect handling of lithium batteries can result in injury
- In the event of a short circuit, overheating or mechanical damage, lithium batteries can cause severe injuries.
- When handled correctly and appropriately lithium batteries pose no risk.
- Store lithium batteries in a cool, dry place, ideally in the original packaging.
- Store lithium batteries away from heat sources (e.g. radiators or sunlight). Lithium batteries are hermetically sealed. Never attempt to open a lithium battery.
- If the battery housing is damaged small amounts of the electrolyte may leak out. If this should happen, seal the lithium battery in airtight packaging and wipe up the traces of electrolyte using absorbent paper towels. You must wear protective rubber gloves when doing so. Clean your hands and the affected surface thoroughly with cold water.
- Never attempt to recharge non-rechargeable lithium batteries. When charging lithium batteries you must use a suitable charging device intended for the purpose.
- Before disposing of the device remove the lithium batteries. Protect used lithium batteries against potential short circuits, e.g. by covering the poles with adhesive tape.
- Only use powder extinguishers or other suitable extinguishing agents to extinguish a burning lithium battery.
Where to use the product
Never use the product
- outdoors
- in direct sunlight
- in conditions of extreme temperature or humidity
- in extremely dusty or dirty areas
- at locations where the unit can become wet
General handling
- To prevent damage, never use force when handling the product.
- Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents.
Features
- Powerful projector for logos and pictures
- 10-W LED in cold white
- Universally applicable thanks to the integrated battery and the multifunctional bracket
- Battery life with full power: 6 hours
- Multifunctional holder: strong magnetic base, floor stand, and M10 mount
- Easy regulation of brightness using the supplied infrared remote control
- Adjusting the size and sharpness of the projection directly on the device
- 10 gobos included in the scope of delivery
Connections and operating elements
- Infrared sensor for the signals from the supplied remote control
- Rotary control for adjusting the sharpness of the projection (focus)
- Rotary control for adjusting the size of the projection (zoom)
- Gobo holder
- Locking screws for the mounting bracket
- Mounting bracket
- The mounting clip, detachable
- Safety cable eyelet
- Main switch. Turns the device on and off.
- Magnetic base
- Socket for connecting the supplied power adapter
Charging the battery
The device can be operated wirelessly with the integrated lithium-ion battery.
- Turn the device off with the main switch.
- Connect the external power adapter to the socket on the rear side. The indicator light of the power adapter lights up red during the charging process. When charging is completed, the indicator light of the power adapter lights up green.
The integrated lithium-ion battery can also be charged during operation.
Battery life
Max. operating time | Charging time |
---|---|
100 % power | Up to 6 hours |
75 % power | Up to 8 hours |
50 % power | Up to 13 hours |
25 % power | Up to 16 hours |
Infrared remote control
1. [ON/OFF] 2. [+] 3. [–] 4. [Blackout] 5. [Fade] 6. [Strobe] 7.[20%]…
[100%]| Turns the device on or off
Increases the brightness of the LEDs in 5 steps
Decreases the brightness of the LEDs in 5 steps
Switches the LEDs on or off
Enables or disables the fade effect
Enables or disables the strobe effect
Buttons for directly selecting the brightness of the LEDs
---|---
Mounting
When in use, the device must always be attached to a solid surface or an
approved truss. Always work from a stable platform whenever installing, moving
or servicing the device. n doing so, the area underneath the unit must be
cordoned off.
- You can attach the device to metal surfaces with a magnetic base. To do this, remove the mounting clip.
- Alternatively, attach the M10 mount of the mounting clip to a stand or a suitable truss.
Always use a safety cable for mounting the device over your head!
Exchanging the gobos
10 gobos are included in the scope of delivery.
- Turn the device off with the main switch and wait until it has cooled down completely.
- Unscrew the knob of the gobo holder and pull out the gobo holder.
- Remove the lock ring from the gobo holder. Now you can remove the gobo and replace it with another. Place the gobo so that the subject appears mirror-inverted when you look at the optics from the front.
- Put the lock ring back on the gobo holder.
- Replace the gobo holder and screw the knob of the gobo holder firmly.
Technical specifications
Light source | 10-W LED in cold white |
---|---|
Light source properties | Color temperature 10 000 Kolor rendering index CRI 70 |
Optical properties | Beam angle 16°…31° |
Gobo | Diameter 25.8 mm |
Control | Infrared remote control |
Input connections | Socket for connecting the supplied power adapter |
Power consumption | 10 W |
Power supply | External power adapter, 100 – 240 V ~ 50/60 Hz |
Operating voltage | 8.4 V –1 A |
Battery | Battery type Lithium-ion Voltage 8.4 V Capacity 5000 mAh Charging |
time in the device 4 h
Battery remote control| Lithium-ion button cell CR2025
Degree of protection| IP20
Mounting options| Hanging, standing
Colour| Black (item no. 525570), white (item no. 525571)
Dimensions (W × H × D| 110 mm × 170 mm × 167 mm
Weight| 1 kg
Ambient conditions| Temperature range 0 °C…40 °C
Relative humidity 20 %…80% (non-condensing)
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are properly disposed of. Do not just dispose of these
materials with your normal household waste, but make sure that they are
collected for recycling. Please follow the notes and markings on the
packaging.
Batteries must not be disposed of as domestic waste or thrown into the fire.
Dispose of batteries according to national or local regulations regarding
hazardous waste. Dispose of empty batteries at appropriate collection sites.
Dispose of lithium batteries only in discharged condition. Remove replaceable
lithium batteries from the device before disposal. Protect used lithium
batteries from short circuits, for example by covering the poles with adhesive
tape. Permanently installed lithium batteries must be disposed of together
with the device. Please inquire about a suitable acceptance point.
This product is subject to the European Waste Electrical and Electronic
Equipment Directive (WEEE) in its currently valid version. Do not dispose of
your old device with your normal household waste. Dispose of this product
through an approved waste disposal firm or through your local waste facility.
Comply with the rules and regulations that apply in your country. If in doubt,
consult your local waste disposal facility.
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
www.thomann.de
info@thomann.de
DocID: 525570_525571_30.11.2021
Documents / Resources
|
STAIRVILLE GP-10 BAT Bk Gobo
Projector
[pdf] User Guide
GP-10 BAT Bk, GP-10 BAT Wh, Gobo Projector, Projector, GP-10 BAT Bk
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>