lorelli DULCE Feeding Chair Instruction Manual

lorelli DULCE Feeding Chair

Scan the QR code to get more product information and manual instruction in more languages. Download QR Scanner App onto your device.

WARNING!
Do not use the product when the two side arms been lifted up !

SAFETY REQUIREMENTS

1. WARNING! Never leave the child unattended!
2. WARNING! Always use the restraint system!
3. WARNING! Falling hazard: Prevent your child from climbing on the product!
4. WARNING! Do not use the product unless all components are correctly fitted and adjusted!
5. WARNING! Be aware of the risk of open fire and other sources of strong heat in the vicinity of the product!
6. WARNING! Be aware of the risk of tilting when your child can push its feet against a table or any other structure!
7. WARNING! Do not use the high chair until your child can sit up unaided!
8. WARNING! Do not use the high chair if any part is broken, torn or missing!
9. WARNING! To avoid injury ensure that your child is kept away when unfolding and folding this product!
10. WARNING! This product is intended for children able to sit up unaided and up to 3 years or a maximum weight of 15 kg!
11. WARNING! Periodically check the buttons and harness system for safety!
12. WARNING! Always use the chair on a flat even surface !
13. WARNING! Keep the chair away from children when don’t use it!
14. WARNING! The chair must not be used as a toy!
15. WARNING! images on the title page and in the instruction manual are only illustrative and may differ from the real product.
16. WARNING! Before using the product for the first time, remove all advertising material from it as well as the materials used to attach them to the product.

CLEANING AND CARE

1. Clean all fabrics with warm water and mild soap. Let them dry.
2. Heavy dirty spots clean with non abrasive cream.

ASSEMBLING

FRAME

1. Unpack the frame.

2. Press both red buttons on the rear tube and slide them down to open the rear tube. (fig.1 & 2).
   
   

3. Put front and rear tube into bases, facing inside with screw holes. (fig.3 & 4).
   
   

TRAY

1. Install the plastic part under the tray (fig. 5)
   

2. Hold either side of tray adjustment levers and pull out. (fig. 6)
   

3. The tray can be adjusted in 3 positions.

MOUNTING OF THE BASKET

1. Hang the two straps of the basket situated on both sides of the seat. (fig 7).
   

RECLINE BACKREST

1.  Pull the backrest adjustment lever upward to release the backrest.

2.  Adjust the seat and engage the lever in the new position. (fig. 8).
   

3.  The backrest can be adjusted while your child is on the seat.

ADJUSTING THE HEIGHT OF THE SEAT

1. Stand in front of the high chair.

2. Press and hold the two red buttons under seat at the same time.

3. Lift or lower the seat to desired position.

4. Release the buttons to secure the seat at the required height. (fig. 9).
   

5. To adjust the seat to highest level hold the frame with one hand and with the other hand pull upward the lever on top of backrest to required position.

FOLDING THE HIGH CHAIR

1. Unfasten restraint harness and remove your child from the high chair.
2. Remove the tray.
3. Stand behind the high chair. Move your body down, press two red buttons on either side of rear tube and push the rear tube upward until click to indicate that the high chair is secured in folded position. (fig. 10).
   

MOUNTING THE SOFT PART OF THE SEAT

1. Place the soft part on the plasticseat so as to wrap the backrest. (fig.11).

2. Pass the seat belts through the backrest and attach them with the clips as shown on the picture (fig.12).
   

**WARNING! Do not use the product when the two side arms been lifted up! (fig. 13)

**

CUSTOMER SUPPORT

Didis Ltd.
Bulgaria, Shumen, 6 Trakia-iztok Street
Phone: +3595 4850 830
e-mails: home.market@didis-ltd.com;
erport@didis-ltd.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>