exhart 73253-RS Kinetic Garden Stake Instruction Manual
- June 12, 2024
- exhart
Table of Contents
exhart 73253-RS Kinetic Garden Stake
Product Information
- Product Model: 73253-RS
- Product Name: T-Pole Spinner
- Components Included:
- Spinner x2
- Cap x2
- Middle Pole x2
- Stake Base
- Stake Support
- Manufacturer Website: exhart.com
Product Usage Instructions
- Attach the first spinner (B) with indents facing outward to the t-pole (A) by inserting it through the opening.
- Attach the cap (C) to the t-pole (A) (the result of step 1) by screwing it to the right until it is firmly tightened.
- Attach the second spinner (B) with indents facing outward to the t-pole (A) (the result of step 2) by inserting it through the opening.
- Attach the cap (C) to the second spinner (B) (the result of step 3) by screwing it to the right until it is firmly tightened.
- Lay the assembly down for the following steps.
- Attach the middle pole (D) to the t-pole (A) (the result of step 4) by aligning the hole on the t-pole with the button on the middle pole until it clicks in place.
- Attach the second middle pole (D) to the middle pole (D) (the result of step 5) by aligning the hole on the middle pole with the button on the second middle pole until it clicks in place.
- Attach the stake support (F) to the stake base (E) by inserting it through the opening.
- Attach the stake base (E) (the result of step 7) to the middle pole (D) (the result of step 6) by aligning the hole on the middle pole with the button on the stake base until it clicks in place.
- Once everything is assembled, insert the stake base firmly into the ground. For best results, install on flat ground and ensure that the stake is 90 degrees vertical to the ground.
Assembly Instructions
Step 1
Attach spinner (B) with indents facing outward to t-pole (A) by inserting it
through the opening.
Step 2
Attach cap (C) to t-pole (A) (the result of step 1) by screwing it to the
right until it is firmly tightened.
Step 3
Attach the second spinner (B) with indents facing outward to t-pole (A) (the
result of step 2) by inserting it through the opening.
Step 4
Attach cap (C) to spinner (B) (the result of step 3) by screwing it to the
right until it is firmly tightened.
Step 5
Attach middle pole (D) to t-pole (A) (the result of the step by aligning the
hole on the t-pole with the button on the middle pole until it clicks in
place.
Step 6
Attach the middle pole (D) to the second middle pole (D) (the result of step
5) by aligning the hole on the middle pole with a button on the middle pole
until it clicks in place.
Step 7
Attach stake support (F) to stake base (E) by inserting it through the
opening.
Step 8
Attach stake base (E) (a result of step 7) to middle pole (D) (a result of
step 6) by aligning the hole on the middle pole with a button on the stake
base until it clicks in place. When everything is assembled, insert the stake
base firmly into the ground. For best results, install on flat ground and
ensure that the stake is 90 degrees vertical to the ground. FOR DECORATIVE USE
IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOYS. © 2022 Exhart – Westlake
Village, CA 91362. Made in China / Fabrique en Chine. All Rights Reserved. For
help please call 1-800-775-5503 |
support@exhart.com
exhart.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>