DECIMATOR DESIGN DMON-16S 16 Channel SDI Multi Viewer Instruction Manual

: June 13, 2024
: DECIMATOR DESIGN

Table of Contents

DECIMATOR DESIGN DMON-16S 16 Channel SDI Multi-Viewer
Product Information
Product Usage Instructions
Introduction
Main Menus
SERVICE WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DECIMATOR DESIGN DMON-16S 16 Channel SDI Multi-Viewer

Product Information

Product Name: DMON-16S
Description: 1 to 16 Channel (3G/HD/SD)-SDI Multi-Viewer with SDI and HDMI outputs
Firmware Version: 1.3

The DMON-16S is a portable converter that allows you to view up to 16 channels of video on a single display. It supports 3G, HD, and SD-SDI formats and provides both SDI and HDMI outputs. The device features an easy-to-use LCD and button control system,eliminating the need for a computer to access its features. With the DMON-16S, you can effortlessly change settings and access advanced features without the hassle of complicated dip switches or carrying around a computer.

Product Usage Instructions

Upon powering up the unit, it will start in the Main Menu pointing to “Input Status”.
The Main Menu options are as follows: “Input Status”, “Control”, “Routing”, “Colours”, “UMDs”, “Audio Meters”,”Graticules”, “GPI”, and “Setup”.
To navigate through the menus, use the “<” and “>” buttons to move left or right. Press the “ENTER” button to enter a menu.
Defaults are highlighted in yellow. When an option is changed, a highlighted “S” will appear in the top right of the LCD screen and will disappear after 10 seconds when the options are saved.
You can always return to the Main Menu by pressing the “BACK” button twice.
As you move through the menus and change parameters, the changes will be instantly applied to the output signal.

Input Status:

This menu displays the current format on each SDI input channel.
When entering the “Input Status” menu, it will cycle between the status for inputs 1-4, 5-8, and 9-12.
After pressing “ENTER” once, it will display the current format on SDI Input 5-8.
After pressing “ENTER” twice, it will display the current format on SDI Input 9-12.
After pressing “ENTER” three times, it will display the current format on SDI Input 13-16.

Control:

This menu has a sub-menus and allows you to control various settings related to HDMI output.
Use the “<” and “>” buttons to navigate through the sub-menus and press “ENTER” to toggle through the available options.

The available sub-menus are as follows:

HDMI Output Type: This sub-menu allows you to select the current HDMI output type for output 1. Toggle through the available types using the “ENTER” button.

Please refer to the product manual for more detailed instructions and information.

Introduction

Thank you for purchasing the DMON-16S 16 Channel (3G/HD/SD)-SDI Multi-Viewer with HDMI and SDI outputs. The DMON-16S is a truly portable converter, which incorporates our new easy-to-use LCD and button control system. This gives you easy access to most of the amazing features that have been unavailable without a computer until now. The days of having to play with complicated dip switches or having to carry around a computer to change a simple setting are gone.

The DMON-16S features the following:

Low-cost miniature (3G/HD/SD)-SDI 1 to 16 channel Multi-Viewer or 16 to 1 input multiplexer
Custom Layouts with various standard layouts
16 Character UMD overlay per window with individual enables, custom positioning, and size
8 Channel Audio Metering overlay per window with individual enables, custom positioning, and size
Safe Action and Safe Title overlay per window with individual enables and adjustment
Centre Cross overlay per window with individual enable
Audio ID overlay
Tallies can be applied to either Tally Boxes (Default), Outside Safe Action Area or Border
Tally boxes allow for up to 4 Tallies per window with Tally Boxes (Green, Red, Blue, and Yellow)
Load and restore Custom Layouts
Fast switching between inputs using Full-Screen scaling
Selectable output format in both Full-Screen and Multi-Viewer mode
Low latency buffering for each input allowing non-synchronous inputs
Linked (3G/HD/SD)-SDI and HDMI outputs
16 x (3G/HD/SD)-SDI inputs with auto detection (26 Formats supported in total)
Supports both 3G levels A and B on the input and output
Each window is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneously
Variable aspect ratios per window
Pass-through mode allows any of the 16 inputs to be selected for output
In Pass-Through mode, the selected input is passed through to both the (3G/HD/SD)-SDI and HDMI outputs
The DMON-16S is a truly portable converter that incorporates our new easy-to-use LCD and button control system. This gives you easy access to most of the amazing features without using complicated LED/button control, dip switches or having to carry around a computer to change a simple setting.
This unit also includes:
- 32 GPI on 37-pin D-SUB connector for Dynamic Tallies and Remote Switching
- RS422/485 on 37-pin D-SUB connector for Dynamic UMD and Tallies via TSL protocol
- USB port for control and firmware updates
- Heavy-duty metal box
- Metal Thread Locking DC Power Socket
- Power Supply, HDMI Cable, and USB Cable

