Speculative Product Design GEMTONES Pro True Wireless Earbuds User Manual

Speculative Product Design GEMTONES Pro True Wireless Earbuds

Product Information

• Model: GEMTONES Pro
• FCC ID: 2BBAS-GEMTONESPRO

Product Description
The GEMTONES Pro True Wireless Earbuds are high-quality earphones that provide a wireless audio experience. They come with a charging case for easy storage and charging.

Power On/Off

• Power On: Take out the earphones from the charging case and they will turn on automatically.
• Power Off: Put the earphones into the charging compartment and close the lid. The earphones will power off.

Music

• Music Pause/Play: While playing, click the multi-function touch key.
• Previous Song: Double-click the left earphone multi-function touch key.
• Next Song: Double-click the right earphone multi-function touch key.

Charge
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

To charge the earphones, connect the charging cable to the charging compartment. The indicator light of the charging compartment will be on when fully charged.

Wake up Voice Assistant Function
To wake up the voice assistant function, tap either headset three times in a row.

Bluetooth Pairing
To pair with a mobile phone, open the charging compartment and take out the headset. The headset will automatically turn on and enter pairing mode.

Call

• Answer Call: When there is an incoming call, click the multi-function touch key of either earphone.
• Reject Call: When there is an incoming call, long press the multi-function touch key.
• Third-Party Calls: When a third-party calls in, click to hang up the current call and automatically switch to another call; double-click to answer the call and hold the current call, double-click again to switch the call, click to hang up the current call and return to another call.

Specifications

• Bluetooth Version: 5.3 (JL chipset)
• Profile Support: HSP, HFP, A2DP, AVRCP
• Audio Decoding: SBC+AAC (AAC needs license fee)
• Earphone Battery Capacity: 3.7V, 2*40 mA
• Charging Base: 3.7V/300mAh, 3.7V/450mAh (Rechargeable 2-3 times)
• Charging Time: 1.5 hours

Product Description

1. Multifunction key
2. Headphone LED/Microphone
3. Headphone charging contact
4. Charging compartment LED
5. Press the button
6. Type-C charging port

Power on/off

• Power on: Take out the earphones from the charging case and they will turn on automatically
• Power of: Put the earphones into the charging compartment and close the lids, and the earphones automatically shut down. If they are not connected to any device within 3 minutes, they wl automatically shut down

Bluetooth pairing

1. Open the charging compartment, take out the headset, and autoscale turn.
2. After the power is turned on, put the left and right earphones dose to each other. After the leam is successful for the indicator lights: the main earphone flashes alternately ed and blue, and the secondsry earphone lashes ble one every 5 seconds

Open the Bluetooth interface of the mobile phone, and search for “Earwors, dick pairing, the connection is successful with s post tone

Music

• Music Pause/Ply: While playing, dick the mult-function ouch key
• Previous song: Double-click the left earphone muk-function touch key
• Next song: Double-click the right earphone mut- function ouch key

Wake up voice assistant function

Requires mobile phone support
Tap either headset three times in a row to start and 1 dick Exit to close Sin

Call

• Answer: When there is an incoming call, 1 click the mut uncton touch key of another earphone
• Reiec: When there is an incoming call, long press the multi-function key for 2 seconds
• Hang up: During a cal, 1 dick the mult-function touch key
• Third-party calls; When a third-party calls in, dick hangs up the current call and answers the call; double-click to answer

The call and hold the current call, double-click again to switch the calls, click to hang up the current call, and automatically return to another cal

Headphone factory reset

One ear quickly strikes four fires when paired, and does not let go when the fourth hi, Long press the 5S “beep sound and then release, and the headphones reset and shut down

Charge

1. Charge the charging compartment through the charging cable, and the indicator light of the charging compariment s always on when fully charged
2. Put the earphones into the charging compartment, they will be charged automatically, and the indicator lght of the earphones will turn off when fully charged

Specifications

• Item No.: GEMTONES，GEMTONES Play
• Bluetooth Version: 5.3(JL chipset)
• Profle suppot: HSPHFPIA2DPIAVRCP
• Audio Decoding: SBC+AAC(AACneeds license tee)
• Earphone Battery capacity: 3.7V:2*40 mA
• Charging base: 3.7V/300mAh 3.7V/450mAh
• Rechargeable 2-3 times
• Charging time: 1.5 hours
• Playing time about 7 hours (80%
• Walerprcol: IPX5
• Size of earphones: 2116.824mm
• Size of charging base: 60.540.225mm
• Charging port: USB-c, no Wireless charge function
• Material: ABS

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Warning

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exp osure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>