Russell Hobbs RHOFR5001 (B) 1500W Oil Filled Radiator Instruction Manual

Oil Filled Radiator
Model Number:
RHOFR5001 (B) 1500W
RHOFR5002 (B) 2000W
220-240V AC 50Hz

This product is only suitable for well-insulated spaces or occasional use
For Customer Services & Spare Parts please call 0345 209 7461Or visit us at mda.russellhobbs.com
PLEASE RETAIN FOR FUTURE REFERENCE

UNPACKING YOUR APPLIANCE

Before you use your appliance

1. Remove all the packaging.
2. Check the appliance after unpacking for any visual damage such as:

•  Misaligned or damaged parts
• Damage to the controls
• Damage to the plug or cable
• If you can see any damage do not use the appliance

The appliance should not be used if it has been dropped or there are any visible signs of damage.
This appliance must be placed on a solid stable surface, away from walls, cabinets, furniture, curtains, etc. Position the appliance with a minimum spacing of 100cm from the top and sides, front and back.

SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be observed, including the following:

• Read all instructions.

• Check that the mains voltage corresponds with the rating on the appliance.

• The appliance must not be left unattended while it is connected to the main supply.

• Do not touch hot surfaces. Use the handle or the controls.

• To protect against electrical shock do not immerse the cord, plug, or appliance in water or other liquid. Do not operate with wet hands.

• Do not let the cord hang over the edge of a worktop, table, etc. or touch hot surfaces.

• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in
  any manner. The supply cord can not be replaced. If the cord is damaged the appliance should be scrapped.

• The use of accessory attachments not recommended by the appliance manufacturer may cause fire, electric shock, or injury.

• This appliance must not be immersed in any liquid

• To disconnect, remove the plug from the main outlet. Do not pull the plug out by the cord.

• Warning: In order to avoid overheating, do not cover the heater.

• Never remove parts from the appliance, such as the feet, screws, and so on.

• Never use the appliance near a bath, shower, or swimming pool.

• Never place flammable objects or clothing on top of the appliance.

• Allow a 100cm safe area around the appliance on the top and sides, front and back.

• Never use the appliance in a room with explosive gas such as petrol, or while using any kinds of flammable glues, sprays, or solvents.

• Prevent overheating of the appliance by keeping the air inlets and outlets clean and free of anything that may cause blockage. Check all inlets and outlets regularly for accumulated dust. DO NOT COVER.

• Do not place any part of your body near the air inlet, outlet, or fins, to avoid personal injury, electric shock, or fire.

• If overheating should occur, the built-in overheating safety device will shut the appliance off. Note, the appliance will turn on again when it has cooled down sufficiently.

• Do not insert any foreign objects into the ventilation.

• Keep all ventilation clear of any draped fabric or curtains.

• The appliance must not be located immediately below a mains socket. Do not use the appliance with a programmer, timer, or any other device that switches the appliance on automatically. A fire risk exists if the appliance is covered or positioned incorrectly.

• Caution: Some parts of this product can become very hot and cause burns. Particular attention must be given when children or vulnerable people are present.

• Do not operate this appliance for anything other than its intended use.

• This appliance is not intended for commercial use.

• This product is intended for household use only. Do not use outdoors.

• This product is only intended for heating.

• Warning: It is hazardous for anyone other than a competent person to carry out any service or repair operation which involves the removal of a cover that gives protection against exposure to electrical parts.

• This heater is filled with a precise quantity of special oil. Repairs requiring the opening of the oil container are only to be made by the manufacturer or his service agent who should be contacted if there is an oil leak.

• When scrapping the heater, follow the regulations concerning the disposal of oil.

• Warning: Children should not use this appliance. Close supervision is necessary when any appliances are used near children.

• Warning: Children of less than 3 years should be kept away unless continuously supervised.

• Warning: Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

• Warning: Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.

• Warning: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to make sure that they do not play with or use the appliance.

• Warning: In order to avoid overheating, do not cover the heater

• Warning: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to make sure that they do not play with or use the appliance.

• Warning – Do not touch hot surfaces, do not block openings, or cover appliances.

FEATURE DIAGRAM

1. Handle
2. Fins
3. Castors/Wheels
4. Power/heat setting switches| 5. Thermostat control
6. Thermostat indicator light
7. Power cable storage
---|---

For Customer Services & Spare Parts please call 0345 209 7461 Or visit us at mda.russellhobbs.com

BASE ASSEMBLY

1. Attach the castors to the base plate and secure using the 4 x nuts supplied.
2. Then turn the heater upside down and position it between the end fins.
3. Attach the base plates by hooking the 2 x U-bolts through the fins and securing them with the 4 x wing nuts.
4. Once secure, turn the radiator round so that it is sitting on the wheels.