Main Menus

Upon power up the unit will start in the Main Menu pointing to Input Status.
The Main Menus are:

Input Status
Control
Routing
Colours
UMDs
Audio Meters
Graticules
GPI
Setup

Press the < and > buttons to move left or right through the menus.
To enter into a menu press the ENTER button.

Notes:

Defaults are highlighted in yellow.
When an option is changed, a highlighted S will appear in the top right of the LCD screen and will disappear when the options are saved after 10 seconds. Avoid powering down the unit during this time.
You can always return to the Main Menu by pressing the BACK button twice.
As you move through the menus changing parameters, they will be instantly applied to the output signal.

Input Status: (Has 4 states)
When pressing enter in the Input Status menu, will cycle between the status for inputs 1-4, 5-8, and 9-12.

Control: (Has SUB-MENUs)

Control

HDMI Output Type HDMI RGB444 2C

| Main Menu

Sub Menu

Parameter Window

---|---

When highlighted in the Main Menu, press the ENTER button to enter this sub-menu.
Press the < and > buttons to move left or right respectively through the 13 menus below and press the BACK button to go back to the Main Menu when finished.
The current value for each Sub Menu is shown in the Parameter Window.

Control / HDMI Output Type (Parameter)

This is the current HDMI output type for output 1.
When the submenu is highlighted, press ENTER to toggle through the following types:

Control / Output Select (Parameter)

This is the current source for the HDMI and SDI outputs.
When the sub-menu is highlighted, press the ENTER button to enter this sub-menu.
Press the < and > buttons to move left or right through the following sources:
1. Multi-View
2. Window 1
3. Window 2
4. Window 3
5. Window 4
6. Window 5
7. Window 6
8. Window 7
9. Window 8
10. Window 9
11. Window 10
12. Window 11
13. Window 12
14. Window 13
15. Window 14
16. Window 15
17. Window 16

Control / MV Output Format (Parameter)

This is the current output format for the Multi-Viewer.
When the sub-menu is highlighted, press the ENTER button to enter this sub-menu.
Press the < and > buttons to move left or right through the 26 video formats listed below and the BACK button to leave this SUB-MENU.

1. SD 720x487i59.94	10. HD 1920x1080psf23.98	19. HD 1280x720p30
2. SD 720x576i50	11. HD 1920x1080p30	20. HD 1280x720p29.97
3. HD 1920x1080i60	12. HD 1920x1080p29.97	21. HD 1280x720p25
4. HD 1920x1080i59.94	13. HD 1920x1080p25	22. HD 1280x720p24
5. HD 1920x1080i50	14. HD 1920x1080p24	23. HD 1280x720p23.98
6. HD 1920x1080psf30	15. HD 1920x1080p23.98	24. 3G 1920x1080p60
7. HD 1920x1080psf29.97	16. HD 1280x720p60	25. 3G 1920x1080p59.94
8. HD 1920x1080psf25	17. HD 1280x720p59.94	26. 3G 1920x1080p50
9. HD 1920x1080psf24	18. HD 1280x720p50

Note: Currently we do not support HD 1280x720p24/23.98 on the HDMI output

Control / MV Windows (Parameter)

This is the current number of windows shown on the multi-view output.
When the sub menu is highlighted, press the ENTER button to enter this sub-menu.
Press the < and > buttons to move left or right through the number of windows displayed from 1 to 16. The default Windows displayed is 16 windows.

