exhart 72775-RS Double Kinetic Garden Spinner Instruction Manual
- June 12, 2024
- exhart
Table of Contents
exhart 72775-RS Double Kinetic Garden Spinner Instruction Manual
Parts List
| Top Pole | Big Spinner | Barrel | Small Spinner |
|---|---|---|---|
|  | |||
| Cap | Middle Pole | Stake Base | Stake Support |
| --- | --- | --- | --- |
Assembly Instruction
-
Step 1:
Attach big spinner (B) with indents facing outward to top pole (A) by inserting it through the opening. -
Step 2:
Attach barrel (C) to top pole (A) (the result of step 1) by inserting it through the opening. -
Step 3:
Attach small spinner (D) with indents facing outward to top pole (A) (the result of step 2) by inserting it through the opening. -
Step 4:
Attach cap (E) to small spinner (D) (the result of step 3) by screwing it to the right until it is firmly tightened.
Lay assembly down for the following steps:
-
Step 5:
Attach middle pole (F) to top pole (A) (result of step 4) by aligning hole on t-pole with button on middle pole until it clicks in place. -
Step 6:
Attach stake support (H) to stake base (G) by inserting it through opening. -
Step 7:
Attach stake base (G) (result of step 6) to middle pole (F) (result of step 6) by aligning hole in middle pole with button on stake base until it clicks in place.
When everything is assembled, insert stake base firmly into the ground.
For best results, install on flat ground and ensure that the stake is 90
degrees vertical to the ground.
CUSTMER SUPPORT
FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY.
© 202 2 Exhart – Westlake Village, CA 91362. Made in China / Fabrique en
Chine. All Rights Reserved.
For help please call:
1-800-775-5503
Email: [email protected]
exhart.com