exhart 73988-RS Kinetic Garden Stake Instruction Manual
- June 12, 2024
- exhart
Table of Contents
exhart 73988-RS Kinetic Garden Stake
Product Information
- Product Name: Top Pole Spinner x4
- Model Number: 73988-RS
- Manufacturer: Exhart
- Website: exhart.com
- Customer Support: 1-800-775-5503 | support@exhart.com
Product Usage Instructions
- Step 1: Attach the spinner (B) to the top pole (A) by inserting it is through the opening.
- Step 2: Attach the nut (C) to the spinner (B) (result of step 1) by screwing it to the right until it is firmly tightened.
- Step 3: Attach the spinner (B) to the top pole (A) (result of step 2) by inserting it through the opening.
- Step 4: Attach the nut (C) to the spinner (B) (result of step 3) by screwing it to the right until it is firmly tightened. Lay the assembly down for the following steps.
- Step 5: Attach the middle pole (D) to the top pole (A) (result of step 4) by aligning the hole on the top pole with the button on the middle pole until it clicks in place.
- Step 6: Attach the spinner (B) to the middle pole (D) (result of step 5) by inserting it into the opening.
- Step 7: Attach the nut (C) to the spinner (B) (result of step 6) by screwing it to the right until it is firmly tightened.
- Step 8: Attach the spinner (B) to the middle pole (D) (result of step 7) by inserting it into the opening.
- Step 9: Attach the nut (C) to the spinner (B) (result of step 8) by screwing it to the right until it is firmly tightened.
- Step 10: Attach the bottom pole (E) to the middle pole (D) (result of step 9) by aligning the hole on the middle pole with the button of the bottom pole until it clicks in place.
- Step 11: Attach the stake support (G) to the stake base (F) by inserting it through the opening.
- Step 12: Attach the stake base (F) to the bottom pole (E) by aligning the hole of the bottom pole with the button of the stake base until it clicks in place.
When everything is assembled, insert the stake base firmly into the ground.
For best results, install on flat ground and ensure that the stake is 90
degrees vertical to the ground.
Note: This product is for decorative use in the garden and should not be
given to children as a toy.
ASSEMBLY INSTRUCTION
Step 1
Attach spinner (B) to top pole (A) by inserting it through the opening.
Step 2
Attach nut (C) to spinner (B) (the result of step 1) by unscrewing it to the
right until it is firmly tightened.
Step 3
Attach spinner (B) to top pole (A) (result of step 2) by inserting it through
the opening.
Step 4
Attach nut (C) to spinner (B) (the result of step 3) by screwing it to the
right until it is firmly tightened.
Step 5
Attach middle pole (D) to top pole (A) (the result of step 4) by aligning the
hole on the t-pole with the button on the middle pole until it clicks in
place.
Step 6
Attach spinner (B) to middle pole (D) (result of step 5) by inserting it into
the opening.
Step 7
Attach nut (C) to spinner (B) (the result of step 6) by screwing it to the
right until it is firmly tightened.
Step 8
Attach spinner (B) to middle pole (D) (result of step 7) by inserting it into
the opening.
Step 9
Attach nut (C) to spinner (B) (the result of step 8) by screwing it to the
right until it is firmly tightened.
Step 10
Attach the bottom pole (E) to the middle pole (D) (the result of step 9) by
aligning the hole on the middle pole to the button of the bottom pole until it
clicks in place.
Step 11
Attach stake support (G) to stake base (F) by inserting it through the
opening.
Step 12
Attach stake base (F) to bottom pole (E) by aligning the hole of the bottom
pole to the button of the stake base until it clicks in place. When everythjng
is assembled, insert the stake base firmly into the ground. For best results,
install on flat ground and ensure that the stake is 90 degrees vertical to the
ground.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>