Control / MV Windows (Parameter)

This is the current number of windows shown on the multi-view output.
When the sub menu is highlighted, press the ENTER button to enter this sub-menu.
Press the < and > buttons to move left or right through the number of windows displayed from 1 to 16. Default Windows displayed is 16 windows.
1. 100%
2. 100% with Border
3. 90%
4. 90% with Border
5. 100% with Gap
6. 100% with Border + Gap
7. 90% with Gap
90% with Border + Gap
9 to 30) Custom
31.) Top to Bottom
32.) Left to Right

Notes:

For every ‘Format’ and ‘Number of Windows’, there are 32 layouts.
E.g. for a 1920x1080i60 format showing 12 windows, there are 32 layouts tied to this output, if the number of windows is changed to 11 there are also 32 separate layouts attached to this setting.
Full-Screen Pass through will also use the selected layout for 1 window.

Control / MV Audio Source (Parameter)

This selects which window the audio is extracted from for the Multi-Viewer output.
When the sub menu is highlighted, press the ENTER button to enter this sub-menu.
Press the < and > buttons to move left or right through the following sources:
1. Window 1
2. Window 2
3. Window 3
4. Window 4
5. Window 6
6. Window 7
7. Window 8
8. Window 9
9. Window 10
10. Window 11
11. Window 12
12. Window 13
13. Window 14
14. Window 15
15. Window 16

Control / MV Reference (Parameter)

This is a reference for the Multi-Viewer.
When the submenu is highlighted, press ENTER to toggle through the following sources:
1. Window 1
2. Free-Run

Control / Pass Scaled (Parameter)

When the Output Select is changed to Windows 1 to 16, this parameter determines whether the output is scaled or passed through unchanged from the selected window. When the output is scaled, the selected layout for window 1 is used. When the submenu is highlighted, press ENTER to toggle through the following selections:
1. Yes
2. No

Control / Format Status (Parameter)

When an input is detected the DMON-16S will display the format detected in the top left of each window by default unless the location has been modified via the USB Control Panel. When the submenu is highlighted, press ENTER to toggle through the following selections:

Show for 5 sec
Show Always
Off

Control / Audio Source ID (Parameter)

The Audio Source Identification icon will appear when selecting which window the audio will be passed from to the output when in multi-viewer mode. This option toggles whether the icon is shown to indicate the window source the audio is coming from. This icon appears in front of the Format Status. When the submenu is highlighted, press ENTER to toggle through the following selections:

Show for 5 sec
Show Always
Off

Control / Apply Tally to (Parameter)
The Apply tally to parameter allows the selection of the 3 different types of tally indicators. When a tally is triggered it can be displayed as a small box on the bottom left (default position) of the inputs window or as border around the window. The Tally can also fill the outside of the safe action box. When the submenu is highlighted, press ENTER to toggle through the following selections:

Border
Out Safe Action
Tally Boxes

Control / Tally Transparency (Parameter)
The Tally transparency feature changes the transparency of the tally box/border / Outside safe Action. When the sub menu is highlighted, press ENTER to toggle through the following selections:

0%
25%
50%

Control / 3G Output is B (Parameter)

This determines if the 3G-SDI output level is B instead of A.
When the submenu is highlighted, press ENTER to toggle through the following selections:
1. Yes
2. No

Routing: (Has SUB-MENUs)

Routing

Window 1 Source **Input 1**

| Main Menu

Sub Menu

Parameter Window

---|---

When highlighted in the Main Menu, press the ENTER button to enter this sub-menu.
Press the < and > buttons to move left or right respectively through the 16 menus below and press the BACK button to go back to the Main Menu when finished.
The current value for each Sub Menu is shown in the Parameter Window.

