DynaLock EMK-VON Motorized Latch Pullback Kit User Manual
- June 3, 2024
- DynaLock
Table of Contents
DynaLock EMK-VON Motorized Latch Pullback Kit
Pullback Kit
The DynaLock EMK-VON is a field-installable motorized latch pullback kit for Von Duprin 33/35 and 98/99 series exit devices. Retrofit existing mechanical exit devices to electric latch retraction, while maintaining the UL Listing. The easy to install, robust kit comes equipped with “Push to Set” technology, to simplify post installation adjustments.
Features
- Smart module – Provides on-board diagnostics with audible feedback for adjustment and power issues.
- Push to Set – 5 second electronic adjustment, for easy post installation adjustments.
- Continuous-duty electric dogging – Auto retraction if dogged push pad is pulled from position.
- Low current draw – Compatible with most 24VDC, 1A (or greater) regulated power supplies.
- Field-switchable to “high-torque” mode.
- Up to 500′ wire run with (2) 18 Ga. wires. 8′ cable with quick-connect for smart module, to easily connect power supply leads.
Input Voltage Range: 22 to 28 VDC
Average Peak Current: 1.0A
Average Current Hold: 180mA
- MODEL EMK-VON
- PRODUCT Motorized Latch Pullback Kit
- WEIGHT 2.0 Lbs.
2022-A Catalog Tel: 1.877.DYNALOCK Page 11 Fax: 1.860.585.0338 ©2021 DynaLock Corp.
Documents / Resources
|
DynaLock EMK-VON Motorized Latch Pullback
Kit
[pdf] User Manual
EMK-VON Motorized Latch Pullback Kit, EMK-VON, Motorized Latch Pullback Kit,
Latch Pullback Kit, Pullback Kit
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>