exhart 73252-RS Kinetic Garden Stake Instruction Manual
- June 12, 2024
- exhart
Table of Contents
exhart 73252-RS Kinetic Garden Stake
Product Information
- Product Name: 73252-RS
- Product Type: Top Pole Big Spinner
Components
- Top Pole (A)
- Big Spinner (B)
- Barrel (C)
- Small Spinner (D)
- Cap (E)
- Middle Pole (F)
- Stake Base (G)
- Stake Support (H)
Product Usage Instructions
-
Step 1:
Attach the big spinner (B) to the top pole (A) by inserting it through the opening, ensuring that the indents are facing outward. -
Step 2:
Attach the barrel (C) to the top pole (A) from step 1 by inserting it through the opening. -
Step 3:
Attach the small spinner (D) to the top pole (A) from step 2 by inserting it through the opening, ensuring that the indents are facing outward. -
Step 4:
Attach the cap (E) to the small spinner (D) from step 3 by screwing it to the right until it is firmly tightened. -
Step 5:
- Lay the assembly down for the following steps.
- Attach the middle pole (F) to the top pole (A) from step 4 by aligning the hole on the T-pole with the button on the middle pole until it clicks in place.
-
Step 6:
Attach the stake support (H) to the stake base (G) by inserting it through the opening. -
Step 7:
Attach the stake base (G) from step 6 to the middle pole (F) from step 6 by aligning the hole in the middle pole with the button on the stake base until it clicks in place. -
Final Step:
When everything is assembled, insert the stake base firmly into the ground. For best results, install on flat ground and ensure that the stake is 90 degrees vertical to the ground.
For more information or assistance, please visit exhart.com.
PART LIST
ASSEMBLING INSTRUCTION
-
Step 1:
Attach big spinner (B) with indents facing outward to top pole (A) by inserting it through the opening. -
Step 2:
Attach barrel (C) to top pole (A) (the result of step 1) by inserting it through the opening. -
Step 3:
Attach small spinner (D) with indents facing outward to top pole (A) (the result of step 2) by inserting it through the opening. -
Step 4:
Attach cap (E) to small spinner (D) (the result of step 3) by screwing it to the right until it is firmly tightened. -
Step 5:
Attach middle pole (F) to top pole (A) (result of step 4) by aligning hole on t-pole with button on middle pole until it clicks in place. -
Step 6:
Attach stake support (H) to stake base (G) by inserting it through opening. -
Step 7:
Attach stake base (G) (result of step 6) to middle pole (F) (result of step 6) by aligning hole in middle pole with button on stake base until it clicks in place.
When everythjng is assembled, insert stake base firmly into the ground. For best results, install on flat ground and ensure that the stake is 90 degrees vertical to the ground.
ABOUT COMPANY
FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY. © 2022
Exhart – Westlake Village, CA 91362. Made in China / Fabrique en Chine. All
Rights Reserved. For help please call
1-800-775-5503 |
support@exhart.com
exhart.com