Routing / Window 1 Source (Parameter)

This is the input source for Window 1.
When the submenu is highlighted, press the ENTER button to enter the Parameter Window.
Press the < and > buttons to move left or right through the following sources:
1. Input 1 (default for Window 1)
2. Input 2 (default for Window 2)
3. Input 3 (default for Window 3)
4. Input 4 (default for Window 4)
5. Input 5 (default for Window 5)
6. Input 6 (default for Window 6)
7. Input 7 (default for Windows 7)
8. Input 8 (default for Window 8)
9. Input 9 (default for Window 9)
10. Input 10 (default for Windows 10)
11. Input 11 (default for Window 11)
12. Input 12 (default for Window 12)
13. Input 13 (default for Window 13)
14. Input 14 (default for Window 14)
15. Input 15 (default for Window 15)
16. Input 16 (default for Window 16)

Please note that Windows 2 to 16 sources are the same as above.

Colors: (Has SUB-MENUs)

Colours Background Color Black| Main Menu

Sub Menu

Parameter Window

---|---

When highlighted in the Main Menu, press the ENTER button to enter this sub-menu.
Press the < and > buttons to move left or right respectively through the 10 menus below and press the BACK button to go back to the Main Menu when finished.
The current value for each Sub Menu is shown in the Parameter Window.

Colors / Background Colour (Parameter)

This is the background colour for the Multi-Viewer.
When the sub menu is highlighted, press the ENTER button to enter this sub-menu.
Press the < and > buttons to move left or right through the following colors:
- Black
- Blue
- Green
- Cyan
- Red
- Magenta
- Yellow
- White

Colors / Border Colour (Parameter)

This is the border color for the Multi-Viewer.
When the sub menu is highlighted, press the ENTER button to enter this sub-menu.
Press the < and > buttons to move left or right through the following colors:
1. Black
2. Blue
3. Green
4. Cyan
5. Red
6. Magenta
7. Yellow
8. White

Colors / UMD Foreground (Parameter)

This is the UMD color and transparency setting for the text.
When the sub menu is highlighted, press the ENTER button to enter this sub- menu.
Press the < and > buttons to move left or right through the following colors:

1. None	10. Black (Transparent 25%)	19. Blue (Transparent 0%)
2. Black (Transparent 50%)	11. Blue (Transparent 25%)	20. Green

Colors / UMD Background (Parameter)

This is the UMD colour and transparency setting for the background of the UMDs.
When the sub menu is highlighted, press the ENTER button to enter this sub- menu.
Press the < and > buttons to move left or right through the following colors:

1. None	10. Black (Transparent 25%)	19. Blue (Transparent 0%)
2. Black (Transparent 50%)	11. Blue (Transparent 25%)	20. Green

Colors / Format ForeGrnd (Parameter)
This is the Status Format text colour and transparency setting.
When the sub menu is highlighted, press the ENTER button to enter this sub- menu.
Press the < and > buttons to move left or right through the following colors:

1. None	10. Black (Transparent 25%)	19. Blue (Transparent 0%)
2. Black (Transparent 50%)	11. Blue (Transparent 25%)	20. Green

Colors / Format BackGrnd (Parameter)
This is the Status Format text background colour and transparency setting.
When the sub menu is highlighted, press the ENTER button to enter this sub- menu.
Press the < and > buttons to move left or right through the following colors:

1. None	10. Black (Transparent 25%)	19. Blue (Transparent 0%)
2. Black (Transparent 50%)	11. Blue (Transparent 25%)	20. Green

Colors / Outside S.Action (Parameter)
This is the Colour and transparency setting for the area outside the safe action.
When the sub menu is highlighted, press the ENTER button to enter this sub- menu.
Press the < and > buttons to move left or right through the following colors:

