EUROfase 46841 Seraph LED Chandelier Instructions
- June 13, 2024
- EUROfase
Table of Contents
EUROfase 46841 Seraph LED Chandelier
Product Information
The product code for this item is 46841. It belongs to the BCD H series and is designed for various applications.
The product features include:
- High durability
- Efficient performance
- Easy installation
Product Usage Instructions
Before using the product, please carefully read and follow these instructions:
- Ensure that you have all the necessary components and accessories for installation.
- Choose a suitable location for the product installation, considering factors such as accessibility and safety.
- Make sure the power source is compatible with the product’s requirements.
- Connect the product to the power source using the provided cables and connectors.
- Follow the specific instructions provided in the user manual for any additional configuration or setup.
- Once the product is installed and connected, turn on the power source.
- Check if the product is functioning properly by following the recommended test procedures.
- If any issues arise during installation or usage, refer to the troubleshooting section in the user manual or contact customer support for assistance.
Note : The product should not be used in environments with extreme temperatures or high moisture levels. Always handle the product with care to prevent damage.
Thank You
You’ve just purchased a lighting product designed and built to provide you
with years of enjoyment.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical order.
- Use a qualified electrician for the installation of this lighting fixture. Before installing the fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL-certified wire connectors suitable for the gauge, type, and number of conductors.
- Attach the junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If the junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
Estimated Assembly Time: 20 minutes
Tools Required For Assembly
(not included):
- Flathead screwdriver,
- Phillips screwdriver,
- Pliers, Electrical tape, and
- Wire cutters.
Helpful Tools
(not included):
- Wire strippers,
- Ladder
HOW MANY WATTS?
57 W MAX, LED, 120V~ ., 60Hz (Dimmable LED Included)
INSTALLATION
- A -Outlet Box screw × 2
- B -Black wire(L) from junction box
- C -White wire(N) from junction box
- D -Green wire/Bare copper (G) from the junction box
- E -Black wire (L) from the fixture
- F -White wire (N) from the fixture
- G -Green wire/Bare copper from the fixture
- H -Wire connector × 3
Note : Press the wire restraint to adjust the desired length of cable.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>