Beghelli Formula 65 LED CT GL LED Emergency Light Instruction Manual

Beghelli Formula 65 LED CT GL LED Emergency Light

INFO

www.beghelli.com

Features

Dimension

Basic setting (1h-3h) without using App

Wiring with Infinity mode deactivated

• For the functioning please refer to the instruction manuals either of the Central CableCom Connect cod. 201517
• For the Central configuration the batteries must be sufficiently charged.
• Be careful NOT to invert the phase and neutral polarity. Maximum connectable lamps 32.
• Do not connect other types of devices on the power cable / BUS L + N-.

Wiring with Infinity mode activated

• Wiring 2.1 The appliance goes into emergency conditions for absence of general emergency electricity (CableCom); absence of a local lighting
• Wiring 2.2 The appliance goes into emergency conditions in the absence of general emergency electricity (CableCom).

Caution:

• SA luminaires can be set SE only through the App (with smartphone flash on the lamp or with wi-fi with Central CableCom Connect).
• With Infinity mode on N2 L2 must be connected like wiring 2.1 or 2.2.

BATTERY INSTALLATION

• For autonomy management refer to the table
  • With Infinity mode activated and lamp wired as scheme 2.1 the autonomy is infinite with Cablecom network present (N-L+)

Expansion with LG

available option

CONFIGURATION AND COMMANDS| AT (without APP and without Central)| AT + APP| AT **+ CENTRALE CABLECOM CONNECT (cod. 20151)

• APP
  ---|---|---|---
  CONFIGURAZIONI – CONFIGURATION| Autonomia- Duration 1h| • Default| • Default| • Default
  Autonomia- Duration 1,5h|  | •| •
  Autonomia- Duration 2h|  | •| •
  Autonomia- Duration 3h| • con jumper| •| •
  Autonomia- Duration 8h|  | •| •
  Maintained (only on Maintained Luminaire)|  | •| •
  Setting even odd AT| • Preset by the ID of the QR code. Cannot be modified| •| •
  Test duration 1h or autonomy set| Test duration 1h| •| •
  Settaggio Infinity mode / Setting Infinity mode| • Infinity mode disabled by default|  | •
  Rest Mode|  |  | •
  Manufacturer data reset|  | •| •
  COMANDI E FUNZIONI –**| Start/Stop Functional Test|  | •| •
  Stop duration Test|  |  | •
  Sync automatic Test|  | •| With a configurable delayed start
  Scheduling automatic Test|  |  | With change periodicity
  Remotizzazione error Failure report from a remote place|  |  | • By LED on Central; the APP indicates which lamp is in error
  Luminaire tracking|  |  | •
  Type of luminaire identification|  |  | •
  LOGBOOK|  |  | •

Use App B.connect

• A- Open App B.connect (available for download on the App Store and Google Play).
• B- The configuration of the lamp can be accessed through the “luminaire” menu.

LAMP RESPONSE:

• 1 high brightness flash= function performed
• 5 low light flashes= function NOT enabled
• No flashing= command NOT received
• N.B. With CableCom Connect control unit cod 20151 all configurations and commands can be sent remotely via the “nuBe” cloud.
• POSITION LAMP FOR COVER ENSURE THE PROGRAM (eg. a lot of light – less distance)

AUTOMATIC TESTS PERIODICITY:

• FUNCTIONAL TEST (30 sec)= every 28 days
• AUTONOMY TEST (1h)= every 26 weeks
• Even lamps carry out the autonomy test 1 week after the odd lamps.(0,2,…,8,A,C,E)= even; (1,3,…,9,B,D,F)= odd.

LED SIGNALS

• FIXED GREEN BATTERY CHARGED
  • FLASHING GREEN BATTERY CHARGING
• ONE RED FLASH BATTERY ERROR DURATION
  • TWO RED FLASHES LIGHTING LED ERROR
• THREE RED FLASHES BATTERY DISCONNECTED
• OPENING THE COMMUNICATION FROM APP: Remove and reset the network for less than 3 seconds.
• The communication remains possible for 2 hours and for 1 min the LED flashes orange to signal the communication opening.
• The Functional Test and the Functional STOP Test are controlled by the B.Connect App at any time without having to open communication with the device.

WARNINGS – GUARANTEE

• This device shall be used exclusively for the purpose for which it has been designed. Any other use is considered improper and the therefore dangerous.
• Rechargeable battery and LED source are non-replaceable type.
• Contact an authorised technical service centre for any repairs possibly required use only original spare parts.
• The lacked respect of the above conditions may compromise the safety of the device.
• Caution: electric shock
• www.beghelli.com

Documents / Resources

| Beghelli Formula 65 LED CT GL LED Emergency Light [pdf] Instruction Manual
334900784, 334.902.191, Formula 65 LED CT GL, LED Emergency Light, Formula 65 LED CT GL LED Emergency Light, Emergency Light, Light
---|---

References

• Lighting, LED, security systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>