1. None	10. Black (Transparent 25%)	19. Blue (Transparent 0%)
2. Black (Transparent 50%)	11. Blue (Transparent 25%)	20. Green

Colors / Safe Action (Parameter)
This is the Safe Action graticule colour and transparency setting.
When the sub menu is highlighted, press the ENTER button to enter this sub- menu.
Press the < and > buttons to move left or right through the following colors:

1. None	10. Black (Transparent 25%)	19. Blue (Transparent 0%)
2. Black (Transparent 50%)	11. Blue (Transparent 25%)	20. Green

Colors / Safe Title (Parameter)
This is the Safe Title graticule colour and transparency setting.
When the sub menu is highlighted, press the ENTER button to enter this sub- menu.
Press the < and > buttons to move left or right through the following colors:

1. None	10. Black (Transparent 25%)	19. Blue (Transparent 0%)
2. Black (Transparent 50%)	11. Blue (Transparent 25%)	20. Green

Colors / Centre Cross (Parameter)
This is the Centre Cross colour and transparency setting.
When the sub menu is highlighted, press the ENTER button to enter this sub- menu.
Press the < and > buttons to move left or right through the following colors:

1. None	10. Black (Transparent 25%)	19. Blue (Transparent 0%)
2. Black (Transparent 50%)	11. Blue (Transparent 25%)	20. Green

UMDs: (Has SUB-MENUs)

UMDs

All On

| Main Menu

Sub Menu

Parameter Window

---|---

When highlighted in the Main Menu, press the ENTER button to enter this sub- menu.
Press the < and > buttons to move left or right respectively through the 3 menus below and press the BACK button to go back to the Main Menu when finished.
The current value for each Sub Menu is shown in the Parameter Window unless it is an action Sub Menu.

UMDs / All On (Action)
Pressing ENTER when this submenu is selected will turn all UMD overlays on.
UMDs / All Off (Action)
Pressing ENTER when this submenu is selected will turn all UMD overlays off.
UMDs / UMD Justify (Parameter)
This parameter determines whether the text inside the 16-character window is centered, left or right justified.

When the submenu is highlighted, press ENTER to toggle through the following options:

Centre
Left
Right

Audio Meters: (Has SUB-MENUs)

Audio Meters

All On

| Main Menu

Sub Menu

Parameter Window

---|---

When highlighted in the Main Menu, press the ENTER button to enter this sub-menu.
Press the < and > buttons to move left or right respectively through the 11 menus below and press the BACK button to go back to the Main Menu when finished.
The current value for each Sub Menu is shown in the Parameter Window.

Audio Meters / All On (Action)
Pressing ENTER when this submenu is selected will turn all Audio Meter overlays on.

Audio Meters / All Off (Action)
Pressing ENTER when this submenu is selected will turn all Audio Meter overlays off.

Audio Meter / Combination (Parameter)

This is the combination of either bar or float meters.
When the submenu is highlighted, press ENTER to toggle through the following selections:
1. None
2. Bar Only
3. Float Only
4. Bar and Float

Audio Meter / Transparency (Parameter)

This is the transparency level of the audio meter overlays.

When the submenu is highlighted, press ENTER to toggle through the following selections:

0%
25%
50%

Audio Meter / Show Scale (Parameter)
This indicates if the scale is shown on the audio meter overlays.
When the submenu is highlighted, press ENTER to toggle through the following selections:

Off
On

Audio Meter / Show Scale (Parameter)
This indicates if the scale is shown on the audio meter overlays.
When the submenu is highlighted, press ENTER to toggle through the following selections:

Off
On

Audio Meter / Bar Ballistics (Parameter)
This is the current ballistics applied to the bar audio meter.
When the submenu is highlighted, press ENTER to toggle through the following selections:

VU
IEC1
IEC2

Audio Meter / Float Ballistics (Parameter)

This is the current ballistics applied to the float audio meter.
When the submenu is highlighted, press ENTER to toggle through the following selections:
1. VU
2. IEC1
3. IEC2

