ADLER AD7725 Radiant Heater User Manual

: June 12, 2024
: ADLER

Table of Contents

AD 7725
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ADLER logo1

AD 7725

user manual

Model identifier:|

AD7725 black / AD7725 white

|
---|---|---

Item

Unit

Heat output| | | Type of heat input, for electric storage local space heaters only (select one)
Nominal heat output|

P nom

| 2,0|

kW

| | manual heat charge control, with integrated thermostat| [no]
Minimum heat output (indicative)|

P min

| 1,0|

kW

| | manual heat charge control with room and /oroutdoor temperature feedback| [no]
Maximum continuous heat output|

Pmax,c

| 2,0|

kW

| | electronic heat charge control with room and /or outdoor temperature feedback| [no]
Auxiliary electricity consumption| | | | | fan assisted heat output| [no]
At nominal heat output|

el max

| N/A|

kW

| | Type of heat output/room temperature control (select one)
At minimum heat output|

el min

| N/A|

kW

| | single stage heat output and no room temperature control| [no]
In standby mode|

el SB

| 0,0|

kW

| | two or more manual stages, no room temperature control| [no]
| | | with mechanic thermostat room temperature control| [yes]
| | | with electronic room temperature control| [no]
| | | electronic room temperature control plus day timer| [no]
| | | electronic room temperature control plus week timer| [no]
| | | Other control options(multiple selections possible)
| | | room temperature control, with presence detection| [no]
| | | room temperature control, with open window detection| [no]
| | | with distance control option| [no]
| | | with adaptive start control| [no]
| | | with working time limitation| [no]
| | | with black bulb sensor| [no]
Contact| Adler Sp. z o.o. ul. Ordona 2A, 01-237 Warszawa, Polska

ADLER AD7725 Radiant Heater - a3

This product is suitable only for occasional use or for use in well insulated rooms.

SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

The warranty conditions are different, if the device is used for commercial purpose.”

Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
The applicable voltage is 220-240V, ~50/60Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
Never use the product close to combustibles.
Do not let cord hang over edge of counter or touch hot surfaces.
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
Never use this device close to water, e.g.: under shower, in bathtub, or above sink filled with water.
If using the device in bathroom after use remove the power plug from the socket, because water proximity presents risk, even if the device is turned off.
Do not put your fingers or any objects through the ventilation grille
Do not place any objects on the convector. The vents must not be covered by a towel , curtain , etc. may cause a malfunction or fire.
Keep the distance between the convector and other items such as furniture, curtains.
Convector is equipped with a device to prevent overheating. Automatically turns off the convector in the event of excessive temperature convector (due to clogged vents, fan malfunction ). In this case, disconnect the unit from the power supply , waiting a few minutes and remove the cause of overheating,
Do not touch the hot parts of the convector . Do not touch the appliance with wet hands.
In the case of wet convector or falling of any object through the ventilation grille of the convector , turn it off immediately and disconnect from the network. Before re- use with convector call for service.
Do not place the convector directly below the electrical outlet.
Always turn off the convector button before disconnecting it from the mains.
Do not use this heater in the immediate vicinity of a bathtub, shower or swimming pool
Do not use this heater if it has been dropped
Do not use if there are visible signs of damage to the heater
Use the heater on a level and stable surface or attach it to the wall, if provided for by the manufacturer

WARNING: Do not use this heater in small rooms where there are people who are unable to leave them by themselves, unless constant supervision is ensured.
WARNING: To reduce the risk of fire, keep textiles, curtains or other flammable materials at least 1 m away from the heater air outlet.

Device Description: Thermo-fan

Handle
Air inlet grid
Air outlet grid
Feet
Power knob
A – cool air ventilation
B – warm temperature ventilation
C – hot temperature ventilation
D – control lamp
Adjustable thermostat knob

OPERATION

Before using the device make sure that it is on a flat and stable surface. Damage may occur if it is placed on an incline or decline.
Turn off the power knob and the adjustable thermostat, next plug into socket directly. Be sure plug fits tightly into outlet.
Turn the thermostat in a clockwise direction until it reaches the maximum setting max “+”.
Turn the power knob to position A to have got the cool air ventilation.
Turn the power knob to position B to have got the warm temperature air ventilation.
Turn the power knob to position C to have got the hot temperature air ventilation.
When the room reaches desired temperature, turn the thermostat knob anti-clockwise until the control lamp switch off which indicates that the thermostat has been disconnected.
Turn the power knob to position D to switch off the device.

OVERHEAT PROTECTION

This device is equipped with an overheat protection that switches off the device automatically in case of severe overheating. In this case, unplug the device, wait for about 30 minutes for it to cool down and remove any possible cause of overheating, e.g. something covering the heater. Check for surface damage to the appliance, the cord and the plug. If there is no damage, plug in the unit again and switch it on as described above. If the device still does not turn on, please contact authorized service for assistance.

Maintenance

Always remove the plug from the socket-outlet and allow the heater to cool down before clean it.
Never immerse the device in water.
Wipe the exterior surface of the heater occasionally with a soft damp cloth (not dripping wet) and dry the exterior surface before operating the heater.

TECHNICAL DATA

Voltage: 220-240V ~50Hz
Power: 2000W

Device is made in class I of insulation and has to be connected only to power outlet with ground circuit. Device is compliant with EU directives:
– Low voltage directive (LVD)
– Electromagnetic compatibility (EMC)
Device marked CE mark on rating label

To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the common waste bin.