Kenmore KS-B6000-TH 32 Inch Smart Charcoal Grill User Manual

Kenmore KS-B6000-TH 32 Inch Smart Charcoal Grill

Product Information

1-888-287-0735

Product Usage Instructions

Safety Guidelines:

• DO NOT mix old and new batteries. DO NOT mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni0mh, etc.) batteries.
• Never dispose of batteries in an open fire. Always dispose of batteries in accordance with the local laws.
• Avoid placing the Smart Thermometer on hot surfaces.
• When not in use, store the Smart Thermometer and Smart Gas Tank Sensor in a dry place at room temperature.
• DO NOT put the probes directly in fire flame.
• DO NOT put the wrap into the oven, or it will melt!
• Probes are NOT dishwasher safe. Never submerge the probes in water.
• Always wear protective gloves while using the probes to avoid being burned.

Getting to Know the Device – Smart Grill Thermometer:

• The device provides 4 sockets for probes, which enable you to monitor 4 items at once.
• When there is no probe attached to the Smart Thermometer, the device will automatically turn off.
• AA batteries (x2) are required for operation.
• The Smart Thermometer and batteries are not designed to withstand high heat. If the surface is too hot to touch, it’s too hot for the Smart Thermometer and batteries.

Getting to Know the Device – Probes:

• The device provides 4 food probes and 1 ambient probe.
• Clean the probes before first use.
• Ensure that the probe wires do not come in contact with the grill surface.

Getting to Know the Device – Smart Gas Tank Sensor (Gas Grill Models Only):

• Both the smart grill thermometer and tank sensor must be powered on to view tank sensor data.
• AA batteries (x3) are required for operation.

If you have any questions or need further assistance, please contact Customer Service at 1-888-287-0735.

LIMITED WARRANTY

SMART GRILL THERMOMETER
WITH PROOF OF SALE: The following warranty coverage applies when this smart grill thermometer is correctly installed, operated and maintained according to all supplied instructions. FOR ONE (1) YEAR FROM THE DATE OF ORIGINAL PURCHASE, the smart device will be warranted against defects in material and workmanship. Consumer will receive free replacement parts or device at its sole discretion of the supplier. Consumer will be responsible for S&H cost. All warranty coverage excludes normal wear and tear, accidents or improper maintenance. All warranty coverage is void if this product is used for commercial purposes. For warranty coverage, please visit www.permasteel.net.

SMART GAS TANK SENSOR
WITH PROOF OF SALE: The following warranty coverage applies when this smart gas tank sensor is correctly installed, operated and maintained according to all supplied instructions.

FOR ONE (1) YEAR FROM THE DATE OF ORIGINAL PURCHASE, the smart gas tank sensor will be warranted against defects in material and workmanship. Consumer will receive free replacement parts or device at its sole discretion of the supplier. Consumer will be responsible for S&H cost. All warranty coverage excludes normal wear and tear, accidents or improper maintenance. All warranty coverage is void if this product is used for commercial purposes. For warranty coverage, please visit www.permasteel.net.

NEED HELP?

• Visit Kenmore.com/smart for additional details.
• Watch Kenmore Smart app videos on kenmore.com/smartgrill

Product distributed by Permasteel, 100 Exchange Place, Pomona, CA 91768.

Made in China.

FCC NOTICES

FCC CAUTION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

15.21 INFORMATION TO USER
Any changes or modifications not expressly approved by the party responsible for compliance could void the suer’s authority to operate the equipment.

15.105 INFORMATION TO USER

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

FCC IDENTIFIER: 2A384KS-B6000-TH

SAFETY GUIDES

DO NOT mix old and new batteries and DO NOT mix alkaline, standard (carbon- zinc) or rechargeable (ni-cad, ni0mh, etc.) batteries. Never dispose of batteries in an open fire. Always dispose of batteries in accordance with the local laws.
Avoid placing the Smart Thermometer on hot surfaces. When not in use, store the Smart Thermometer and Smart Gas Tank Sensor in a dry place at a room temperature. DO NOT put the probes directly in fire flame. DO NOT put the wrap into oven, or it will melt! Probes are NOT dishwasher safe. Never submerge the probes in water. Always wear protective gloves while using the probes to avoid being burned.

GET TO KNOW THE DEVICE

SMART GRILL THERMOMETER
The device provides 4 sockets for probes, which enable you to monitor 4 items at once.

NOTE:
When there is no probe attached to the Smart Thermometer, the device will automatically turn off.

WARNING:
The Smart Thermometer and batteries are not designed to withstand high heat. If the surface is too hot to touch, it’s too hot for the Smart Thermometer and batteries.

PROBES
The device provides 4 food probes and 1 ambient probe. Clean the probes before first use.

