Bright 024414 Massage Cushion With Heat Instruction Manual

June 12, 2024
Bright

Bright 024414 Massage Cushion With Heat

Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation. It is not allowed to modify or alter this documentation in any way and the manual shall be printed and used as it is in relation to the product. For the latest version of operating instructions, refer to the Jula website

SAFETY INSTRUCTIONS

  • The product must only be used for its intended purpose and in accordance with these instructions.
  • Always unplug the power cord immediately after use and before cleaning. Do not expose the product to rain or moisture, and do not use it if it is not dry. Never immerse the product in water or any other liquid.
  • Do not use the product in conjunction with a bath or shower.
  • Do not place or store the product where it could drop, or be pulled down into a bath or washbasin.
  • Do not attempt to pick up a product that has been dropped in water or any other liquid. Pull out the plug immediately.
  • Never use needles or other metal objects together with the product.
  • Never leave the product unattended when plugged in. Pull out the plug when the product is not in use, before replacing parts and before cleaning.
  • Keep the product under careful supervision when it is used by, or near children or persons with functional disorders.
  • The product must only be used for its intended purpose and in accordance with these instructions. Only use accessories included with the product.
  • Do not use the product if the power cord or plug are damaged, if the product has been in contact with water, is not working properly, or if it is damaged in any other way.
  • Keep the power cord away from hot surfaces.
  • Never use the product while you are sleeping, and do not fall asleep when using it.
  • Never poke any objects through the openings in the product.
  • Do not use the product if aerosol products or oxygen are being used nearby
  • Never use the product under a quilt, blanket or cushion. The product can overheat – risk of fire, and/or personal injury.
  • Do not carry or pull the product by the power cord.
  • To switch off the product, put all the controls in the off position and pull out the plug.
  • The product is only intended for household use. It is not intended for professional use.
  • Do not use the product outdoors.
  • Do not use the product on small children, people with functional disorders, or people who are asleep or unconscious.
  • Do not use the product on persons with sensitive skin or poor circulation.
  • Never place heavy objects on the product. Avoid sharp folds.
SYMBOLS

| Read the instructions.
---|---
| Safety class II
| Approved in accordance with the relevant directives.
| Recycle discarded product in accordance with local regulations.

TECHNICAL DATA

Output 36 W
Voltage 12 V
Cord length 214 cm

DESCRIPTION

Massages the upper and lower part of the back with warmth and vibration (the product has 4 modes: all of the back, the upper part of the back, the lower part, and demo cycle). The different functions, spot, zone or full massage, with or without heat and seat vibration in three speeds, are easy to choose with the wired remote control. The built-in LED indicator lights up the selected functions in the cushion. Automatic power-off after 15 minutes.
Adjustable elastic strap for simple use on optional seat. Storage pocket for the remote control. AC adapter for the home/office, and 12 V adapter for the car included.

Parts

  1. Seat cover
  2. Control unit
  3. Storage pocket for control unit
  4. Vibrating seat cushion

Control unit

  1. ON/OFF button
  2. Button for heat
  3. Button for spot massage down
  4. Lower part of the back
  5. Seat vibration
  6. Spot massage
  7. Button for spot massage up
  8. Upper part of the back
  9. All of the back
    **FIG. 1

**

USE

POWER SWITCH

Activate the massage function by pressing the ON/OFF button. The status light goes on. Switch off the massage function by pressing the ON/OFF button again. The status light flashes while the massage mechanism returns to the lowest point and then switches off.

NOTE:

The product switches off automatically after 15 minutes to ensure safe use.

SPOT MASSAGE

When the massage function is activated, press any button to stop and concentrate the massage to one spot. When spot massage is activated the massage point can be moved by pressing one of the buttons until the required massage point is reached. Press the up button to move the massage point up, and the down button to move it down. The massage continues at that point when the button is released.

SEAT VIBRATION

Press the SEAT VIBRATION button to activate this function. There are 3 modes. Press once for low, 2 times for medium and 3  times for intense, and press 4 times to switch of the vibration function.

BUTTON FOR HEAT

Press the HEAT button for comforting heat during the massage. The red status light goes on. Switch off by pressing the button again. The status light goes off. To ensure safe use it is not possible to activate heat unless the massage function is activated.

MASSAGE ZONES

Use the zone buttons to select massage of different parts of the back. Press the button for the required part of the back. The corresponding status light goes on. Switch off by pressing the button again. The status light goes off.

Upper part of the back

The massage mechanism works on the upper part of the back.

Lower part of the back

The massage mechanism works on the lower part of the back.

All of the back

The massage mechanism works up and down along the back.

MAINTENANCE

STORAGE

The product should be stored in a dry and cool place in its original packaging. Keep the product and power cord away from sharp or pointed objects that can damage the surface. Do not wind the cord round the product. Do not hang or carry the product by the power cord to the control unit

CLEANING

  • Pull out the plug and allow the product to cool before cleaning.
  • Clean with a soft, slightly damp sponge. • Do not expose the product to water or any other liquid.
  • Do not immerse the product in water or any other liquid.
  • Never use abrasive detergents, brushes, petrol/paraffin, polish, thinner or other similar products.
  • Do not attempt to repair or dismantle the product – risk of serious personal injury. The product does not contain any parts that can be repaired by the user.
  • Always store the control unit in the pocket when not in use.

MAINS ADAPTER

Mains adapter for use in the home or office included. The mains adapter connect to the underside of the control unit. Plug the mains adapter into a power point. The product has an earthed plug that only fits earthed power points.

TROUBLESHOOTING

The product does not start.

  • Check that the mains adapter is correctly inserted in the power point.
  • Do not use the product continuously for long periods.
  • Switch off the product and allow it to cool before using it again.

Bright Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Bright User Manuals

Related Manuals