CLOSETMAID ProGarage 32 Inch L Garage Hanging Track Storage System Instruction Manual

Table of Contents

CLOSETMAID-ProGarage-32-Inch-L-Garage-Hanging-Track-Storage-System-
PRODUCT

Product Name: Hanging Garage Rack
Model Number: 10000-00746
Date of Manufacture: 01/22
Description: The Hanging Garage Rack is a wall-mounted support system designed for organizing and storing items in the garage.
Maximum Weight Capacity: 2 units

WARNING

CHOKING HAZARD FOR SMALL CHILDREN. The unit contains small parts. Children should always be under adult supervision or serious bodily injury could occur. The unit is intended to be assembled by an adult.
DO NOT OVERLOAD UNIT. If any shelf of the unit bows or bends, it is overloaded. The shelf could collapse and cause serious bodily injury and/or damage to personal belongings.
DO NOT CLIMB OR STEP ON THE UNIT. The unit may become unstable and either tip over or collapse. Serious bodily injury and/or damage to personal belongings may occur.
WE RECOMMEND YOU HAND TIGHTEN SCREWS TO AVOID OVER TIGHTENING WITH POWER TOOLS WHERE POSSIBLE. IF POWER TOOLS ARE NECESSARY, PLEASE UTILIZE DISCRETION AND USE THE LOWEST TORQUE SETTING NECESSARY FOR ASSEMBLY.

Max Weight:

STOP

FOLLOW INSTRUCTIONS CAREFULLY

Manufacturer will replace any missing or damaged part due to manufacturer defect for thirty days after purchase. Please have proof of purchase for warranty claims.
Please do not return product to the retail store. For product assistance and warranty information please call Consumer Affairs at 1-800-874-0008.

HARDWARE REQUIRED

CLOSETMAID-ProGarage-32-Inch-L-Garage-Hanging-Track-Storage-System-
FIG-1

HARDWARE PROVIDED

Name /Qty.

PART

Name /Qty.

CLOSETMAID-ProGarage-32-Inch-L-Garage-Hanging-Track-Storage-System-
FIG-4

STEP 1A: Mark wall and drill holes for concrete mounting

CLOSETMAID-ProGarage-32-Inch-L-Garage-Hanging-Track-Storage-System-
FIG-6

Place the rail (AA) in the desired position and use a pencil to mark the locations on the wall for the six holes on the rail.
Remove the rail and drill a 5/16 in. hole at each marked wall location. Please make sure the rail is oriented correctly with the hook track channel on top.

STEP 1A: Insert anchors and secure rail to wall

CLOSETMAID-ProGarage-32-Inch-L-Garage-Hanging-Track-Storage-System-
FIG-7

Insert six concrete anchors (B) into the holes in the wall and use a #3 phillips screwdriver to secure the rail (AA) to the wall with six #10 x 1.5 in. screws (A).

STEP 1B: Secure rail using stud mounting

CLOSETMAID-ProGarage-32-Inch-L-Garage-Hanging-Track-Storage-System-
FIG-8

Locate wall studs, place rail (AA) in desired position, and use a #3 phillips screwdriver to secure the rail to the studs with six #10 x 1.5 in. screws (A). Please make sure the rail is oriented correctly with the hook track channel on top.

STEP 2: Attach hooks to rail

CLOSETMAID-ProGarage-32-Inch-L-Garage-Hanging-Track-Storage-System-
FIG-9

To attach the hooks (BB and CC) to the rail (AA), place the top curved section of the hook onto the top of the rail and pull downward to secure. Push the hook upward to remove and reposition.