Audio Meter / Float Ballistics (Parameter)

This is the current ballistics applied to the float audio meter.
When the submenu is highlighted, press ENTER to toggle through the following selections:
1. VU
2. IEC1
3. IEC2

Audio Meter / Float Ballistics (Parameter)

This is the current ballistics applied to the float audio meter.
When the submenu is highlighted, press ENTER to toggle through the following selections:
1. VU
2. IEC1
3. IEC2

Audio Meter / Green Start (Has SUB-MENU with parameter)

This is the starting level for the green range on the audio meter. The default value is -20dBFS.
When the sub-menu is highlighted, press the ENTER button to enter this sub-menu.
Press the < and > buttons to increase and decrease the level from 0 to -100dBFS respectively.
Press the BACK button to leave this SUB-MENU.

Graticules: (Has SUB-MENUs)

Graticules S.Action All On| Main Menu

Sub Menu

Parameter Window

---|---

When highlighted in the Main Menu, press the ENTER button to enter this sub- menu.
Press the < and > buttons to move left or right respectively through the 9 menus below and press the BACK button to go back to the Main Menu when finished.
The current value for each Sub Menu is shown in the Parameter Window, unless it is an action Sub Menu.

Graticules / S.Action All On (Action)
Pressing ENTER when this submenu is selected will turn all Safe Action Graticules overlays on.
Graticules / S.Title All On (Action)
Pressing ENTER when this submenu is selected will turn all Safe Title Graticules overlays on.
Graticules / C.Cross All On (Action)
Pressing ENTER when this submenu is selected will turn all Centre Cross overlays on.
Graticules / S.Action All Off (Action)
Pressing ENTER when this submenu is selected will turn all Safe Action Graticules overlays off.
Graticules / S.Title All Off (Action)
Pressing ENTER when this submenu is selected will turn all Safe Title Graticules overlays off.
Graticules / C.Cross All Off (Action)
Pressing ENTER when this submenu is selected will turn all Centre Cross overlays off.
Graticules / All Anamorphic (Action)
Pressing ENTER when this submenu is selected will set all Safe Action and Safe Tile Graticules to anamorphic.
Graticules / All 16:9 LB (Action)
Pressing ENTER when this submenu is selected will set all Safe Action and Safe Tile Graticules to 16:9 Letter Box on a 4:3 Raster. For use with 16:9 and HD/SD inputs being displayed on a 4:3 SD output.
Graticules / All 4:3 PB (Action)
Pressing ENTER when this submenu is selected will set all Safe Action and Safe Tile Graticules to 4:3 Letter Box on a 16:9 Raster. For use with 4:3 SD inputs being displayed on a 16:9 HD/SD output.

GPI: (Has SUB-MENUs)

GPI

GPI Mode 00

| Main Menu

Sub Menu

Parameter Window

---|---

When highlighted in the Main Menu, press the ENTER button to enter this sub- menu.
When the submenu is highlighted, press ENTER to toggle through the Modes and press the BACK button to go back to the Main Menu when finished.
The current value for each Sub Menu is shown in the Parameter Window.

GPI Mode = 00:

PIN 1 = Ground	PIN 14 = Window 7 Tally Red	PIN 27 = Window 12 Tally Green
PIN 2 = RS485+	PIN 15 = Window 9 Tally Red	PIN 28 = Window 14 Tally Green
PIN 3 = Window 1 Tally Green	PIN 16 = Window 11 Tally Red	PIN 29 = Window 16

GPI Mode = 01:

PIN 1 = Ground	PIN 14 = Window 7 Tally Red	PIN 27 = Window 12 Tally Green
PIN 2 = RS485+	PIN 15 = Window 9 Tally Red	PIN 28 = Window 14 Tally Green
PIN 3 = Window 1 Tally Green	PIN 16 = Window 11 Tally Red	PIN 29 = Window 16

GPI Mode = 02:

