exhart 72774-RS Kinetic Garden Stake Instruction Manual
- June 12, 2024
- exhart
Table of Contents
exhart 72774-RS Kinetic Garden Stake
WHAT IN BOX
Assembly Instructions
-
Step 1:
Attach spinner (B) with indents facing outward to t-pole (A) by inserting it through the opening
-
Step 2:
Attach cap (C) to t-pole (A) (the result of step 1) by screwing it to the right until it is firmly tightened.
-
Step 3:
Attach second spinner (B) with indents facing outward to t-pole (A) (the result of step 2) by inserting it through the opening
-
Step 4:
Attach cap (C) to spinner (B) (the result of step 3) by screwing it to the right until it is firmly tightened.
-
Step 5:
Attach middle pole (D) to t-pole (A) (the result of step 4) by aligning the hole on the t-pole with the button on the middle pole until it clicks in place.
-
Step 6:
Attach middle pole (D) to second middle pole (D) (the result of step 5) by aligning the hole on the middle pole with the button on the middle pole until it clicks in place
-
Step 7:
Attach stake support (F) to stake base (E) by inserting it through the opening.
-
Step 8:
Attach stake base (E) (the result of step 7) to middle pole (D) (the result of step 6) by aligning the hole in the middle pole with the button stake base until it clicks in place.
When everything is assembled, insert the stake base firmly into the ground. For best results, install on flat ground and ensure that the stake is 90 degrees vertical to the ground
FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOYS.
© 2022 Exhart – Westlake Village, CA 91362. Made in China / Fabrique en Chine.
All Rights Reserved.
For help please call 1-800-775-5503
[email protected]
exhart.com