Ruijie RC-RAP2200E Dual Band Ceiling Mount WiFi Access Point Installation Guide
- June 12, 2024
- RuiJie
Table of Contents
Ruijie RC-RAP2200E Dual Band Ceiling Mount WiFi Access Point
To better use the Ruijie device, read this manual before Installation and usage, and save the manual for future reference.
Packing List
| Item | Name | Quantity | Unit |
|---|---|---|---|
| 1 | RG-RAP2200(E)Host | 1 | Set |
| 2 | Mounting Bracket | 1 | Piece |
| 3 | Phillips Pan Head Screw | 2 | Piece |
| 4 | Expansion Anchor | 2 | Piece |
| 5 | This Quick Installation Guide | 1 | Copy |
| 6 | Warranty Card | 1 | Copy |
Appearance and Interface
Top View
Bottom View 
- When powering the AP through PoE, connect one end of the Ethernet cable to LAN1/PoE port and the other end to a PoE-capable device.
- When powering the AP via local power supply, connect the DC-12V/1.5A power adapter to the power port.
LED Indicator and Button
| LED Indicator and Button | Frequency | Description |
|---|
LED Indicator
| Solid green| Normal operation
Off| The AP not receiving power.
Blinking(0.5Hz)
| Normal operation, but the AP is not connected to Ruijie Cloud.
Fast blinking(10Hz)
| Possible cases:
1. Restoring the factory default settings
2. Upgrading the firmware 3.Restoring the image file
4. Initializing the device
Reset Button
| Press for less than 2 seconds| Restart the device
Press for more than 5 seconds| Restore the factory default settings
Product Installation
Attach the mounting bracket on the ceiling.
Connect the Ethernet cable to the LAN port
Align the square feet on the rear of the AP over the mounting holes on the bracket. Slide the AP into the holes until it clicks into place.
Network Configuration
Method 1 (Recommended)
Scan the QR-code on the manual or device to download the Ruijie Cloud App, and
configure the network according to guide on App.
Method 2
Connect to the SSID (@Ruijie-mxxxx when there are multiple devices and
@Ruijie-sxxxx when there is only one device), or connect the cable with LAN
port, and visit http:/110.44.77.253 (default password: admin). It is
recommended to configure the IP address as 10.44.77.250.
Note : This equipment is restricted to indoor operation in 5.15-5.25GHz
for Hong Kong.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>