DrayTek Vigor2862 VDSL2 Router Instructions
- June 12, 2024
- DrayTek
Table of Contents
DrayTek Vigor2862 VDSL2 Router
Release Note for Vigor2862 Series
| Firmware Version: | 3.9.9 |
|---|---|
| Release Type: | Normal |
| Applied Models: | Vigor2862 / Vigor2862n / Vigor2862ac / Vigor2862Vac / |
Vigor2862L / Vigor2862Ln / Vigor2862Lac
Vigor2862 series is a VDSL2 router with a multi-subnet for secure and efficient workgroup management. It integrates IP layer QoS, NAT session/bandwidth management to help users control works well with large bandwidth. Besides, “n” and “ac” series have built-in Wireless LAN for wireless connection.
Vigor2862 series is a VDSL2 router with a multi-subnet for secure and efficient workgroup management. It integrates IP layer QoS, NAT session/bandwidth management to help users control works well with large bandwidth. Besides, “n” and “ac” series have built-in Wireless LAN for wireless connection.
New Features
- Support Cyren Zero-Day WCF.
Improvement
- Improved: Add new Annex B modem code 779B07 in the MDM4 firmware to solve a VDSL sync issue with German ISP M-Net.
- Corrected: An issue that the Secondary NTP server box was cleared after editing Daylight Saving.
- Corrected: An IPsec IKE buffer leakage issue when receiving retransmitted phase2 PFS negotiation.
- Corrected: An issue with system uptime display for switch status on Central Management >> Switch >> Status.
- Corrected: An issue with the system not working if entering more than a certain number (e.g., 500) characters for the hotspot web portal terms and conditions.
Version and Modem Code
- “Vigor2862_v3.9.9_STD_en.zip” provides Annex A modem code 776d07_772801 and 774307_771801, and Annex B modem code 773306_771502 and 773307_771C02.
- “Vigor2862_v3.9.9_MDM1_en.zip” provides Annex A modem code 779517_773F01 and 77B507_775401, Annex B modem code 779B06_774F02 and 779B07_774C12. Recommended for Australia.
- “Vigor2862_v3.9.9_MDM2_en.zip” provides Annex A modem code 77B506_775401, 778C06_773F01,and Annex B modem code 779906_774402, 779B06_774C02.
- “Vigor2862_v3.9.9_MDM3_en.zip” provides Annex A modem code 77C717_775A11, and Annex B modem code 77C717_775A12.
- “Vigor2862_v3.9.9_MDM4_en.zip” provides Annex A modem code 776d07_772801, 774307_771801, and Annex B modem code 779B07_774C12.
Known Issue
- None.
Notes
- Vigor router supports the mesh network; however, it is not guaranteed to fit your environment. It might not be available and restricted due to the physical connection, actual environment, signal strength, and excessive interference.
- Remove the simplified APM mechanism, and restore it to the full version.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>