strands CRUISE LIGHT STROBE CONTROLLER User Manual
- June 5, 2024
- Strands
Table of Contents
strands CRUISE LIGHT STROBE CONTROLLER
INCOMING CABLES
- RED – Positive (+)
- BLACK – Ground (-)
- YELLOW – Pattern selection
OUTGOING CABLES
6 CHANNELS
- RED – Positive (+) (Maximum 30W/channel)
- BLACK – Ground (-) (not needed if light is connected to ground)
PATTERNS
1. All single flash
2. All double flash
3. All quad flash
4. Channel 1, 3, 5 alternating with 2, 4, 6
5. 1, 3, 5 / 2, 4, 6 alternating doubble flash
6. 1, 3, 5 / 2, 4, 6 alternating quad flash
7. 1 >>> 6, single (1channel lit at a time)
8. 6 >>> 1, single (1channel lit at a time)
9. 1 >>> 6, double (2channels lit at a time)
10. 6 >>> 1, double (2channels lit at a time)
11. All patterns random, ~13seconds on every pattern
12. Stedy on
READ THIS BEFORE INSTALLATION
READ ALL INSTRUCTIONS AND STUDY DIAGRAMS BEFORE INSTALLATION!
LEGAL MOUNTING
Check with state or local authorities for laws governing usage and proper mounting of your new product.
TAKE CARE OF YOUR PRODUCT
Keep the product clean. Dirt may shorten the products lifetime.
WARNING!
Do not use higher volts than the product description states.
Do not overload channels with lights consuming more wattage than each channel
is intended for.
Contact us if you need support: support@strands.se or +46(0)320-450450
www.strands.se
www.strandseurope.com
References
- Proffs på Fordonsbelysning & Lastbilstillbehör - Strands
- Proffs på Fordonsbelysning & Lastbilstillbehör - Strands