HYTRONIK HCD038/CA Bluetooth DALI Control Base Instructions

Detached Motion Sensor with Mesh
HCD038/CA
Casaba Enabled
Instructions

Product Description

HCD038/CA is a Bluetooth DALI control base with 30mA DALI power supply built in, it can work with a wide range of microwave and PIR sensor heads. It is ideal for plastic luminaires as compared to metal luminaires because Bluetooth signal can transmit through plastic. It is suitable for any typical indoor applications such as office, classroom, car park, warehouse and other commercial/industrial areas. HCD038/CA works with CBU-ASD module for either 1-10V or DALI output. Meanwhile, all commissioning and settings can be done via app.

Hardware Features

30mA DALI broadcast output for up to 15 LED drivers
2 push input for flexible manual control
Detached linear design to suit luminaires with limited space inside
Use Casaba app for commissioning
Device firmware update over-the-air
5-year warranty
Free smartphone App for set-up and commissioning

Technical Specifications

Bluetooth Transceiver

Operation frequency| 2.4 GHz – 2.483 GHz
Transmission power| Max 4dBm
Range (Typical )| 10~30m
Environment

Operation temperature| Ta: -20°C ~ +55°C
Case temperature (Max.)| Tc: +75°C
IP rating| IP20
Input & Output Characteristics

Mains voltage| 220~240VAC 50/60Hz
Stand-by power| <0.5W
Warming-up| 20s
Load ratings| 30mA (max. 15 devices)

Mechanical Structure & Dimensions

HCD038/CA

Wire Preparation

To make or release the wire from the terminal, use a screwdriver to push down the button.

Wiring Diagram

Technical Specifications for Sensor Heads

PIR Sensor Properties

Sensor principle| PIR detection
Operating voltage| 5VDC
Detection range | HIR05 & HIR05/FM HIR05/AA & & HIR07| Max installation height: 3m; Max detection range: 6m (diameter)
HIR11| Max installation height: 15m (forklift); 12m (single person); Max detection range: 24m (diameter)
HIR12| Max installation height: 15m (forklift); 12m (single person); Max detection range: 18m6m (L*W)
HIR63| Max installation height: 3m; Max detection range: 12m (diameter)
HIR63/R| Max installation height: 12m (forklift); 8m (single person); Max detection range: 14m (diameter)
HF Sensor Properties

Sensor principle| High Frequency (microwave)
Operating voltage| 5VDC
Operation frequency| 5.8GHz +/- 75MHz
Transmission power| <0.2mW
Detection range *| SAM20 & SAM21 SAM22 & SAM22/AA| Max installation height: 3m; Max detection range: 12m (diameter)
SAM23| Max installation height: 15m (forklift); 12m (single person); Max detection range: 20m (diameter)

• The detection range is heavily infiuenced by sensor placement (angle) and different walking paces.
  It may be reduced under certain conditions.
  PIR & microwave sensor heads
  The range of PIR and microwave sensor heads below offers powerful number of Plug’n’Play feature options to expand the flexibility of luminaires design. This approach to luminaire design reduces space requirements and component costs whilst simplifying production.
  A. HIR05
  PIR sensor head
  The cable length is around 30cm.

B. HIR05/FM
PIR sensor head
The cable length is around 30cm.

C. HIR05/AA
PIR sensor head Adjustable angle
The cable length is around 30cm.

D. HIR07
PIR sensor head
Photocell Advance™
The cable length is around 30cm.

E. HIR11/S
PIR sensor head
Surface mounting
For highboy application
IP65 (facia / lens part)
The cable length is around 30cm.

F. HIR11/F
PIR sensor head
Flush mounting
For highbay application
IP65 (facia / lens part)
The cable length is around 30cm.

G. HIR11/C
PIR sensor head
Screw to the luminaire by conduit
For highboy application
IP65 (facia / lens part)
The cable length is around 30cm.

H. HIR12
PIR sensor head
For highbay application
IP65 (facia / lens part)
The cable length is around 30cm.

Installation for HIR12

We suggest that the metal plate thickness to be 0.8mm – 1.6mm to ensure perfect focal length for the PIR lens.
I. HIR63
PIR sensor head
The cable length is around 30cm.

J. HIR63 with HA04
PIR sensor head
Optional accessory
The cable length is around 30cm.

K. HIR63 with HA05
PIR sensor head
Optional accessory
The cable length is around 30cm.

L. HIR63/R
PIR sensor head
IP65 (facia / lens part)
The cable length is around 30cm.

M. SAM20
HF sensor head
Photocell Advance™
The cable length is around 30cm.

N. SAM21
HF sensor head
IP65
The cable length is around 30cm.

O. SAM22
HF sensor head
Flush mount
The cable length is around 30cm.

P. SAM22/AA
HF sensor head
Adjustable angle
The cable length is around 30cm.

Q. SAM23
HF sensor head
Photocell advance™
For highboy application
The cable length is around 30cm.

Detection Pattern

*The detection patterns are based upon 5km/h movement speed.

HIR11 Series (High-bay)

| HIR11serie s: High-bay lens detection pattern for forklift @ Ta = 20OC
(Recommended installation height 10m-15m )
A: Tangential movement| B: Radial movement| Mount height| Tangential (A)| Radial (B)
10m| max 380m2 (Ø = 22m)| max 201m2 (Ø = 16m)
11m| max 452m2 (Ø = 24m)| max 201m2 (Ø = 16m)
12m| max 452m2 (Ø = 24m)| max 201m2 (Ø = 16m)
13m| max 452m2 (Ø = 24m)| max 177m2 (Ø = 15m)
14m| max 452m2 (Ø = 24m)| max 133m2 (Ø = 13m)
15m| max 452m2 (Ø = 24m)| max 113m2 (Ø = 12m)
| HIR11 serie s: High-bay lens detection pattern for single person @ Ta =20 C
(Recommended installation height 2.5m-12m )
---|---
A: Tangential movement| B: Radial movement| Mount height| Tangential (A)| Radial (B)
2.5m| max 50m2 (Ø = 8m)| max 7m2 (Ø = 3m)
6m| max 104m2 (Ø = 11.5m)| max 7m2 (Ø = 3m)
8m| max 154m2 (Ø = 14m)| max 7m2 (Ø = 3m)
10m| max 227m2 (Ø = 17m)| max 7m2 (Ø = 3m)
11m| max 269m2 (Ø = 18.5m)| max 7m2 (Ø = 3m)
12m| max 314m2 (Ø = 20m)| max 7m2 (Ø = 3m)

Additional Information / Documents

1. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download/knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
2. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/Bluetooth 5.0 SIG mesh system ->Partnership
3. Regarding Hydronic standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy

Subject to change without notice.
Edition: 14 Jan. 2022 Ver. A2 Page 7/7

References

• Catalogue_Hytronik

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>