Roth Touchline SL EnergyLogic Projectline Wireless Controller Installation Guide

June 12, 2024
Roth

Roth Touchline SL EnergyLogic Projectline Wireless Controller

Roth Touchline® SL Room sensor

Roth Touchline SL EnergyLogic Projectline Wireless Controller
1

Insert batteries (included), be aware of +/- polarity.

Roth Touchline SL EnergyLogic Projectline Wireless Controller
2

Mount backplate on the wall (screws incl.) sensor slides onto back plate.

The sensor can be connected to all Controllers in the Roth Touchline® SL series. Pairing/registering is made the same way on all Controllers using the same buttons. On the pictures the panel of the Roth Touchline® SL Controller, master is shown.

Roth Touchline SL EnergyLogic Projectline Wireless Controller
3

Pairing/registering the sensor to a zone (channel). All connections must be made to the Controller (pump, actuators and optionally potential free relay) before start-up. Please see controller manual for details.

Roth Touchline SL EnergyLogic Projectline Wireless Controller
4

Once the sensor is connected to the Zone/Channel, the overview shows: – Temperatures on the sensor (setpoint 22,0°C, actual 25,0°C) , battery (99%), signal strenght (100% – must be at least 10%) and mode of operation (CON = continously). For more info on the display, see controller manual. Repeat registration for other sensors, by choosing one of the other zones (2 to 8) until required number of sensors are connected.
Attention! If a sensor is paired to the wrong zone, do not delete the sensor. Pair the sensor to the correct/new zone and the old pairing will be deleted.

Settings for temperature and mode must be done on the controller’s display. For constant temperature settings follow the steps 13 – 19 below.

Roth Touchline SL EnergyLogic Projectline Wireless Controller
4

If a different mode than constant temperature is wanted, for example time schedule or time limitation, then follow the below steps below 20 – 26 below. For more information about time schedules, we refer to the online manual for Roth Touchline® SL Controller – Master.

Roth Touchline SL EnergyLogic Projectline Wireless Controller
6

Picture 26, now shows the new setpoint 22,0°C and the remaining time for this temperature (01:59). When the time expires the system automatically returns to the original selected constant temperature (19°C).

ROTH FINLAND OY
Raaseporintie 9 (Talo 2)
10600 Tammisaari
Puh. +358 (0)19 440 330
S-posti: service@roth-finland.fr
roth-finland.fr
facebook.com/RothFinland

ROTH DANMARK A/S
Centervej 5
3600 Frederikssund
Tlf. +45 4738 0121
E-mail: service@roth-danmark.dk
roth-danmark.dk

ROTH SVERIGE AB
Höjdrodergatan 22
212 39 Malmö
Tel. +46 40534090
Fax +46 40534099
E-mail: service@roth-sverige.se
roth-sverige.se

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Roth User Manuals

Related Manuals