STAIRVILLE DDC-12 DMX Controller User Manual
- June 4, 2024
- STAIRVILLE
Table of Contents
- STAIRVILLE DDC-12 DMX Controller User Manual
- 1. General information
- 2. Safety instructions
- 3. Features
- 4. Starting up
- 5. Connections and controls
- 6. Technical specifications
- 7. Plug and connection assignment
- 8. Protecting the environment
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
STAIRVILLE DDC-12 DMX Controller User Manual
DDC-12
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
Internet: www.thomann.de
29.04.2022, ID: 258125 (V3)
1. General information
This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We therefore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under www.thomann.de.
1.1 Further information
On our website (www.thomann.de) you will find lots of further information and
details on the
following points:
1.2 Notational conventions
This manual uses the following notational conventions:
Letterings
The letterings for connectors and controls are marked by square brackets and
italics.
Examples: [VOLUME] control, [Mono] button.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal
words that are
used in this manual.
2. Safety instructions
Intended use
This device is used to control spotlights, dimmers, lighting effects equipment or other DMX controlled devices. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.
Safety
**DANGER!
Danger for children**
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard! Ensure that
children do not detach any small parts (e.g. knobs or the like) from the unit.
They could swallow the pieces and choke! Never let children unattended use
electrical devices.
NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct
heat source. Keep the device away from naked flames.
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy
dirt, and strong vibrations. Only operate the device within the ambient
conditions specified in the chapter ‘Technical specifications’ of this user
manual. Avoid heavy temperature fluctuations and do not switch the device on
immediately after it was exposed to temperature fluctuations (for example
after transport at low outside temperatures). Dust and dirt inside can damage
the unit. When operated in harmful ambient conditions (dust, smoke, nicotine,
fog, etc.), the unit should be maintained by qualified service personnel at
regular intervals to prevent overheating and other malfunction.
NOTICE!
External power supply
The device is powered by an external power supply. Before connecting the
external power supply, ensure that the input voltage (AC outlet) matches the
voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device
and possibly the user. Unplug the external power supply before electrical
storms occur and when the device is unused for long periods of time to reduce
the risk of electric shock or fire.
NOTICE!
Risk of fire due to incorrect polarity
Incorrectly inserted batteries may destroy the device or the batteries. Ensure
that proper polarity is observed when inserting batteries.
NOTICE!
Possible damage by leaking batteries
Leaking batteries can cause permanent damage to the device. Take batteries out
of the device if it is not going to be used for a longer period.
3. Features
Special features of this 12-channel DMX controller
- 12 channel faders
- Master fader
- Compact design
- Simple operation
- Power adapter included
4. Starting up
Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards.
Power supply
You can use either a 9-V battery or the 9-V connector for external power supply. Before connecting check for correct polarity.
Changing the battery
To insert or change the battery, switch off the device first and disconnect
the power adapter
from the device. Loosen the screws located at the four edges of the base
plate. Do not loosen
the three screws in the middle of the base plate. Carefully remove the base
plate. Take care not
to damage the cables. Change the battery. Remount the base plate without
squeezing the
cables. Insert and tighten the screws.
When a battery is inserted, 9-V external power adapter must not be connected!
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use
ordinary
microphone cables. Never connect the DMX input or output to audio devices such
as mixers or amplifiers.
Connections in DMX mode
Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W).
5. Connections and controls
Top view
Rear panel
6. Technical specifications
7. Plug and connection assignment
Introduction
This chapter will help you select the right cables and plugs to connect your
valuable equipment
so that a perfect light experience is guaranteed.
Please take our tips, because especially in ‘Sound & Light’ caution is
indicated: Even if a plug
fits into a socket, the result of an incorrect connection may be a destroyed
DMX controller, a
short circuit or ‘just’ a not working light show!
DMX connections
The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please refer to the drawing and table below for the pin assignment of a suitable XLR plug.
8. Protecting the environment
Disposal of the packaging material
For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose these materials with your normal household waste, but make sure that they are fed to a recovery. Please follow the notes and markings on the packaging.
Disposal of batteries
Batteries must not be disposed of as domestic waste or thrown into fire.
Dispose of the batteries
according to national or local regulations regarding hazardous waste. To
protect the environment, dispose of empty batteries at your retail store or at
appropriate collection sites.
Disposal of your old device
This product is subject to the European Waste Electrical and Electronic
Equipment Directive (WEEE) in its currently valid version. Do not dispose with
your normal household waste.
Dispose this device through an approved waste disposal firm or through your
local waste facility. When discarding the device, comply with the rules and
regulations that apply in your country. If in doubt, consult your local waste
disposal facility.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>