anslut 006517 Lamp Post Instruction Manual

June 4, 2024
anslut

anslut 006517 Lamp Post

SAFETY INSTRUCTIONS

  • For outdoor use.
  • Disconnect the power supply before installation.
  • Check that the rated voltage corresponds to the mains supply voltage.
  • Do not connect the light to the mains while it is still in the pack.
  • Check that all electrical cables comply with the applicable regulations and that they are connected in accordance with the instructions. Never attempt to replace damaged electrical cables yourself.
  • Pay attention so that no concealed wires are damaged in connection with installation.
  • Be careful not to damage the insulation on the wires during installation. Make sure that the wires do not come into contact with sharp edges. Damaged insulation can result in a risk of electric shock.
  • Do not insert or remove the light source when the light is connected to the mains.
  • Check that the bulb holder has a light source.
  • Do not use the light without the glass. If the glass is damaged, disconnect from the mains before replacing the glass.

WARNING!

New installations and extensions to existing systems should always be carried out by an authorized electrician. If you have the necessary experience and knowledge (otherwise contact an electrician), you can replace power switches and wall sockets, fit plugs, extension cords and light sockets. Incorrect installation can result in fatal injury and the risk of fire.

SYMBOLS

  • Approved as per applicable directives.
  • Recycle discarded product as electrical waste.

TECHNICAL DATA

  • Rated voltage 230 V ~ 50 Hz
  • Output Max 100 W
  • Socket E27
  • Protection rating IP44
  • For light sources with energy class A++ to D

INSTALLATION

See illustrations for installation instructions:

WARNING!
Disconnect the power supply before installation.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals