CANGAROO SG402 Electric Swing CLOUD Grey Instruction Manual

June 8, 2024
CANGAROO

SG402 Electric Swing CLOUD Grey
Instruction ManualCANGAROO SG402 Electric Swing CLOUD
Grey

INSTRUCTION MANUAL SWING CRADLE “CLOUD” Item No SG402

SG402 Electric Swing CLOUD Grey

CANGAROO SG402 Electric Swing CLOUD Grey - Figure 1CANGAROO SG402 Electric Swing CLOUD Grey - Figure
2CANGAROO SG402 Electric Swing CLOUD Grey -
Figure 3CANGAROO SG402 Electric Swing CLOUD
Grey - Figure 4CANGAROO SG402 Electric Swing
CLOUD Grey - Figure 5CANGAROO SG402
Electric Swing CLOUD Grey - Figure 6

This product is manufactured in accordance with the requirements of the Directives of the European Parliament and of the Council 2001/95 / EC “General Product Safety”  and 2009/48 / EC “Safety of Toys”, of the European Standards EN 16232: 2013 “Child use and care articles – Infant swings ”and EN 12790: 2009 “Child use and care  articles – reclined cradles”, the Ordinance on the essential requirements and conformity assessment of toys, the Ordinance on conformity marking and the European  standards applicable to toys and the Consumer Protection Act by national legislation.
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

WARNING

  • Never leave the child unattended.

  • Do not use this product once your child can sit up unaided or weighs more than 9 kg.

  • This product is not intended for prolonged periods of sleeping.

  • Never use this product on an elevated surface (e.g. a table).

  • Always use the restraint system.

  • To avoid injury ensure that children are kept away when unfolding and folding this product.

  • Do not let children play with this product.

  • Do not move or lift this product with the baby inside it.

  • When the product is connected to a music player, ensure that the volume of the music player is set to a low value.

  • Protect from fire and direct heat sources.

  • This product does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable cot or bed.

  • Do not use the product if any components are broken or missing.

  • Do not use accessories or replacement parts other than those approved by the manufacturer.

  • Do not make any changes or modifications to the product.

  • Before using the product for the first time, you must check that all parts are correctly installed and fixed and that there are no missing parts.

  • The assembly of the product should be performed by an adult only.

  • Do not place more than one child in the product!

  • Use the product only for its intended purpose at home.

  • Do not move the product or adjust the backrest while the child is in it.

  • Never use on a soft surface (bed, sofa, pillow) as the product may tip over and cause suffocation in soft surfaces.

  • Do not use the toy bar to lift and carry the product.

  • All actions related to the power supply – switching on, switching off, replacement or recharging of rechargeable batteries must be performed by an adult.

  • Transformers used with the infant swing are to be regularly examined for damage to the cord, plug, enclosure and other parts, and in the event of such damage, they shall not be used.

  • The infant swing shall only be used with the recommended transformer.

  • Do not allow children under the age of 3 to be present before assembling the product completely to avoid access to small and disassembled parts.

  • Keep the plastic bag away from children to avoid the risk of suffocation.

  • Do not place the product on uneven surfaces, near steps or stairs, slippery and wet surfaces, near swimming pools and other dangerous places and objects.

  • Do not allow children to play around the product while there is another child in it.

  • Do not attach to the product or give the child any other items or accessories that are not provided by the manufacturer.

  • Store away from children!

  • Use the highest position of the backrest only when the child is stable enough and does not lean.

  • Never use the toy bar to carry the reclined cradle.

INSTRUCTIONS AND WARNINGS FOR WORKING WITH BATTERIES – illustration B

Find the battery cover. Use a screwdriver to loosen the cap screws. Take it off. Insert 4 1.5 V type AA (LR6) alkaline batteries (not included), observing the polarity marked  on the bottom of the compartment. Put the battery cover back on and tighten the screws with a screwdriver. Do not overtighten.
To remove the batteries, repeat the steps.
Note: Restart the electronics if the mechanism becomes unstable. Turn off the power button, remove the batteries, and then insert them following the steps above.
IMPORTANT! The batteries are exhausted if the movement and volume of the music weaken. Replace them with new ones and dispose of used batteries in the designated  area.
WARNING!

