STAIRVILLE 446042 LED Power-Flood Pro 200W 6K High Performance LED Floodlights User Manual
- June 4, 2024
- STAIRVILLE
Table of Contents
- STAIRVILLE 446042 LED Power-Flood Pro 200W 6K High Performance LED
- ABOUT COMPANY
- General information
- Safety instructions
- Features
- Installation and starting up
- Technical specifications
- Cleaning
- Protecting the environment
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
STAIRVILLE 446042 LED Power-Flood Pro 200W 6K High Performance LED
Floodlights
ABOUT COMPANY
- Thomann GmbH Hans-Thomann-Straße 1
- 96138 Burgebrach
- Germany
- Telephone: +49 (0) 9546 9223-0
- Internet: www.thomann.de
- 12.05.2022,
- ID: 446041, 446042 (V2)
General information
- This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual.
- Our products and user manuals are subject to a process of continuous development. We there‐fore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under www.thomann.de.
Further information
On our website (www.thomann.de) you will find lots of
further information and details on the following points:
Download | This manual is also available as PDF file for you to download. |
---|---|
Keyword search | Use the search function in the electronic version to find the |
topics of interest for you quickly.
Online guides| Our online guides provide detailed information on technical
basics and terms.
Personal consultation| For personal consultation please contact our technical
hotline.
Service| If you have any problems with the device the customer service will
gladly assist you.
Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal
words that are used in this manual.
Signal word | Meaning |
---|---|
DANGER! | This combination of symbol and signal word indicates an |
immediate dangerous situation that will result in death or serious injury if
it is not avoided.
WARNING!| This combination of symbol and signal word indicates a
possible dangerous situation that can result in death or serious injury if it
is not avoided.
NOTICE!| This combination of symbol and signal word indicates a possible
dangerous situation that can result in material and environmental damage if it
is not avoided.
Safety instructions
Intended use
- This device is intended for use as an electronic lighting effect by means of LED technology. The device is designed for professional use only and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
- This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.
- Extend the operating life of the device by regular breaks and by avoiding frequent switching on and off. The device is not suitable for continuous operation.
Safety
- DANGER!
- Danger for children
- Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices.
- DANGER!
- Electric shock caused by high voltages inside
- Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged.
- DANGER!
- Electric shock caused by short-circuit
- Always use proper ready-made insulated mains cabling (power cord) with a protective contact plug. Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a registered electrician.
- WARNING!
- Eye damage caused by high light intensity
- Never look directly into the light source.
- NOTICE!
- Risk of fire
- Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames.
- NOTICE!
- Voltage supply
- Connect the device directly to the power grid. It must not be connected to a dimmer. Before connecting the device, you have to ensure that the rated voltage indicated on the device matches the voltage of the power grid available in the operating place. You must also take care that the power grid is protected by a residual current circuit breaker. Failure to do so can result in damage to the device and injury to the user. In case a thunderstorm is coming up or you’re not going to use the device for a longer period of time, disconnect it from the power grid to reduce the risk of electric shock and fire.
Features
The device is characterized by:
- Robust metal housing
- Noiseless operation due to passive cooling
- High luminous power with low power consumption
- Outdoor use due to protection class IP65
- Lockable input socket (Power Twist IP65 TR1) for power supply, matching power cord included
Information about protection class IP65
- For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
- Equipment with protection class IP65 are dust-tight and completely protected against contact (first code number). They are also protected against splash water from any angle (second code digit). That is why this equipment can also be used outdoors. Event technology equipment is generally only designed for temporary use however (event lighting) and not for permanent use outdoors.
- The specified protection class does not make a statement about the weather resistance of the equipment (resistance to changing ambient conditions as well as against the effects of sun‐light and UV rays).
- The seals and screw connections of the equipment must be checked regularly to ensure a fault-free operation. In cases of doubt, consult a specialist workshop in due time.
Installation and starting up
Unpack and check carefully there is no transportation damage before using the
unit. Keep the equipment packaging. To fully protect the product against
vibration, dust and moisture during transportation or storage use the original
packaging or your own packaging material suitable for transport or storage,
respectively.
WARNING!
- Risk of injury caused by falling objects
- Make sure that the installation complies with the standards and rules that apply in your country. Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain.
NOTICE!
- Risk of overheating
- Always ensure sufficient ventilation.
- The ambient temperature must not exceed the limits stated in the chapter Tech‐nical Specifications of the User Manual.
NOTICE!
- Use of stands
- When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand.
Mounting options
-
You can install the unit in hanging or standing position. When in use, the device must always be attached to a solid surface or an approved truss. Use the openings of the bracket provided for mounting.
-
Always work from a stable platform whenever installing, moving or servicing the unit. In doing so, the area underneath the unit must be cordoned off.
-
The safety cable must be attached to the bracket.
Please note that this device must not be connected to a dimmer. -
Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards.
Technical specifications
LED Power-Flood Pro 100 W 6K, item no. 446041
Light source | 96 × Cree 3030, each 1 W |
---|---|
Light source properties | Colour temperature |
Colour rendering index | 73.6 CRI Ra |
Optical properties | Beam angle |
Power consumption | max. 100 W |
--- | --- |
Supply voltage | 100 – 240 V 50/60 Hz |
Degree of protection | IP65 |
Mounting options | Hanging, standing |
Dimensions (W × H × D)
(without bracket)
| 314 mm × 176 mm × 123 mm
Weight| 3.2 kg
Ambient conditions| Temperature range| –30 °C … +50 °C
Relative humidity| 20 %…80 %
(non-condensing)
LED Power-Flood Pro 200 W 6K, item no. 446042
Light source | 192 × Cree 3030, each 1 W |
---|---|
Light source properties | Colour temperature |
Colour rendering index | |
--- | --- |
Optical properties | Beam angle |
Power consumption | max. 200 W |
Supply voltage | 100 – 240 V 50/60 Hz |
Degree of protection | IP65 |
Mounting options | Hanging, standing |
Dimensions (W × H × D)
(without bracket)
| 314 mm × 352 mm × 123 mm
Weight| 5.2 kg
Ambient conditions| Temperature range| –30 °C … +50 °C
Relative humidity| 20 %…80 %
(non-condensing)
Further information
Item no. 446041 | Item no. 446042 | |
---|---|---|
Outdoor capable | Yes | Yes |
LED type | Unicoloured | Unicoloured |
Base housing | No | No |
Fanless | Yes | Yes |
Remote control | Not possible | Not possible |
Wireless DMX | No | No |
Housing colour | Black | Black |
Cleaning
Optical lenses
Clean the optical lenses, that are accessible from the outside, regularly in
order to optimize the light output. The frequency of cleaning depends on the
operating environment: wet, smoky or particularly dirty surroundings can cause
more accumulation of dirt on the optics of the device.
- Clean with a soft cloth using our lamp and lens cleaner (item no. 280122).
- Always dry the parts carefully.
Protecting the environment
Disposal of the packaging mate‐rial
- For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling.
- Ensure that plastic bags, packaging, etc. are properly disposed of.
- Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Disposal of your old device
- This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version.
- Do not dispose with your normal household waste.
- Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>