ATTENTION:
Probes below are for reference only and may differ from the actual product.

WARNING

• The heat resistance varies in different components of the probe.
• DO NOT put the probes directly in fire flame.
• DO NOT put the wrap into oven, or it will melt!
• Probes are NOT dishwasher safe.
• Please wear protective gloves while using the probes at all times to avoid being burned.

SMART GAS TANK SENSOR (Gas Grill Models Only)

NOTE:
Both the smart grill thermometer and tank sensor must be powered on to view tank sensor data.

INSTALLATION GUIDE

SMART THERMOMETER
Attach the device to left side shelf (NOTE: It is magnetically held in place).

ATTENTION:
In order to use the ambient probe, the smart thermometer needs to be attached to the back plate (the back plate is pre-installed to the back of the left side shelf facia).

SMART GAS TANK SENSOR (Gas Grill Models Only)

1. Align and insert the 3 pins on the bottom of the gas tank sensor to the 3 hardy holes on the tank holes on the bottom shelf.
2. Rotate the gas tank sensor to lock it in.

SCREEN INTRODUCTION

PUT IN THE BATTERY
2 AA size batteries are needed for the smart grill thermometer and 3 AA size batteries are needed for the smart gas tank sensor. Make sure they are put in the right direction by following the icons on the unit.

1. Slide the battery cover to open.
2. Put in the batteries, noticing the icons which show the directions.
3. Slide back the battery cover.

INSTALL THE PROBES

• Install the ambient probe with the provided retaining clip onto your grill grates, ideally near the food being cooked. This probe monitors the ambient cooking temperature of the grill.
• Install your food probes 1 to 4 and place them into the food being cooked.
• For optimum performance, please refer to your recipe for probe replacement.
• The Smart Grill Thermometer cycles through one probe at a time including the ambient probe. On the screen displayed is the CURRENT temperature and to the right is the TARGET temperature. There is no target temperature for AMBIENT sensor.

CONNECTING YOUR DEVICES

1. DOWNLOAD THE APP
   Download the free Kenmore Smart™ app to your device and create a profile.
   Visit Kenmore.com/smart for additional details.

2. SELECT
   HINT: Make sure all devices are powered on. Confirm the Bluetooth is enabled on your smart device.

3. PAIR

   • Kenmore Smart™ app will scan for devices. Once it found the thermometer, follow the instruction on the app to finish the pairing process.
   • Once the app syncs with your grill, press the button on the thermometer, and then name your grill.
     NOTE: For Android users, pull down to refresh after naming the thermometer.

4. SET UP IS COMPLETE
   REMINDER: Both thermometer and tank sensor must be powered on to view tank sensor data. Confirm batteries are installed correctly and sufficiently charged.
   

NOTIFICATIONS

• When the target temperature has reached, you will receive beeping sound alarm from the Smart Thermometer, and also receive app notification on your smartphone. To turn off the sound alarm, simply press once on the button on the Smart Thermometer.
• When the device is accidentally disconnected, you will receive app notification that the device is offline.
• When the gas tank fuel level is too low, you will receive app notification.

KENMORE SMART APP FEATURES

KENMORE SMART™ APP
Choose meat type and preference for the food where each probe is inserted, the app and the device will display its current and target temperature.

When the food is ready, the smart thermometer will alarm and receive a notification on your device

NOTE:
The user interface of the app may be changed when upgraded. Please follow the instructions in the app.

KENMORE SMART™ APP
Choose meat type and preference for the food where each probe is inserted, the app and the device will display its current and target temperature.

When the food is ready, the smart thermometer will alarm and receive a notification on your device

NOTE:
The user interface of the app may be changed when upgraded. Please follow the instructions in the app.

NEED HELP

• Visit Kenmore.com/smart for additional details.
• Watch Kenmore Smart app videos on kenmore.com/smartgrill.

Smart control and monitoring functionality of Kenmore® Smart products requires a smartphone or tablet, Bluetooth connectivity, and a free app. These devices are not included. Supports iPhone® and Android® mobile devices. Phone not included with the product.

Apple, the Apple logo, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play and Android are trademarks of Google LLC. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Permasteel Inc. is under license. Other trademarks and trade names are those of their respective owners.

Kenmore, Kenmore Smart, and all marks are trademarks of Transform SR Brands LLC and are used under license. Product distributed by Permasteel, 100 Exchange Place, Pomona, CA 91768. Made in China.

Questions?
Call Customer Service at 1-888-287-0735.

References

• Best Smart Appliances | Fridges, Washers, & Home Devices | Kenmore
• Best Gas Grills | Smart Grills | Kenmore
• Permasteel | Manufacturer of Patio Coolers & Kenmore Gas Grills

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>