ELSEMA GLR43301240 Relay Out RX 433MHz 240V Supply & Relay Owner’s Manual
- June 4, 2024
- ELSEMA
Table of Contents
GLR43301240 Relay Out RX 433MHz 240V Supply & Relay
Owner’s Manual
1-Channel 433MHz Receiver with 16A
Relay Output- GLR43301240
GLR43301240
1-Channel 433MHz Gigalink, Receiver with Mains AC Supply
Features
- Supply voltage 240VAC (also available in 110-120VAC supply for international markets)
- High-efficiency toroidal transformer
- High capacity output relay
- Pluggable type terminal blocks for easy installation
- Test push buttons for the relay
- Momentary, latching, timed and security latching output modes can be selected by the user.
- Optional QM150 bracket available for easy mounting to cases or walls
- Also available in an IP66-rated case for outdoor installations
- Power ON LED indicator
Applications
- Pump Control
- Long-distance light control
- On/Off applications in agricultural devices
- Basic Telemetry eg. Water level indication
- Security alarm
Description
The GIGALINK™ , GLR43301240 is the most advanced Remote Control technology
available in the world today.
GIGALINK™ is an invention that has revolutionized the entire Remote Control
technology including Elsema’s earlier version of the FMT- … and FMR- … series.
The GLR43301240 state-of-the-art invention brings a new dimension to the world
of Remote Control technology in domestic, commercial, and industrial
applications.
The toroidal transformer on this receiver is 25-30% more efficient than the
conventional types. It has a low operating temperature, low hum, and low stray
magnetic field.
Available with Options
| 
---|---
GLR43301240
1- Channel 240VAC
Supply| GLR43301240E
1- Channel 240VAC Supply
IP66 Rated enclosure
Code Programming
For code programming, please refer to the separate programming instructions.
When programming is completed and the GIGALINK cable is removed from the
receiver-coding socket, the 3-way dip switch is used to select different
output modes. This is described below.
Different Modes for the Output
3-Way DIP Switch Mode Settings
The output relay will respond in the following manner when receiving the
correct signal from a transmitter
| “Momentary”: Relay on, only while the correct signal is received
---|---
| “Latching”: Relay alternates at every correct incoming signal
| “Delayed Off 1”: Relay on, but delayed off for 1-10 seconds, adjustable by
trimpot
| “Delayed Off 2”: Relay on, but delayed off for 10-300 seconds, adjustable by
trimpot
| “Security latching “: Relay will energize until supply to the receiver is
momentarily interrupted
| “On-Off”: This mode requires a 2-channel Tx.
Channel 1 will always energize the relay
Channel 2 will always de-energize the relay
To use this mode you need to do channelized code programming. Do not use
single-code programming.
| “On-Off”: This mode requires a 4-channel Tx.
Channel 3 will always energize the relay
Channel 4 will always de-energize the relay
To use this mode you need to do channelized code programming. Do not use
single-code programming.
Momentary – Output is active for as long as the transmitter button is
pressed.
This is a standard mode on most automatic gates or garage door openers.
Latching – Output remains active until the next press of the transmitter
button.
Similar to switching “on” and “off” a light.”
Security Latching – Output remains active until power to the receiver is
removed. Similar to security alarms and fire alarms.
Customized Software
Custom output modes can be programmed to do special functions. Call Elsa for
more details.
240 AC Supply, Antenna, and Relay Connections
AC power supply and relay connections are via the pluggable type terminal
block. The antenna is via a two-way pluggable type terminal block. Do not
connect the supply to the 2.5-mm coding socket since the connection will
damage the microcontroller.
Applications
The receiver output can be set to different modes which allow it to be used in
many diverse applications such as automatic gates, security, timer-controlled
outputs, and simple on/off functions, etc.
Unique Code System
The microcontroller EEPROM allows large volume users to have a unique code.
This enables Elsema to offer everyone “your own” radio control.
Products in the Range
Technical Data
| Supply Voltage | 240Volts AC Mains (110-120VAC available on request) |
|---|---|
| Current Consumption | 18mA, on 240V AC |
| Receiving Freq | 433.920MHz (Other frequencies are available on request. Refer |
to the table below )
Operating Temperature Range| _5 to 50°C
Outputs| Cho over relay output, rated at 16 Amps of resistive load and up to 8
Amps of inductive load.
Connections| Supply & Outputs – pluggable type terminal blocks
Antenna| Elsa’s ANT433MHz series antennas or pieces of approximately 690 mm
long wire for short-range applications.
Dimensions| 130 x 70 x 37mm
Mounting hole size| 3.97 mm or 5/32″
Useable Transmitters| All Elsema Type 433MHz OLT-… series
Available Frequencies
| SF2 | 433.664 MHz |
|---|---|
| SF3 | 433.408 MHz |
| SF4 | 433.152 MHz |
| SF5 | 434.688MHz |
| SF6 | 434.432 MHz |
Special Frequency products can be made upon request. There is a minimum quantity order of 20. Please quote the Correct SF number when ordering transmitters on special frequencies.
Block Diagram
GLR43301240 Application
Manufactured by
Elsa Pty Ltd
31 Tarlington Place, Smithfield
NSW 2164, Australia.
Ph: 02 9609 4668
Website: http://www.elsema.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>