Speculative Product Design GEMTONES Sport True Wireless Earbuds User Manual
- June 12, 2024
- Speculative Product Design
Table of Contents
Speculative Product Design GEMTONES Sport True Wireless Earbuds
Product Description
- Left Gemstone
- Right Gemstone
- Multifunction Buttons
- Indicators/ Microphones
- Charging Contacts
- Case Charge Indicator
- Lid Release
- Wireless Charging Surface (Bottom) or USB-C Charging (Rear)
Power on/off
- Power on: Take out the earphones from the charging case and they will turn on automatically
- Power of: Put the earphones into the charging compartment and close the lds, and the earphones wl automatically shut down. If they are not connected to any device within 3 minutes, they wl automatically shut down
Bluetooth pairing
-
Open the charging compartment, take out the headset and autoscale the turnt0n.
-
After the power is turned on, put the left and right earphones dose lo each other. After the lead is successful for the indicator lights: the main earphone flashes alternately ed and blue, and the secondary earphone lashes ble once every 5 seconds.
Flashes of blue Red/Blue
- light once: right
- every: flashes
- 5 seconds: alternately
Open the Bluetooth interface of the mobile phone, and search for “Earwors, dick pairing, the connection is successful with s post tone.
Music
- Music Pause/Ply: While playing, dick the multifunction ouch key.
- Previous song: Double-click the left earphone muk-function fouch key.
- Next song: Double-click the right earphone malfunction ouch key.
Wake up voice assistant function
requires mobile phone support Tap either headset three times in a row to start
and 1 dick Exit to close Sin.
Call
Answer: When there is an incoming call,1 click the mut →uncton touch key of either earphone Reiec: When there is an incoming call, long press the multi- function key for 2 seconds Hang up: During a cal, 1 dick the mult-function touch key Third-party calls; When a third-party call in, dick to hang up he current cal and answer the cal; double-click to answer he calls and hold the current call, double-click again to switch he call, click to hang up the current cal and automatically return to another cal.
Headphone factory reset
- One ear quickly strikes four fires when paired, and does not let go when the fourth hi, long press the 5S “beep’ sound and then releases, the headphones reset and shut down.
Charge
- Charge the charging compartment through the charging cable, and the indicator light of the charging compariment s always on when fully charged
- Put the earphones into the charging compartment, they will be charged automatically, and the indicator lght of he earphones will turn of when fully charged
| Headphones charging | Light |
|---|---|
| Headphones are fully | Light off |
Chargedcharging
case
| Light flashes
The charging case is fully
charged
| Light on
Specifications
- term No: GEMTONES，GEMTONES Play
- Bluetooth Version: 5.3(JL chipset)
- Profle suppot: HSPHFPIA2DPIAVRCP
- Audio Decoding: SBC+AAC(AACneeds license tee)
- Earphone Battery capacity: 3.7V:2*40 mA
- Charging base: 3.7V/500mAh 3.7V/600mAh 3.7V 700mAh/ 3.7V800mAh/ 3.7V 1200mAh Recharggable 2-3 times
- Charging time: 1.5 hours Playing time about 7 hours (80%
- Walerprcol: IPX5
- Size of earphones: 2116.824mm
- Size of charging base: 60.540.225mm
- Charging port: USB-c, no Wireless charge function
- Material: ABS
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.