USING YOUR OIL FILLED RADIATOR

1. Before connecting your appliance to the main socket, position the appliance upright on the floor, at least 90cm away from the wall, away from curtains, furniture, or wall coverings.

2. Insert the mains plug into a suitable 13 amp mains socket.

3. Turn the Power Control to the ‘I’, ‘II’ or ‘III’ position. The appliance has 3 power settings.
   Power Control Position| RHOFR5001| RHOFR5002
   ---|---|---
   OFF  Power OFF| Off| Off
   I        Low heat ON| 600W| 800W
   II       Medium heat ON| 900W| 1.2kW
   III      High heat ON| 1.5kW| 2.0kW

4. Turn the Thermostat Control to the desired position. It is recommended to select the highest position to preheat the appliance. It will take 5 -10 minutes for the appliance to fully heat up, the time taken for the heater to heat the room it is located in will be dependent on the size of the room and the ambient temperature of the room. The indicator light will illuminate when the unit is working, but the light will cycle on and off when the thermostat control is set on a low setting and the heater is then maintaining the room temperature. ote: This appliance will not operate if the thermostat has been set too low.
   Note: If the thermostat dial is set toward the maximum setting and the power control is set to off then the indicator light will stay illuminated. No heat will be emitted as the power to the heating elements is off.
   Note: This appliance will not operate if is not placed on a stable surface.

5. When the room reaches the desired temperature, the radiator will cycle off and turn on again when the temperature drops.

6. If the room temperature falls below the desired temperature, the heating elements will turn on again until the room temperature reaches the desired temperature.

Note: This radiator is oil-filled, and will cool down slowly after the power is shut off. Allow the radiator heater to cool prior to any movement, the built-in carry handle should be used for easy movement.
Safety Protective Devices – The appliance is fitted with an overheat and tip-over protection system.

1. Overheat protection – the power to the heating elements will automatically cut off if the temperature of the heating
   elements exceeds a certain limit. In the event of overheating, the heater will stop operating. Once the appliance has completely cooled the appliance will then resume operating as normal.

2. Tip-Over Switch – The unit needs to be placed on a flat, firm, and stable surface to ensure that the appliance contacts the floor firmly and internal tip-over switches are levels. If in the event that the unit tips over or is placed on an uneven or super very surface the appliance will not operate.

POWER CABLE STORAGE
When the appliance is not in use wrap the power cord around the storage hook to keep your appliance tidy and easy to store away.
The power cord must be completely unwrapped when plugged into the plug socket or in use.

CLEANING AND CARE

WARNING: Electrical Shock Hazard.
Before you clean the appliance, disconnect the mains plug from the wall socket.

• Allow the appliance to cool down completely before cleaning.
• Do not immerse the cord, plug, or appliance in any liquid or allow moisture to come into contact with electrical parts.
• Clean the outer surface using a moist cloth and wipe over with a dry, soft cloth.
• Do not use harsh detergents, abrasives, or spray-on cleaners.
• Don’t allow water to seep into the openings or come into contact with electrical connections.
• Allow sufficient drying time before operating again.
• Clean the air inlets and outlets regularly with a vacuum cleaner using the brush attachment (with regular use, at least twice a year).
• When the appliance is not in use. We recommend that the heater is re-packed in its original packaging and stored in a cool, dry place.

PROBLEM-SOLVING

My appliance does not work when I turn it on:

1. Check that your appliance is plugged in and the power is turned on at the mains socket.

2. Try another main socket.

3. Check the appliance is in an upright position.

4. Check that the thermostat setting has not been set too low.

5. Check if the Overheat protection has operated by leaving the appliance plugged un and giving it time to cool down.
   The heater should start to resume operating normally.

6. If the appliance still doesn’t work, do not try to repair it yourself.

If your appliance power is automatically cut off, follow the step below:

1. Unplug your appliance from the main socket and allow it to completely cool down.
2. Inspect your appliance. Clean the air inlet and air outlet with a vacuum cleaner if necessary. If there are any signs of physical damage (e.g. melting, or burning of the case), do not attempt to use the appliance. Please leave all maintenance work to qualified personnel.
3. Plugin the appliance and switch it on again. If it cuts off again, move the appliance to a better-ventilated location.

GUARANTEE AND CUSTOMER SERVICES

At Russell Hobbs, we take all our customer feedback seriously.
Feel free to contact our Customer Service Team, on 0345 209 7461, who will be more than happy to assist you.
This product is guaranteed for 12 months from the date of the original purchase. If any defect arises due to faulty materials or workmanship, the faulty product must be returned to the place of purchase.
Refund or replacement is at the discretion of the retailer.
The following conditions apply:

• The product must be returned to the retailer with the original proof of purchase.

• The product must be installed and used in accordance with the instructions contained in this instruction guide and any other
  instructions for use that are supplied.

• It must be used for domestic purposes only and for its intended use.

• This warranty does not cover wear and tear, damage, misuse, or consumable parts.

