Cambridge Casual IT-170277T Teak Coffee Table Installation Guide
- June 20, 2024
- CAMBRIDGE CASUAL
Table of Contents
Cambridge Casual IT-170277T Teak Coffee Table Installation Guide
Please email us at info@cambridge-casual.com for assembly tips, report damage,
or request parts. For faster response, please write down item number, code for
missing parts, attach the purchase receipt and picture of damaged parts.
Toll free number : 1-888-287-4275
from 9:00am to 5:00pm CST (Monday to Friday)
GENERAL INFORMATION & TIPS
- Please read the assembly instructions prior to assembling the table.
- To avoid damage, assemble the table on a non-abrasive surface such as carpet.
- Make sure all nuts tightly fastened before the table Is used.
- This table is not for commercial use,
Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening nuts.
-
A Philips screwdriver Is necessary for assembly. It’s not included in hardware list.
-
Wrench Is necessary for assembly. It’s included in hardware ist.
PARTS AND HARDWARE LIST
A. Table top | B. Leg frame | C. Table support | D. Washer |
---|---|---|---|
QTY: 1 pc | QTY: 4 pcs | QTY: 8 pcs | QTY: 4 pcs + 1 |
E. Spring washer | F. Nut | G. 1 1/4″ Screw | |
QTY: 4 pcs +1 | QTY: 4 pcs +1 | QTY: 16 pcs + 1 |
STEP 1
- Attach the leg frames (B) into each corner of table top (A).
- Assemble the washers (D), Spring washers (E) and nuts (F) to leg frames (B). Tighten the nut using wrench.
STEP 2
- Next, attach the table support (C) into each corner of leg frames and secure using 1.1/4″ screws (G) as diagram shown.
- Make sure all parts are correctly connected and tighten all screws using screwdriver,
CARE MAINTENANCE
Our collections are meticulously crafted by artisane using sustainably
harvested wood, cultivated under rigorous govemmental regulations. This
approach not only promotes the sustainability of future wood harvests but also
guarantees adherence to legal trade practices.
Our collections are designed to withstand the elements. However, as even the
best-made fumiture Is not Indestructible, normal wear and tear will reflect
use and care. To keep your pleces looking their best, please follow this
helpful gulde of cleaning and maintenance recommendations.
GENERAL OUTDOOR CARE
- Regular cleaning Is Important to keep your places looking their best
- We strongly recommend using fumiture covers ar maving Into covered storage when Items are not in use during heavy rain, winter, and other perfods of Inclement weather.
- Fumiture, and cushions should be clean and dry before covering or storing.
- Wet cushlons should be removed from the frame and alr dried to prevent mold and mildew.
- Do not store furniture in areas that have central heating or cooling vents to prevent excessive drying of the wood. This will decrease the fumiture’s longevity.
- Avold letting liquids stand on the surface of furniture and cushlons.
- Do not put hot (lems directly on fumiture surface.
- Do not write on furniture without a padded barter to protect the surface.
- Do not leave your fumiture In puddles of water or on wet ground
UNFINISH NATURAL/FINELY SANDED TEAK
Characteristic
- Each piece may exhibit unique graining and color variations due to the organic nature of the teak.
- The inherent characteristics of natural teak, such as small splits, knots, joint lines, and other features, contribute to the character of the piece without affecting its quality or performance.
- Natural teak will gracefully develop a silver-gray patina as it weathers. Teak sealer or teak oil may be applied, if you prefer to maintain the original warm honey brown.
- Teak expands and contracts In response to shifts in climate. This natural phenomenon may lead to hairline cracks in assembly joints or the wood grain itself. This does not compromise the structural integrity of the frame’s construction.
- Despite its innate resistance to decay, surface mildew may form. It’s important to note that such mildew does not impact the wood’s durability or lifespan and can be removed through simple cleaning.
Care & Maintenance.
You can clean your teak fumiture using warm water and mild dish soap. Gently
scrub teak surfaces in the same direction as their grain. Rinse thoroughly
with water. Pat dry with a towel and allow any remaining moisture to air dry.
You may also use a mixture of a cup of chlorine bleach, a cup of laundry
detergent and a gallon of water to clean your teak pleces. Apply using a non-
metallic, soft-bristle brush. Allow to sit on the furniture for approximately
5-10 minutes, or longer for more stubbom stalns. Thoroughly rinse the cleaning
solution with clean water (spray It with a garden hose).
Always begin with a mild or more diluted – cleaning solution. If that does not
work, try a stronger concentration or a store-bought teak cleaner.
To remove remaining stains, lightly sand the affected areas with fine 120-grit
sandpaper until the stain disappears.
WEATHERED TEAK
Our weathered teak finish is hand applied to our teak frames using a wire
brush to distress the wood before applying a multilayered painted finish to
create a weathered appearance for our teak furniture.
