OLIGHT i5T Ti Slim tail Switch Flashlight User Manual
- June 6, 2024
- OLIGHT
Table of Contents
( LIMITED EDITION )
USER MANUAL
Thank you for purchasing this Olight Product. Please read this manual carefully before use and keep it for future reference!
PACKAGE CONTENTS
SPECIFICATIONS
- All the above specifications are test results based on ANSI/NEMA FL1-2009 Standards.
INSULATING FILM
Before first use, unscrew the tailcap and remove the insulating film.
BATTERY INSTALLATION
If the battery needs to be replaced, make sure that the positive end of the
new battery faces the flashlight head when you put it in.
AVAILABLE BATTERIES
- 1 x 1.5V AA alkaline battery (included)
- 1 x AA NiMH battery (compatible)
DANGER
- DO NOT throw the light directly into human eyes. This may cause temporary blindness or permanent damage to the eyes.
- DO NOT cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials.
- Please DO NOT use batteries other than the ones mentioned in the “available batteries”, especially rechargeable lithium batteries, otherwise, it could lead to the damage of the flashlight or unexpected danger.
WARNING
- Keep out of reach of children.
- If the light is about to be put aside for a long time or be transported, please unscrew the tailcap and remove the battery to cut off the circuit.
NOTICE
- Ensure battery is inserted with the positive (+) end pointing to the head of the flashlight (LED side).
- When the flashlight is turned on, it will go to low as the default mode. Continue to click on and off within 2 seconds after it was turned off to shift between low and high brightness levels. If it is turned on after it was switched off for over 2 seconds, it will go directly to low mode as default again.
- It is normal for the flashlight not to be able to reach 300 lumens when the battery voltage is too low (under 1.2V).
When the light is first turned on, it will go to low as the default mode. Soft press without fully clicking for momentary on. Cycle through momentary low and high mode by quickly soft pressing, letting go, and soft pressing again. Deep press for constant on (you will hear a click) . Continue to click on and off within 2 seconds after it was turned off to shift between low and high brightness levels. If it is turned on after it was switched off for over 2 seconds, it will go directly to low mode as default again.
WARRANTY
Within 30 days of purchase: Return to the original seller for repair or
replacement.
Within 5 years of purchase : Return to Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse,
disintegrations, negligence, accidents, improper maintenance, or repair by
anyone other than an authorized retailer or Olight itself.
EU-DECLARATION OF CONFORMITY
EU-Declaration of Conformity can be found here: https://olightworld.com/ec-
declaration
USA Customer Support
[email protected]
Global Customer Support
[email protected]
Visit www.olightworld.com to see our complete
product line of portable illumination tools.
Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan
Road, Changan Town, Dongguan City, Guangdong, China.
A. 09, 17, 2020
3.0413.6010.9005
Made in China
www.DrMemory.com/Olight
References
- Olight Manual & Datasheet Library
- Olight | Illuminate Your World.
- Flashlights, Tactical Light, Outdoor Tools - Olight Official Store- Olight