This does not affect your statutory rights.

SPARE PARTS

To check the availability of the following spare parts, simply contact our friendly Customer Services team using the detail provided at the bottom of this page.
Castors U-boltsBase Plate

CONNECTION TO THE MAINS SUPPLY

This appliance is designed to operate from the main supply of 220-240V~50Hz/60Hz.
Check that the voltage marked on the product corresponds with your supply voltage.
How to change the fuse

1. Slot the end of a screwdriver into the recess in the fuse holder of the plug.
2. Pull the fuse holder upwards until free of the plug and slide the fuse out.
3. Replace the fuse and replace the fuse holder, pushing down until locked into place.

Important: Only ever use a 13 amp fuse.

SPECIFICATION

only
Nominal heat output| nom| 0.7311| kW| | manual heat charge control, with integrated thermostat| NA
Minimum heat output (indicative)| `min| 0| kW| | manual heat charge control with room and/or outdoor temperature feedback| NA
Maximum continuous heat output| max,c| 0.7311| kW| | electronic heat charge control with room and/or outdoor temperature feedback| NA
| | | | | fan assisted heat output| NA
Auxiliary electricity consumption| | Type of heat output/room temperature control
At nominal heat output| max| N/A| kW| | single stage heat output and no room temperature control| No
At minimum heat output| min| N/A| kW| | Two or more manual stages, no room temperature control| No
In standby mode| SB| N/A| kW| | with mechanic thermostat room temperature control| Yes
| | | | | with electronic room temperature control| No
| | | | | electronic room temperature control plus day timer| No
| | | | | electronic room temperature control plus week timer| No
| | | | | Other control options (multiple selections possible)
| | | | | room temperature control, with presence detection| No
| | | | | room temperature control, with open window detection| No
| | | | | with distance control option| No
| | | | | with adaptive start control| No
| | | | | with working time limitation| No
| | | | | with black bulb sensor| No
Contact details| G25 Limited, Wigan, WN2 4AY
G2S (NI) Ltd, Belfast, BT5 5AD
Model number| RHOFR5002 (B)
---|---
Item| Symbol| Value| Unit| | Item| Unit
Heat output| | Type of heat input, for electric sto age local space heaters only
Nominal heatoutput| nom| 0.8731| kW| | manual heat charge control, with integrated thermostat| NA
Minimum heatoutput (indicative)| min| 0| kW| | manual heat charge control with room and/or outdoor temperature feedback| NA
Maximum continuous heat output| max,c| 0.8731| kW| | electronic heat charge control with room and/or outdoor temperature feedback| NA
| | | | | fan assisted heat output| NA
Auxiliary electricity consumption| | Type of heat output/room temperature control
At nominal heat output| max| N/A| kW| | single-stage heat output and no room temperature control| No
At minimum heat output| min| N/A| kW| | Two or more manual stages, no room temperature control| No
In standby mode| SB| N/A| kW| | with mechanic thermostat room temperature control| Yes
| | | | | with electronic room temperature control| No
| | | | | electronic room temperature control plus day timer No|
| | | | | electronic room temperature control plus week timer| No
| | | | | Other control options (multiple selections possible)
| | | | | room temperature control, with presence detection No|
| | | | | room temperature control, with open window detection| No
| | | | | with distance control option| No
| | | | | with adaptive start control| No
| | | | | with working time limitation| No
| | | | | with black bulb sensor| No
Contact details| G2S Limited, Wigan, WN2 4AY
G2S (NI) Ltd, Belfast, BT5 5AD

NOTES

Russell Hobbs is a registered trademark used under license from Spectrum Brands (UK) Ltd. Made under license by G2S Limited, Wigan, WN2 4AY/G2S
(NI) Ltd, Belfast, BT5 5AD.
Russell Hobbs Support: call 0345 209 7461 or visit: mda.russellhobbs.com

The ‘wheelie bin’ symbol is known as the ‘Crossed-out wheelie bin Symbol’. When this symbol is marked on a product/battery, it means that the product/batteries should not be disposed of with your general household waste. Only discard electrical/electronic/battery items in separate collection schemes, which cater for the recovery and recycling of materials contained within. Your co-operation is vital to ensure the success of these schemes and for the protection of the environment. For your nearest disposal facility, visit www.recycle-more.co.uk or ask in-store for details.
SEDEX – Connecting businesses and their global suppliers to share ethical
data and enabling improvement in ethical performance. Visit www.sedex.org.uk for further information.
We reserve the right, due to possible changes to the design, to alter the instruction manual without prior notice.
Revision 2.2

Documents / Resources

| Russell Hobbs RHOFR5001 (B) 1500W Oil Filled Radiator [pdf] Instruction Manual
RHOFR5001 B 1500W, RHOFR5002 B 2000W, Oil Filled Radiator
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>