exhart 72187-RS Solar Double Spinner Colorful Metal Butterfly Kinetic Wind Chime Instruction Manual

: June 12, 2024
: exhart

Table of Contents

exhart 72187-RS Solar Double Spinner Colorful Metal Butterfly Kinetic
Product Information
Product Usage Instructions
Assembly Instructions
OPERATION
MAINTENANCE
2) and pulling the battery cover off the unit (Photo #3). Replace the battery
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

exhart 72187-RS Solar Double Spinner Colorful Metal Butterfly Kinetic

Wind Chime

Product Information

Product Name: Wind Chime with Solar Light
Model Number: 72187-RS

Components

Cap (2)
Spinner (2)
T-pole
Wind Chime

Product Usage Instructions

Assembly

Attach cap (A) to spinner (B) by inserting it through the opening.
Attach spinner (B) (result of step 1) to t-pole (C) by screwing it to the right until it is firmly tightened.
Attach second cap (A) to spinner (B) by inserting it through the opening.
Attach spinner (B) (result of step 3) to t-pole (C) (result of step 2) by screwing it to the right until it is firmly tightened.
Attach wind chime (D) to t-pole (C) (result of step 4) by using the hook on the wind chime and clipping it into the t-pole.

Operation ON/OFF

The unit is shipped in the OFF position. Locate the ON/OFF button on the bottom of the unit and slide it into the ON position (Photo #1). In the ON position, the solar cell will light up automatically at dusk and will shut OFF automatically when the solar panel is exposed to daylight.

Location

Select a sunny location. Place the unit in direct sunlight for at least one day to fully charge the battery. The more direct sunlight your new solar light is exposed to during the day, the longer the light will operate in the evening.

Maintenance

Cleaning: The solar panel has an epoxy cover that needs to be kept free of dirt, debris, and snow at all times. Wipe the panel periodically with a damp cloth. Failure to do so may prevent the battery from charging properly, reducing operating time and the life of the battery.
Battery Replacement: The battery may need to be replaced after a year of continuous use. To replace, open the battery compartment by unscrewing the two screws (Photo #2) and pulling the battery cover off the unit (Photo #3). Replace the battery with a 300mAh Ni-MH AA 1.2V rechargeable battery (Photo #4). The capacity of the replacement battery should not be less than the recommended capacity. Replace the battery cover and screw two screws firmly to seal the unit.
Disposal: The battery must be recycled or disposed of properly.
Do not short circuit or dispose of it in fire.
For more information, visit exhart.com

Parts

Assembly Instructions

Step 1: Attach cap (A) to spinner (B) by inserting it through the opening.
Step 2: Attach spinner (B) (result of step 1) to t-pole (C) by screwing it to the right until it is firmly tightened.
Step 3: Attach second cap (A) to spinner (B) by inserting it through the opening.
Step 4 : Attach spinner (B) (result of step 3) to t-pole (C) (result of step 2) by screwing it to the right until it is firmly tightened.
Step 5: Attach wind chime (D) to t-pole (C) (result of step 4) by using hook on wind chime and clipping it into t-pole.

OPERATION

ON/OFF: The unit is shipped in the OFF position. Locate the ON/OFF button on the bottom of the unit and slide it into the ON position (Photo #1). In the ON position, the solar cell will light up automatically at dusk and will shut OFF automatically when the solar panel is exposed to daylight.
Location: Select a sunny location. Place the unit in direct sunlight for at least one day to fully charge the battery. The more direct sunlight your new solar light is exposed to during the day, the longer the light will operate in the evening.

MAINTENANCE

Cleaning: The solar panel has an epoxy cover that will need to be kept free of dirt and debris, and snow, all the time. Wipe the panel periodically with a damp cloth. Failure to do so will prevent the battery from charging properly, reducing operating time and the life of the battery. Check the battery periodically, especially after winter months, and replace when necessary. The battery may need to be replaced after a year of continuous use. To replace, open the battery compartment by unscrewing the two screws (Photo

2) and pulling the battery cover off the unit (Photo #3). Replace the battery

with a 300mAh Ni-MH AA 1.2V rechargeable battery (Photo #4). The capacity of the replacement battery shall not be less than the recommended capacity. Replace the battery cover and screw two screws in firmly to seal the unit.

Warning

Only use rechargeable Ni-MH AA 300mAh 1.2V battery.
Failure to insert the battery in the correct polarity, as indicated in the battery compartment, may shorten the life of the battery or cause the battery to leak.
Do not dispose of batteries in fire, or heat, as battery may explode.
Do not open, short circuit, or mutilate battery, as injury may occur.
Batteries should be recycled, or disposed of, in accordance with Federal, state and local regulations.
Electrical rating is 0.05W

Battery must be recycled or disposed of properly. Do not short circuit or dispose of in fire.

FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY.
© 2022 Exhart – Westlake Villlage, CA 91632.
Made in China
All Rights Reserved.
For help please call 1-800-775-5503
support@exhart.com
exhart.com