rizoma ZVP018 Turn Signals Kit User Manual

rizoma ZVP018 Turn Signals Kit

Product Information

Welcome to Rizoma! This user manual contains important instructions for the installation and usage of Rizoma products. It is essential to read and follow these instructions carefully to ensure the proper functioning of the product. If you have any doubts or questions, please contact an authorized RIZOMA dealer.

Rizoma products may not be compatible with your motorcycle or other aftermarket accessories previously installed. For your safety, it is recommended to always consult your trusted authorized dealer before making any modifications.

O.E.M. stands for Original Equipment Manufacturer, referring to original components.

Product Usage Instructions

1. Carefully read, understand, and follow the instructions provided in this manual. They are an essential part of the product. If you have any doubts or questions regarding the installation or usage of your RIZOMA product, please consult your authorized RIZOMA dealer for assistance.
2. For proper installation, ensure that all fastenings are done after correctly positioning the accessories. Avoid forcing any moving parts once they are locked to maintain the product’s integrity and functionality.
3. After installing any Rizoma product, check that all related components of the motorcycle, such as brakes, throttle, clutch, lights, and steering, are functioning properly. We recommend periodic checks, especially after long trips or extended periods of non-use.
4. Regularly inspect and maintain your RIZOMA products. The frequency of inspection should increase with the amount of riding. If you notice any leaks, bends, deformations, cracks, chips, or signs of wear, no matter how slight, have your RIZOMA dealer inspect the products before riding again. Do not attempt to repair or modify Rizoma products or their components; always replace them with Rizoma original components.
5. Before installing turn signals, disconnect the motorcycle’s battery to avoid electrical shock hazards.
6. Please note that the kit indicatori (turn signals) mentioned in the manual has the part number ZVP018. Ensure the completeness of the kit by referring to the part list provided.
7. The difficulty level and time of assemblage mentioned in the manual do not include the removal of OEM components. Follow the instructions and regulations provided. Keep in mind that these turn signals are intended for off-road use only. Using them on-road
   could potentially lead to accidents, personal injury, or death if other motorists or pedestrians fail to see you.

Before you start

We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country.

Attention: This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.

1. Carefully read, understand and follow these instructions, they are an essential part of the product.  If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
2. For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
3. After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
   Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components.
   Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact your RIZOMA dealer.
   O.E.M.: original equipment manufacturer.

Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. The warrantee is not valid for any electric wires cutting or any product modify or tampering. Warning: Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others. WARNING: TO CLEAN YOUR PRODUCT DON’T USE DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR PRODUCT, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.

Turn signals do not comply with applicable DOT or other Federal Regulations. For off-road use only. Use on-road could cause another motorist or pedestrian not to see you, resulting in an accident, personal injury or death. Improper installation could damage the electrical system of the motorcycle and cause a fire, resulting in personal injury or death. Electrical shock hazard. Disconnect the battery before starting to install turn signals.

Step 1

Warning : the warrantee is not valid for any electric wires cutting or any product modify or tampering. Don’t modify the electrical connections.

INSTALLATION

Your garantee will not apply if the indicator has not been correctly installed and connected to the electrical supply on your motorbike. Do not carry out the installation unless you are specifically trained to do so; otherwise, please contact an authorized dealer Rizoma. Your garantee does not apply to damage due to wrong connection or excess voltage. Improper mechanical installation or orientation of the indicator may invalidate your motorbike’s roadworthiness and insurance protection, or even lead to accidents. Check that your indicator are securely fitted before you ride your motorbike. Your indicator may heat up during use. Contact with bare skin or heat-sensitive objects may lead to damage or injury. Make sure that your motorbike is standing firmly before you start work,
as a fall may lead to damage to the motorbike or injury to you or others.

CONNECTIONS

Step 3

Disconnect the battery before starting to install the indicators. To avoid damage to the electrical system of the bike, for the electrical connection of the indicators is recommended to use the Rizoma electrical wiring. Then lay the wiring harnesses in such a way that they are protected from splashing water and fix them appropriately. Then connect the battery and test the correct operation of the indicators. Mount the heating elements, in such a way as to appropriately divert the internal heat. It is advisable to check before each trip the correct operation. The resistances, during prolonged operation, overheat. Make sure that, because of the heat, no thing or person can be harmed.

REMOVE STEERING COVER

Step 4

Attention: before installing the indicator kit remove the original steering cover, the covers and the glove compartment. Refer to the vehicle workshop manual for disassembly.

REMOVE COVERS

Step 5

REMOVE GLOVE COMPARTMENT

Attention : when removing the storage compartment, disconnect the electrical wiring and the lock cable. Be careful not to damage the wiring

REMOVE ORIGINAL TURN SIGNAL

Attention: disassembly valid for both sides.

INSTALL TURN SIGNAL

Attention : insert the cover tooth into the original chassis housing. During the mounting take care not pinch the wiring.

Attention: mounting valid for both sides.

INSTALL TURN SIGNAL

Attention: mounting valid for both sides.

REMOVE ORIGINAL TURN SIGNAL

Attention: disassembly valid for both sides.

INSTALL TURN SIGNAL

Attention: mounting valid for both sides.

Attention: insert the cover tooth into the original chassis housing.
During the mounting take care not pinch the wiring.

INSTALL TURN SIGNAL

Attention: mounting valid for both sides.

POSITION WIRING

Attention: it is recommended to fix the resistance and wiring of the indicators with a clamp to the original system.

Warnings

RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury. The action depicted is performed by professionals under strictly controlled riding conditions. Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy. All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full face helmet), that has been approved by ANSI , SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full finger gloves, boots, and body armor. Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle.
Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.

Legal notes

Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® srl declines any responsibility for a different use of its products.

References

• Home - Rizoma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>