STAIRVILLE TinyBright IP Outdoor Spotlight User Guide
- June 3, 2024
- STAIRVILLE
Table of Contents
TinyBright IP
R10 / G10 / B10 / W10 3000K / UV10 / A10 / W10 5600K
Quick start guide
This quick start guide contains important information on the safe operation of the product. Read and follow the safety advice and instructions given. Retain the quick start guide for future reference. If you pass the product on to others please include this quick start guide.
Safety instructions
Intended use
This device is intended for use as an electronic lighting effect by means of
LED technology. The device is designed for professional use only and is not
suitable for use in households. Any other use or use under other operating
conditions is considered to be improper and may result in personal injury or
property damage. No liability will be assumed for damages resulting from
improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard! Ensure that
children do not detach any small parts from the product. They could swallow
the pieces and choke! Never let children unattended use electrical devices.
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers. There are no user-serviceable parts inside. Do not use the
device when covers, safety equipment or optical components are missing or
damaged.
Electric shock caused by short circuit
Do not modify the mains cable or the plug. Failure to do so may result in
electric shock and lead to a fire hazard and risk of death. If in doubt, seek
advice from a registered electrician.
Eye damage caused by high light intensity
Never look directly into the light source.
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct
heat source. Keep the device away from naked flames.
Power supply
Connect the device directly to the power grid. This device must not be
conntected to a dimmer. Before connecting the device, ensure that the input
voltage (AC outlet) matches the voltage rating of the device and that the AC
outlet is protected by a residual current circuit breaker. Failure to do so
could result in damage to the device and possibly the user. Unplug the device
before electrical storms occur and when it is unused for long periods of time
to reduce the risk of electric shock or fire.
Features
- LED floodlight for decorative illumination for outdoor use due to degree of protection IP65
- Removable ground spike
- Pressure compensation valve for long lifetime
- Robust and elegant housing of aluminium
Connecting the DMX IP65 connectors
Connections
- Locking screw for the bracket
- Bracket for floor placement or hanging
- Removable ground spike
- Power cord
- Pressure compensation valve
Connecting the DMX IP65 connectors
Proceed as follows to connect the DMX-IP65 connectors:
- Insert the plug completely and straight into the coupling.
- Make sure that the flexible sealing ring has complete contact.
- Turn the union nut straight onto the thread of the coupling.
Hand-tighten the union nut.
Technical specifications
- Light source:
1 × LED 10 W red (item no. 505851)
1 × LED 10 W green (item no. 505852)
1 × LED 10 W blue (item no. 505853)
1 × LED 10 W white (item no. 505854, 505857)
1 × LED 10 W UV (item no. 505855)
1 × LED 10 W amber (item no. 505856)
- Beam angle: 25°
- Colour temperature: 3000 K (item no. 505854), 5600 K (item no. 505857)
- Colour rendering index: CRI 80 (item no. 505854, 505857)
- Power consumption: 15 W
- Supply voltage: 100 – 240 V ~ 50/60 Hz
- Degree of protection: IP65
- Mounting options: floor placement or hanging, ground spike
- Dimensions (W × H × D): without ground spike: 122 mm × 144 mm × 136 mm, with ground spike: 122 mm × 353 mm × 136 mm
- Weight: 0.95 kg
- Ambient conditions: Temperature range: 0 °C…40 °C, Relative humidity: 20 %…80 % (non-condensing)
For the packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose with your normal household waste. Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach •www.thomann.de • info@thomann.de
DocID: 505851_505852_505853_505854_505855_505856_505857_23.07.2021