Similar to all painted finishes, our weathered teak finish will fade and wear
when exposed to outdoor elements. As the finish gradually wears away, the
underlying natural teak wood will become exposed and start to turn grey. The
speed at which this weathering occurs can differ based on factors such as
climate, exposure level, and commitment to care and maintenance. This
weathering process is accelerated when fumiture is left untreated or
uncovered. To preserve your weathered teak furniture, particularly during
extreme weather or winter seasons, it’s recommended to either move it to
covered storage or cover it with a fumiture cover.
SPA COLLECTION TEAK
Water and stain guard is applied to our bath collection teak, This finished
teak may be maintained with solvent-based polyurethane protective coating
every six (6) months, or as suggested by the protective coating manufacturers.
For everyday maintenance, you may clean with mild detergent using clean cloth.
Please do not expose and/or use any chemical solvent.
PAINTED HARDWOOD
We recommend applying water-based mild detergent for wood using clean cloth
every six (6) months. Please do not expose and/or use any chemical solvent.
Color/finish can fade over time when continuously exposed to elements like
sunlight and rain. Store Indoors or use a furniture cover during extreme
weather or winter months to protect your furniture.
CUSHIONS
Our fabrics are designed to be breathable. They are water resistant but not
waterproof. It is recommended that you remove them from furniture and store
them in a dry place when not in use or during inclement weather. The cushion
and cushion cover shall be removed and air dried if it is soaked after heavy
rain to avoid the potential moki issue. When drying, flip cushions on their
sides with the zipper facing down and unzipped cushion covers to ensure that
all water drains out.
The best way to keep your fabrics looking good Is to clean them. It Is
recommended to clean off dust and dirt perlodically, wipe spills as soon as
they occur, and spot clean soon after stains occur. Removable cushion covers
may be machine-washed in cold water with mild laundry soap and air dried.
Cushions and pillows may show signs of wear and lose shape after use. To help
prevent this, periodically rotate cushions and pillows insert to distribute
wear.
SYNTHETIC RATTAN, WOVEN POLYROPE, & TEXTILENE
Synthetic rattan, woven polyrope, and textilene should be dusted periodically
with a soft, dry cloth to remove dirt and debris. Loose dirt can also be
removed using a non-metallic, soft bristle brush. For spot-cleaning, you can
spray off debris using a hose and then dry the surface with a soft cloth,
For a more thorough cleaning, prepare a mixture of mild soap with water and
clean using a non-metallic, soft bristle brush, Do not use abrasive cleaners.
Rinse thoroughly and dry with a soft cloth
We believe that this care maintenance will be a rewarding experience, as well-
maintained furniture may last many years to come.
1 Year Limited Warranty
This warranty is a limited warranty. Regular care and maintenance are required to maintain the warranty. Warranty is to the original purchaser when Items are purchased from one of our authorized retailers and is not transferable. If a product fails and is under the terms of our limited warranty, the Item will be replaced with a small fee when applicable. In the case of discontinued models, an Item of similar quality and style will be offered to the customer.
-
1 Year Limited Frame Warranty:
Wood frames are warranted to be free from structural defects (le., broken frame) In materlal and workmanship. Wood frames require user maintenance and changes in the color of wood are normal and should be expected to occur over time as the natural material ages. Therefore, natural fading and changes in wood frames is not covered by this warranty. Components such as chair feet are meant to wear and tear, so they will not be considered as part of the frame. -
Finish, when applicable:
The finish is warranted against peeling, cracking, or blistering for a period of 1 year, provided the unit has not been scratched or abraded. Scratches and dents resulting from normal wear and tear are not covered. -
Fabric
Fabrics and cushions are warranted to be free from workmanship or material defects, which Includes fallures In stitching, zippers, sling ralls, cording, buttons, cushlon foam, or other areas of workmanship. The fabric and cushion will not be warranted if deterioration, discoloration, fading, etc., Is due to exposure of chemicals, cleaning products, sun lotions, oll spills, Improper maintenance process, or extreme heat.
Warranty Exclusions: Furniture used for commercial, contractor or any non- residential purposes | clearance items, display models, or items purchased “as is” | failure caused by unreasonable or abusive use, freight damage, acts of nature, vandalism, fire, lack of proper care and maintenance, or Improper assembly | exposure to severe weather includes, but not limited to, snowstorm, hail, heavy rainfall, flooding, hurricane, and extreme heat | accidental damage, repair, or modifications by customer | straps and fabric against fading or discoloration from improper and/or accidental exposure to elements, oil spills, fluids or chemicals | hardware against corrosion or rusting | buckling or splitting of tubing resulting from exposure to water and freezing temperatures. Further excluded: normal wear and tear loss of use or time inconvenience, money, travel, packaging or any other consequential or Incidental damages. In no event shall the manufacturer’s responsibility exceed the value of the product
The warranty starts on the date of purchasing unless otherwise noted.
However, we may consider for special circumstance.
For quality control purposes and verification, we need documents In support of
your claim:
-
Packing slip/Invoice
Additional documents (Photos or video) of damaged/ defected/missing part -
Item number and part code (can be found on assembly Instruction)
Please include the above-mentioned documents as your claim WILL NOT BE
PROCESSED until properly supported. Retain all damaged goods until the clalm
Is concluded.
The terms of this warranty are subject to change without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>