  • Only an adult should handle the batteries.
  • Always use new batteries.
  • If you are not going to use the product for a long time, remove the batteries.
  • Remove used batteries from the product and dispose of them in the designated areas, not in household waste containers.
  • Do not dispose of batteries in a fire as there is a risk of explosion or leakage.
  • Non-rechargeable batteries are not to be recharged.
  • Use only the type of battery recommended by the manufacturer.
  • Different types of batteries are not to be mixed.
  • New and used batteries are not to be mixed.
  • Batteries are to be inserted with the correct polarity.
    Protect the environment by not disposing of this product in household waste containers (2002/96 / EU). Check the recommendations of local authorities.

ASSEMBLY INSTRUCTIONS

IMPORTANT! The diagrams and figures in this instruction are illustrative and indicative only.
Follow exactly the instructions and sequence for assembling and operating with the product.
Check the securing of the fixation after each operation.
Fixing a certain position in most cases is accompanied by a clicking sound.
Components – illustration A
After unpacking, make sure that all elements of illustration A are available.
Assembly of the structure – illustration C
Insert element 5 into element 4 and tighten the screws with a screwdriver.
WARNING! Make sure that the base is assembled correctly and is stable, this ensures the safety of your child!
Installing a canopy, toy bar and toys – illustration D
Fix item 1 to item 3. After placing the toy bar and making sure it is stable, attach item 2 – the toys, to it. If you want to use the canopy, fix element 7 for element 3. Then you can move the toys to the appropriate places on the canopy.

OPERATING INSTRUCTIONS

Backrest positions – illustration E
To change the angle of the backrest, press both buttons on the side at the same time and select the desired position.
To take advantage of 360-degree horizontal rotation, turn the seat.
Installing the restraint system – illustration F
Unbutton the mechanism before placing the baby. Place the baby and fasten the belts (you will hear a “click” sound when properly fixed in the buckle). Fasten the belts  around the child’s waist in a position that is comfortable for him.
Check the restraint system by pulling it slightly away from your child. The restraint system must remain attached.
Switching between functions „swing“ and „reclined cradle“
To use the function “reclined cradle”, lock item 4 by moving the button down. By pushing the button up, you use the
“swing” function, which moves left and right.
Use of control panel and remote control – илюстрация G
✓ Turning on/off button: When you press the button, the swing turn on and the indicator lights, ligtht up in green.
✓ Swinging speed button: 5 speed, every speed had a light. Press the button to turn on speed 1, press again for speed 2.
✓ Timer button: 3 timer – 15, 30 and 60 min. Press the button to move to the next timer. For turning off the function, hold the button for longer time.
✓ Songs buttons: 12 songs. Press the button to start from the first song and press again to move to the next song. For turning the function off, hold for longer time.
✓ Volume +/- : press these buttons to adjust the volumen of the songs.
✓ Natural sound button: Press the button to start from the first sound and press again to move to the next. To turn off the function, hold for a longer time.
✓ Button for automatic capture of the child’s movements. Press the button if you want the swing to turn on automatically when the child moves.
✓ When you use the remote control, the indicator lamp of the signal receiver will light up when the button is pressed.

INSTRUCTIONS FOR MAINTENANCE AND CLEANING

Cleaning
✓ Clean the upholstery of the product with a soft cloth soaked in warm water and mild soap. After cleaning, allow the product to dry completely. Do not use strong  detergents, bleach or detergents with abrasive particles. It is forbidden to clean the upholstery in a washing machine, dryer, dry cleaning, bleaching and spinning.
✓ Clean the structure with a damp soft cloth and mild soap. Dry with a dry soft cloth. DO NOT USE WET WIPES, STRONG CLEANERS, DISINFECTANTS OR  SUCH WITH ABRASIVE PARTICLES!
✓ Only clean toys with a soft, slightly damp cloth. DO NOT WET THEM!

Maintenance
Regularly check fixed and moving parts for looseness, damage or breakage. Do not repair the product yourself, but contact an authorized service center or the sales agent  from whom you purchased the product. Otherwise, your warranty will be void. Periodically clean the product. Do not leave the product to the harmful effects of external  factors

  • direct sunlight, rain, snow or wind. This can damage metal and plastic parts and bleach upholstery. Store the product in a dry and ventilated place, not in dusty, damp  rooms with very low or very high room temperatures.

Materials used: textile, metal, plastic.

Manufactured for Cangaroo
Importer: Moni Trade Ltd.
Address: Bulgaria, Sofia, Trebich, 1 Dolo Str.,
Phone number: 003592/936 07 90
Website: www.cangaroo-bg.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals