Speculative Product Design GEMTONES True Wireless Earbuds User Manual
- June 12, 2024
- Speculative Product Design
Table of Contents
GEMTONES Play
True Wireless Earbuds
FCC ID:2BBAS-GEMTONES
Manual
Product Description
1：Mutfunction key
2：Headphone LED/Microphone
3：Headphone charging contact| 4：Charging compartment LED
5：Press the button
6：Type-C charging port
---|---
Power on/off
Power on: Take out the earphones from the charging case nd they will turn on
automatically
Power off: Put the earphones into the charging compartment and close the lids,
and the earphones will automatically
shut down. If they are not connected to any device within 3 minutes, they will
automatically shut down
Bluetooth pairing
-
Open the charging compartment, take out the headset, and automatically turn on.
-
After the power is turned on, put the left and right earphones dose to each other. After the item is successfully formed the indicator lights: the main earphone
flashes alternately red and blue, and the secondary earphone flashes blue once every 5 seconds|
---|---
Flashes blue light once every 5 seconds| Red/Blue light flashes alternately
Open the Bluetooth interface of the mobile phone, Search for “Earworms, dick pairing, the connection is successful with a post tone
Music
Music Pause/Ply: While playing, dick the multifunction ouch key Perilous song: Double-click the left earphone multifunction touch key Next song: Double-click the right earphone multifunction touch key
Wake up voice assistant function
requires mobile phone support Tap either headset three times in a row to start and 1 dick Exit to close Sin
Call
Answer: When there is an incoming call,1 click the multifunction touch key of
another earphone
Reece: When there is an incoming call, long press the multifunction key for 2
seconds
Hang up: During a call, 1 dick the multifunction touch key
Third-party calls; When a third-party calls in, dick to hang up he current
call and answer the call; double-click to answer the call and hold the current
call, double-click again to
switch the call, click to hang up the current call and automatically return to
another call
Headphone factory reset
One ear quickly strikes four firnes when paired, does not let go when the fourth hi, long press the 5S “beep’ sound and then releases, the headphones reset and shut down
Charge
- Charge the charging compartment through the charging cable, and the indicator light of the charging compartment s always on when fully charged
- Put the earphones into the charging compartment, they will be charged automatically, and the indicator light of he earphones will turn off when fully charged
| Headphones charging | Light |
|---|---|
| Headphones are fully | Light off |
| Charged charging case | Light flashes |
| The charging case is fully charged | Light on |
Specifications
item No.: GEMTONES，GEMTONES Play
Bluetooth Version:5.3(JL chipset)
Profile support: HSPHFPIA2DPIAVRCP
Audio Decoding: SBC+AAC(AA Needs license tee)
Earphone Battery capacity:3.7V:240 mA
Charging base:3.7V/300mAh 3.7V/380mAh
Rechargeable 2-3 times
Charging time: 1.5 hours
Playing time about 7 hours (80%
Walerprcol: IPX5
Size of esrphone:2116.824mm
Size of charging bese:60.540.2*25mm
Charging port: USB-c, no Wireless charge function
Material: ABS
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC warning:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>