kanto SP9 Speaker Stand User Manual
- October 30, 2023
- Kanto
Table of Contents
kanto SP9 Speaker Stand
Product Information
| Product Name | SP9 / SP9W Speaker Stand |
|---|---|
| Maximum Loading Weight | 30 lb (13.6 kg) |
| Compatibility | Designed for use with products within the specified maximum |
weight limit
Manufacturer| Kanto Living Inc.
Warranty| 2 years limited warranty
Thank you for choosing Kanto
Read these instructions fully before assembly and installation. If you do not
understand these directions, or have any doubts about the safety of the
installation, please consult a qualified installation contractor. Make sure
there are no defective or missing parts. Do not use defective parts. Kanto
cannot be liable for property damage or injury caused by incorrect mounting,
incorrect assembly, lifting or incorrect use of this product. If there is
hardware missing, or if you are uncertain whether a part is defective, please
contact Kanto directly using one of the methods below.
CAUTION
The maximum loading weight is 30 lb (13.6 kg). This speaker stand is intended
for use only with the maximum weights indicated. Use with products heavier
than the maximum weights indicated may result in instability causing possible
injury.
Product Usage Instructions
Warranty
Limited Warranty to Original Purchaser
Kanto Living Inc. (Kanto) warrants the equipment it manufactures to be free
from defects in material for the limited warranty period of 2 years.
If equipment fails because of such defects and Kanto is notified within 2
years from the date of shipment with proof of original invoice from an
authorized reseller, Kanto will, at its option, provide replacement parts or
replace the equipment, provided that the equipment has not been subjected to
mechanical, electrical, or other abuse or modifications. Any replacement parts
or replacement units are warranted for 90 days from the day of reshipment to
the original purchaser.
Customers will be responsible for obtaining a Return Authorization Number and
paying shipping costs to return product to a Kanto location or authorized
depot. If the equipment is covered under the warranty provisions above, Kanto
will replace parts or provide a replacement unit, and be responsible for
shipping costs to the customer. Please keep the original packaging to prevent
damage to the product during shipping. Insuring your shipment is also
recommended.
The information in the manual has been carefully checked and is believed to be
accurate. However, Kanto assumes no responsibility for any inaccuracies that
may be contained in the manual. In no event will Kanto be liable for direct,
indirect, special, incidental, or consequential damages resulting from any
defect in the equipment, even if advised of the possibility of such damages.
This warranty is in lieu of all other warranties expressed or implied,
including without limitation, any implied warranty, including any warranty of
merchantability and fitness for any particular purpose, all of which are
expressly disclaimed.
For further support, you can visit the Kanto
Audio website, contact support via email at
support@kantoliving.com, or call their toll-
free number for US & Canada: 1-888-848-2643.
Supplied Parts and Hardware
Project Overview
-
Assemble Base
-
Insert Cables
-
Change to Large Top Plate (Optional)
Optional step. You may wish to use the large top plate with large speakers .
-
Adjust Top Plate Angle (Optional)
-
Mount Speaker (Optional)
Optional step. Only for speakers with standard threaded speaker mount. Speaker not included.
-
Mount Top Plate
NOTE
Procedure is the same if you did not mount a speaker in step 3.
If you have any problems or difficulties while following these instructions,
please contact Kanto directly:
Email: support@kantoliving.com
Toll Free: US & Canada: 1-888-848-2643