PIN 1 = Ground	PIN 14 = Window 9 Select	PIN 27 = Window 12 Tally Green
PIN 2 = RS485+	PIN 15 = Window 11 Select	PIN 28 = Window 14 Tally Green
PIN 3 = Window 1 Tally Green	PIN 16 = Window 13 Select	PIN 29 = Window 2

Setup: (Has SUB-MENUs)

Setup

LOAD DEFAULTS

| Main Menu

Sub Menu

Parameter Window

---|---

When highlighted in the Main Menu, press the ENTER button to enter this sub- menu.
Press the < and > buttons to move left or right respectively through the 6 menus below and press the BACK button to go back to the Main Menu when finished.
The current value for each Sub Menu is shown in the Parameter Window, unless it is an action Sub Menu.

SETUP / LOAD DEFAULTS (Action)
When highlighted in the Menu Window, press the ENTER button to load the default settings. The device will be reset to the Main Menu Input Status.
SETUP / LCD OFF TIME (Parameter)

This is the time taken for the LCD light to turn off after the last button press.
When the sub menu is highlighted, press ENTER to toggle through the following times:
1. 5 seconds
2. 15 seconds
3. 30 seconds
4. 1 minute
5. 5 minutes
6. 10 minutes
7. 30 minutes
8. Never

SETUP / BACK2STATUS TIME (Parameter)

This is the time before the main menu is returned to Input Status after the last button press.
When the submenu is highlighted, press ENTER to toggle through the following times:
1. 5 seconds
2. 15 seconds
3. 30 seconds
4. 1 minute
5. 5 minutes
6. 10 minutes
7. 30 minutes
8. Never

SETUP / AUTO SAVE (Parameter)

This parameter will determine if any changes will be saved to memory when changes are made.
When the submenu is highlighted, press ENTER to toggle through the following selections:
1. Yes
2. No

SETUP / Demo Cycle (Parameter)

The Demo cycle setting is used for cycling through multiple layouts, windows or inputs on a time delay. When the sub-menu is highlighted, press the ENTER button to enter this sub-menu.
Press the < and > buttons to move left or right through the following cycle types:
1. None
2. Output Select
3. MV Windows
4. MV Layouts

Note: The parameter will only be updated when leaving this sub-menu.
SETUP / Demo Cycle Time (Parameter)

The Demo Cycle Time determines the amount of time to elapse before cycling to the next item. When the sub-menu is highlighted, press the ENTER button to enter this sub-menu.
Press the < and > buttons to move left or right through the time until the unit moves to the next item in the cycle.
The default time is 10 Seconds, Maximum time is 256 Seconds

Note: The parameter will only be updated when leaving this sub-menu.

SERVICE WARRANTY

Decimator Design warrants that this product will be free from defects in materials and workmanship for a period of 36 months from the date of purchase. If this product proves to be defective within this warranty period, Decimator Design, at its discretion, will either repair the defective product without charge for parts and labor, or will provide a replacement product in exchange for the defective product.
In order to service under this warranty, you the Customer, must notify Decimator Design of the defect before the expiration of the warranty period and make suitable arrangements for the performance of service. The Customer shall be responsible for packaging and shipping the defective product to a designated service center nominated by Decimator Design, with shipping charges prepaid. Decimator Design shall pay for the return of the product to the Customer if the shipment is to a location within the country in which the Decimator Design service center is located. The Customer shall be responsible for paying all shipping charges, insurance, duties, taxes, and any other charges for products returned to any other location.
This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate maintenance and care. Decimator Design shall not be obligated to furnish service under this warranty a) to repair damage resulting from attempts by personnel other than Decimator Design representatives to install, repair or service the product, b) to repair damage resulting from improper use or connection to incompatible equipment, c) to repair any damage or malfunction caused by the use of non-Decimator Design parts or supplies, or d) to service a product that has been modified or integrated with other products when the effect of such a modification or integration increases the time of difficulty of servicing the product.